Influence of Interference Deviation on Four-Beam Interference with Circular Polarization

Xiao Wu

doi:10.3788/LOP55.061405

[1] Liu Y, Liu S, Zhang X. Fabrication of three-dimensional photonic crystals with two-beam holographic lithography[J]. Applied Optics, 45, 480-483(2006). http://europepmc.org/abstract/MED/16463731

[2] Lin Y, Harb A, Lozano K et al. Five beam holographic lithography for simultaneous fabrication of three dimensional photonic crystal templates and line defects using phase tunable diffractive optical element[J]. Optics Express, 17, 16625-16631(2009). http://www.ncbi.nlm.nih.gov/pubmed/19770878

[3] Burrow G M, Gaylord T K. Multi-beam interference advances and applications: nano-electronics, photonic crystals, metamaterials, subwavelength structures, optical trapping, and biomedical structures[J]. Micromachines, 2, 221-257(2011). http://www.oalib.com/paper/159558

[4] Krishnamoorthy A, Chanda K, Murarka S P et al. Self-assembled near-zero-thickness molecular layers as diffusion barriers for Cu metallization[J]. Applied Physics Letters, 78, 2467-2469(2001). http://scitation.aip.org/content/aip/journal/apl/78/17/10.1063/1.1365418

[5] Kruger J, Plass R, Cevey L et al. High efficiency solid-state photovoltaic device due to inhibition of interface charge recombination[J]. Applied Physics Letters, 79, 2085-2087(2001). http://scitation.aip.org/content/aip/journal/apl/79/13/10.1063/1.1406148

[6] Xu D, Chen K P, Ohlinger K et al. Nanoimprinting lithography of a two-layer phase mask for three-dimensional photonic structure holographic fabrications via single exposure[J]. Nanotechnology, 22, 035303(2011). http://www.ncbi.nlm.nih.gov/pubmed/21149952

[7] Goldenberg L M, Lisinetskii V, Gritsai Y et al. Second order DFB lasing using reusable grating inscribed in azobenzene-containing material[J]. Optical Materials Express, 2, 11-19(2012). http://www.opticsinfobase.org/abstract.cfm?uri=ome-2-1-11

[8] Ebendorff-Heidepriem H, Ehrt D. Formation and UV absorption of cerium, europium and terbium ions in different valencies in glasses[J]. Optical Materials, 15, 7-25(2000). http://www.sciencedirect.com/science/article/pii/S0925346700000185

[9] Goldenberg L M, Gritsai Y, Kulikovska O et al. Three-dimensional planarized diffraction structures based on surface relief gratings in azobenzene materials[J]. Optics Letters, 33, 1309-1311(2008). http://www.ncbi.nlm.nih.gov/pubmed/18552941

[10] Zhou X P, Shu J, Lu B J et al. Two-wavelength division demultiplexer based on triangular lattice photonic crystal resonant cavity[J]. Acta Optica Sinica, 33, 0123001(2013).

[11] Isakov D S, Kundikova N D, Miklyaev Y V. Interference lithography for the synthesis of three-dimensional lattices in SU-8: interrelation between porosity, an exposure dose and a grating period[J]. Optical Materials, 47, 473-477(2015). http://www.sciencedirect.com/science/article/pii/S0925346715003833

[12] Xiong P X, Jia X, Jia T Q et al. Two-dimensional complex nano-micro patterning on GaP and ZnSe surface created by the interference of three femtosecond laser beams[J]. Acta Physica Sinica, 59, 311-316(2010).

[13] Yang H D, Li X H, Li G Q et al. Silicon surface microstructures created by 1064 nm Nd∶YAG nanosecond laser[J]. Acta Physica Sinica, 60, 027901(2011).

[14] Li C, Cheng G H, Stoian R. Investigation of femtosecond lase-induced periodic surface structure ontungsten[J]. Acta Optica Sinica, 36, 0532001(2016).

[15] Zhong M L, Li Y. Special introduction: ultra-fast laser processing and micro-nano manufacturing[J]. Chinese Journal of Laser, 44, 0102000(2017).

[16] Zhang J, Feng B R, Guo Y K. Theoretical analysis for fabricating nanometer hole array with 4 laser beams interferencelithography[J]. Acta Photonica Sinica, 32, 398-401(2003).

[17] Cheng X J, Zhang Z L, Ge H L. Fabricating three-dimensional periodic micro-structure with planar defects via a single exposure[J]. Acta Physica Sinica, 61, 174211(2012).

[18] Li Y, Chen H, Dai K J. Fabrication of graphene nanomeshes by the femtosecond four-beam interference technique[J]. Micronanoelectronic Technology, 50, 662-666(2013).

[19] Zhang J, Feng B R, Guo Y K. Comparison between double exposure with two laser beams interference and single exposure with four laser beams[J]. Opto-Electronic Engineering, 32, 21-24(2005).

[20] Liang W Y, He R B, Lin D R et al. Influence of beam polarizations on holographic fabrication of triangular photonic crystals[J]. Laser & Optoelectronics Progress, 53, 091601(2016).

[21] Wu X. Influence study of polarization on three-beam interference[J]. Acta Optica Sinica, 35, 1012002(2015).

[22] Wang D, Wang Z, Zhang Z et al. Effects of polarization on four-beam laser interference lithography[J]. Applied Physics Letters, 102, 081903(2013). http://scitation.aip.org/content/aip/journal/apl/102/8/10.1063/1.4793752

[23] Zhang J, Wang Z, Di X et al. Effects of azimuthal angles on laser interference lithography[J]. Applied Optics, 53, 6294-6301(2014). http://europepmc.org/abstract/med/25322110

[24] Ma L N, Zhang J, Jiang S L et al. Influence of patterns quality of multi-beam interference lithography caused by the deviations of incidence azimuth angle and intensity of light[J]. Acta Photonica Sinica, 44, 1011003(2015).