[1] K Nishijima, K Harada, T Nakano et al. Analysis of double step-down two-phase buck converter for VRM. INTELEC 05 - Twenty-Seventh International Telecommunications Conference, 497(2005).
[2] P S Shenoy, O Lazaro, R Ramani et al. A 5 MHz, 12 V, 10 A, monolithically integrated two-phase series capacitor buck converter. 2016 IEEE Applied Power Electronics Conference and Exposition (APEC), 66(2016).
[3] A Abdulslam, P P Mercier. A continuous-input-current passive-stacked third-order buck converter achieving 0.7W/mm2 power density and 94% peak efficiency. 2019 IEEE International Solid- State Circuits Conference (ISSCC), 148(2019).
[4] K Hata, Y Yamauchi, T Sai et al. 48V-to-12V dual-path hybrid DC-DC converter. 2020 IEEE Applied Power Electronics Conference and Exposition (APEC), 2279(2020).
[5] Z C Ye, R A Abramson, R C N Pilawa-Podgurski. A 48-to-6 V multi-resonant-doubler switched-capacitor converter for data center applications. 2020 IEEE Applied Power Electronics Conference and Exposition (APEC), 475(2020).
[6] Z Y Xia, J Stauth. A two-stage cascaded hybrid switched-capacitor DC-DC converter with 96.9% peak efficiency tolerating 0.6V/μs input slew rate during startup. 2021 IEEE International Solid- State Circuits Conference (ISSCC), 256(2021).
[7] Z Tong, J Huang, Y Lu et al. A 42W reconfigurable bidirectional power delivery voltage-regulating cable. IEEE International Solid-State Circuit Conference (ISSCC), 192(2023).
[8] C Hardy, H P Le. A 21W 94.8%-efficient reconfigurable single-inductor multi-stage hybrid DC–DC converter. IEEE International Solid-State Circuit Conference (ISSCC), 190(2023).
[9] P Renz, M Kaufmann, M Lueders et al. A fully integrated 85%-peak-efficiency hybrid multi ratio resonant DC-DC converter with 3.0-to-4.5V input and 500μA-to-120mA load range. 2019 IEEE International Solid- State Circuits Conference (ISSCC), 156(2019).
[10] P H McLaughlin, J S Rentmeister, M H Kiani et al. Analysis and comparison of hybrid-resonant switched-capacitor DC–DC converters with passive component size constraints. IEEE Trans Power Electron, 36, 3111(2021).
[11] C H Chan, L Cheng, W Deng et al. Trending IC design directions in 2022. J Semicond, 43, 071401(2022).
[12] S W Zhen, R Yang, D M Wu et al. Design of hybrid dual-path DC-DC converter with wide input voltage efficiency improvement. 2021 IEEE International Symposium on Circuits and Systems (ISCAS), 1(2021).
[13] X Yang, H X Cao, C K Xue et al. An 8A 998A/inch3 90.2% peak efficiency 48V-to-1V DC-DC converter adopting on-chip switch and GaN hybrid power conversion. 2021 IEEE International Solid- State Circuits Conference (ISSCC), 466(2021).
[14] X Yang et al. A 5A 94.5% peak efficiency 9~16V-to-1V dual-path series-capacitor converter with full duty range and low V·A metric. IEEE International Solid-State Circuit Conference (ISSCC), 196(2023).
[15] W Zeng, G Cai, C Lee et al. A 12V-input 1V–1.8V-output 93.7% peak efficiency dual-inductor quad-path hybrid DC–DC converter. IEEE International Solid-State Circuit Conference (ISSCC), 200(2023).
[16] C Schaef, S Weng, B Choi et al. A 93.8% peak efficiency, 5V-input, 10A max ILOAD flying capacitor multilevel converter in 22nm CMOS featuring wide output voltage range and flying capacitor precharging. 2019 IEEE International Solid-State Circuits Conference (ISSCC), 146(2019).
[17] K Wei, Y Ramadass, D B Ma. A direct 12V/24V-to-1V 3W 91.2%-efficiency tri-state DSD power converter with online VCF rebalancing and In-situ precharge rate regulation. 2020 IEEE International Solid-State Circuits Conference (ISSCC), 190(2020).
[18] Y Yamauchi, T Sai, K Hata et al. 0.55 W, 88%, 78 kHz, 48 V-to-5 V fibonacci hybrid DC–DC converter IC using 66 mm3 of passive components with automatic change of converter topology and duty ratio for cold-crank transient. IEEE Trans Power Electron, 36, 9273(2021).
[19] T X Hu, M Huang, Y Lu et al. A 4A 12-to-1 flying capacitor cross-connected DC-DC converter with inserted D>0.5 control achieving >2x transient inductor current slew rate and 0.73 × theoretical minimum output undershoot of DSD. 2022 IEEE International Solid- State Circuits Conference (ISSCC), 1(2022).
[20] J Y Ko, Y Huh, M W Ko et al. A 4.5V-input 0.3-to-1.7V-output step-down always-dual-path DC-DC converter achieving 91.5%-efficiency with 250mΩ-DCR inductor for low-voltage SoCs. 2021 Symposium on VLSI Circuits, 1(2021).
[21] G G Cai, Y Lu, R P Martins. An SC-parallel-inductor hybrid buck converter with reduced inductor voltage and current. IEEE J Solid State Circuits, 1(2022).
[22] K Kesarwani, R Sangwan, J T Stauth. Resonant-switched capacitor converters for chip-scale power delivery: Design and implementation. IEEE Trans Power Electron, 30, 6966(2015).
[23] G Cai, Y Lu, R P Martins. A compact 12V-to-1V 91.8% peak efficiency hybrid resonant switched-capacitor parallel inductor (ReSC-PL) buck converter. IEEE International Solid-State Circuit Conference (ISSCC), 198(2023).
[24] T H Yang, Y H Wen, Y J Ouyang et al. A 0.03mV/mA low crosstalk and 185nA ultra-low-quiescent single-inductor multiple-output converter assisted by 5-input operational amplifier for 94.3% peak efficiency and 3.0W driving capability. 2021 IEEE International Solid- State Circuits Conference (ISSCC), 267(2021).
[25] H Han, M W Ko, J H Cho et al. A monolithic 48V-to-1V 10A quadruple step-down DC-DC converter with hysteretic copied on-time 4-phase control and 2 × slew rate all-hysteretic mode. 2022 IEEE Symposium on VLSI Technology and Circuits (VLSI Technology and Circuits), 182(2022).
[26] T Hu, M Huang, Y Lu et al. A 12V-to-1V quad-output switched-capacitor buck converter with shared DC capacitors achieving 90.4% peak efficiency and 48mA/mm3 power density at 85% efficiency. IEEE International Solid-State Circuit Conference (ISSCC), 184(2023).
[27] W Hung, C Chen, Y Huang et al. A double step-down dual-output converter with cross regulation of 0.025mV/mA and improved current balance. IEEE International Solid-State Circuit Conference (ISSCC), 188(2023).
