[1] Liu Y S, Han P L, Hu S F et al. Development of laser additive manufacturing with metallic materials and its application in aviation engines[J]. Aeronautical Manufacturing Technology, 454, 62-67(2014).
[2] Lin X, Huang W D. Laser additive manufacturing of high-performance metal components[J]. Scientia Sinica (Informationis), 45, 1111-1126(2015).
[3] Xiao Z N, Liu T T, Liao W H et al. Microstructure and mechanical properties of TC4 titanium alloy formed by selective laser melting after heat treatment[J]. Chinese Journal of Lasers, 44, 0902001(2017).
[4] Qian D Y, Chen C J, Zhang M et al. Study on microstructure and micro-mechanical properties of porous aluminum alloy fabricated by selective laser melting[J]. Chinese Journal of Lasers, 43, 0403002(2016).
[5] Pan A Q, Zhang H, Wang Z M. Molten pool microstructure of Ni-based single crystal superalloys fabricated by selective laser melting[J]. Laser & Optoelectronics Progress, 54, 071402(2017).
[6] Lin H, Yang Y Q, Zhang G Q et al. Tribological performance of medical CoCrMo alloy fabricated by selective laser melting[J]. Acta Optica Sinica, 36, 1114003(2016).
[7] Yang Q, Lu Z L, Huang F X et al. Research on status and development trend of laser additive manufacturing[J]. Aeronautical Manufacturing Technology, 507, 26-31(2016).
[8] Yin H, Bai P K, Liu B et al. Present situation and development trend of selective laser melting technology for metal powder[J]. Hot Working Technology, 39, 140-144(2010).
[11] Wang P, Huang Z H, Qi W J et al. Effect of the 3D printing process parameters based on SLM technology on the structure defect of 316 stainless steel[J]. Welding Digest of Machinery Manufacturing, 23, 2-7(2016).
[12] Wang D, Yang Y Q, Huang Y L et al. Impact of inter-laser scan strategy on quality of direct fabrication metal parts in SLM process[J]. Laser Technology, 34, 447-451(2010).
[14] Wang L, Wei Q S, He W T et al. Influence of powder characteristic and process parameters on the SLM formability[J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 40, 20-23(2012).
[15] Liu J H, Shi J G, Li Y. Study on selective laser melting process and forming of AlSi10Mg alloy powder[J]. Journal of Heilongjiang University of Science and Technology, 25, 509-515(2015).
[16] Deng S S, Yang Y Q, Li Y et al. Planning of area-partition scaning path and its effect on residual stress SLM molding parts[J]. Chinese Journal of Lasers, 43, 1202003(2016).