Large Depth-to-Diameter Ratio and Inverted Cone Micro-Hole Machining System with Controllable Trajectory and Its Application

Shan Wang; Wei Zhao; Hualong Zhao; Feng Zhou; Guoqiang Liu; Xiaojun Yang

doi:10.3788/LOP202259.1122002

Journals >Laser & Optoelectronics Progress >Volume 59 >Issue 11 >Page 1122002 > Article

Laser & Optoelectronics Progress
Vol. 59, Issue 11, 1122002 (2022)

Large Depth-to-Diameter Ratio and Inverted Cone Micro-Hole Machining System with Controllable Trajectory and Its Application

Shan Wang^1、2, Wei Zhao¹, Hualong Zhao^1、*, Feng Zhou³, Guoqiang Liu⁴, and Xiaojun Yang^4、**

Author Affiliations

¹State Key Laboratory of Transient Optics and Photonics, Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi’an 710119, Shaanxi , China

²University of Chinese Academy of Sciences, Beijing 100049, China

³FAW Wuxi Fuel Injection Equipment Research Institute, Wuxi 214063, Jiangsu , China

⁴Xi’an Micromach Technology Co., Ltd., Xi’an 710119, Shaanxi , China

show less

DOI: 10.3788/LOP202259.1122002 Cite this Article Set citation alerts

Shan Wang, Wei Zhao, Hualong Zhao, Feng Zhou, Guoqiang Liu, Xiaojun Yang. Large Depth-to-Diameter Ratio and Inverted Cone Micro-Hole Machining System with Controllable Trajectory and Its Application[J]. Laser & Optoelectronics Progress, 2022, 59(11): 1122002 Copy Citation Text

show less

References

[2] Guo Z. Study on drilling technology of FPC with different polarized light[D](2017).