[1] R. A. Negres, G. M. Abdulla, D. A. Cross, Z. M. Liao, C. W. Carr. Probability of growth of small damage sites on the exit surface of fused silica optics. Opt. Express, 20, 13030(2012).
[2] R. A. Negres, M. A. Norton, D. A. Cross, C. W. Carr. Growth behavior of laser-induced damage on fused silica optics under UV, ns laser irradiation. Opt. Express, 18, 19966(2010).
[3] M. Spaeth, P. Wegner, T. Suratwala, M. Nostrand, J. Bude, A. Conder, J. Folta, J. Heebner, L. Kegelmeyer, B. MacGowan. Optics recycle loop strategy for NIF operations above UV laser-induced damage threshold. Fusion Sci. Technol., 69, 265(2016).
[4] S. Palmier, L. Gallais, M. Commandré, P. Cormont, R. Courchinoux, L. Lamaignère, J. L. Rullier, P. Legros. Optimization of a laser mitigation process in damaged fused silica. Appl. Surf. Sci., 255, 5532(2009).
[5] P. Cormont, P. Combis, L. Gallais, C. Hecquet, L. Lamaignère, J. L. Rullier. Removal of scratches on fused silica optics by using a CO2 laser. Opt. Express, 21, 28272(2013).
[6] Y. Jiang, S. He, W. Liao, C. Yao, H. Wang, B. Wang, S. Guan, R. Qiu, D. Guo, X. Xiang. Theoretical and experimental investigations of localized CO2 laser-fused silica interactions and thermo-mechanical properties of mitigated sites. J. Non-Cryst. Solids, 515, 1(2019).
[7] M. J. Matthews, S. T. Yang, N. Shen, S. Elhadj, R. N. Raman, G. Guss, I. L. Bass, M. C. Nostrand, P. J. Wegner. Micro-shaping, polishing, and damage repair of fused silica surfaces using focused infrared laser beams. Adv. Eng. Mater., 17, 247(2015).
[8] T. Doualle, L. Gallais, S. Monneret, S. Bouillet, A. Bourgeade, C. Ameil, L. Lamaignère, P. Cormont. Development of a laser damage growth mitigation process, based on CO2 laser micro processing, for the Laser MegaJoule fused silica optics. Proc. SPIE, 10014, 2016.
[9] W. Zheng, X. Wei, Q. Zhu, F. Jing, D. Hu, J. Su, K. Zheng, X. Yuan, H. Zhou, W. Dai. Laser performance of the SG-III laser facility. High Power Laser Sci. Eng., 4, e21(2016).
[10] T. Doualle, A. Ollé, P. Cormont, S. Monneret, L. Gallais. Laser-induced birefringence measurements by quantitative polarized-phase microscopy. Opt. Lett., 42, 1616(2017).
[11] A. Nakamura, T. Mizuta, Y. Shimotsuma, M. Sakakura, T. Otobe, M. Shimizu, K. Miura. Picosecond burst pulse machining with temporal energy modulation [Invited]. Chin. Opt. Lett., 18, 123801(2020).
[12] C. C. Zhang, W. Liao, K. Yang, T. X. Liu, Y. Bai, L. J. Zhang, X. L. Jiang, J. Chen, Y. L. Jiang, H. J. Wang, X. Y. Luan, H. Zhou, X. D. Yuan, W. G. Zheng. Fabrication of concave microlens arrays by local fictive temperature modification of fused silica. Opt. Lett., 42, 1093(2017).
[13] C. Zhang, L. Zhang, X. Jiang, B. Jia, W. Liao, R. Dai, J. Chen, X. Yuan, X. Jiang. Influence of pulse length on heat affected zones of evaporatively-mitigated damages of fused silica optics by CO2 laser. Opt. Lasers Eng., 125, 105857(2020).
[14] S. Elhadj, M. J. Matthews, S. T. Yang. Combined infrared thermal imaging and laser heating for the study of materials thermophysical and processing properties at high temperatures. Crit. Rev. Solid State Mat. Sci., 39, 175(2014).
[15] C. Tan, L. Zhao, M. Chen, J. Cheng, Z. Yin, Q. Liu, H. Yang, W. Liao. Optical modulation of repaired damage site on fused silica produced by CO2 laser rapid ablation mitigation. Chin. Phys. B, 29, 054209(2020).
[16] L. Gallais, P. Cormont, J.-L. Rullier. Investigation of stress induced by CO2 laser processing of fused silica optics for laser damage growth mitigation. Opt. Express, 17, 23488(2009).
[17] R. M. Brusasco, B. Penetrante, J. A. Butler, L. W. Hrubesh. Localized CO2 laser treatment for mitigation of 351-nm damage growth in fused silica. Proc. SPIE, 4679, 40(2002).
[18] M. D. Feit, A. M. Rubenchik. Mechanisms of CO2 laser mitigation of laser damage growth in fused silica. Proc. SPIE, 4932, 91(2004).
[19] G. Guss, I. Bass, V. Draggoo, R. Hackel, S. Payne, M. Lancaster, P. Mak. Mitigation of growth of laser initiated surface damage in fused silica using a 4.6-micron wavelength laser. Proc. SPIE, 6403, 64030M(2007).
[20] T. He, C. Wei, Z. Jiang, Y. Zhao, J. Shao. Super-smooth surface demonstration and the physical mechanism of CO2 laser polishing of fused silica. Opt. Lett., 43, 5777(2018).
[21] T. He, C. Wei, Z. Jiang, Z. Yu, Z. Cao, J. Shao. Numerical model and experimental demonstration of high precision ablation of pulse CO2 laser. Chin. Opt. Lett., 16, 041401(2018).
[22] L. J. Zhang, C. C. Zhang, J. Chen, Y. Bai, Y. L. Jiang, X. L. Jiang, H. J. Wang, X. Y. Luan, X. D. Yuan, W. Liao. Formation and control of bubbles during the mitigation of laser-induced damage on fused silica surface. Acta Phys. Sin., 67, 016103(2018).
[23] C. Tan, L. Zhao, M. Chen, J. Cheng, W. Liao. Experimental and theoretical investigation of localized CO2 laser interaction with fused silica during the process of surface damage mitigation. Results Phys., 16, 102936(2020).
[24] I. L. Bass, G. M. Guss, M. J. Nostrand, P. J. Wegner. An improved method of mitigating laser-induced surface damage growth in fused silica using a rastered, pulsed CO2 laser. Proc. SPIE, 7842, 784220(2010).