• Laser & Optoelectronics Progress
  • Vol. 58, Issue 19, 1912005 (2021)
Lü Sihang1, Hongchang Ding2, Yang Xiang1、*, and Yongkun Liu1
Author Affiliations
  • 1College of Optoelectronic Engineering, Changchun University of Science and Technology, Changchun , Jilin 130022, China
  • 2College of Mechanical and Electrical Engineering, Changchun University of Science and Technology, Changchun , Jilin 130022, China
  • show less
    DOI: 10.3788/LOP202158.1912005 Cite this Article Set citation alerts
    Lü Sihang, Hongchang Ding, Yang Xiang, Yongkun Liu. Surface Welding Defect Detection Based on Michelson Interferometer[J]. Laser & Optoelectronics Progress, 2021, 58(19): 1912005 Copy Citation Text show less
    Principle of the surface defect detection system
    Fig. 1. Principle of the surface defect detection system
    Interference signal diagram
    Fig. 2. Interference signal diagram
    Picture of the weld
    Fig. 3. Picture of the weld
    Scanning results of our system. (a) Two-dimensional contour map; (b) welding track map
    Fig. 4. Scanning results of our system. (a) Two-dimensional contour map; (b) welding track map
    Inspection results of welding surface defects
    Fig. 5. Inspection results of welding surface defects
    Inspection result of the pores
    Fig. 6. Inspection result of the pores
    Areas with qualified welding quality
    Fig. 7. Areas with qualified welding quality
    Missing solder area
    Fig. 8. Missing solder area
    Misalignment welding
    Fig. 9. Misalignment welding
    Number of measurementsSystematic measurementManual measurement
    13.1253.260
    23.1453.210
    33.1543.150
    43.1613.120
    53.1373.020
    63.1493.120
    73.1743.300
    83.1583.210
    93.1243.150
    Table 1. Measurement of the welding depth
    Lü Sihang, Hongchang Ding, Yang Xiang, Yongkun Liu. Surface Welding Defect Detection Based on Michelson Interferometer[J]. Laser & Optoelectronics Progress, 2021, 58(19): 1912005
    Download Citation