• Acta Optica Sinica
  • Vol. 41, Issue 13, 1306015 (2021)
Jiahao Guo1、*, Quanbin Huang1, Siping Lian1, Dezhi Liang1、**, Yongqin Yu1、***, Chenlin Du1, and Shuangchen Ruan1
Author Affiliations
  • 1[in Chinese]
  • 13Sino-German College of Intelligent Manufacturing, Shenzhen Technology University, Shenzhen, Guangdong 518060, China
  • show less
    DOI: 10.3788/AOS202141.1306015 Cite this Article Set citation alerts
    Jiahao Guo, Quanbin Huang, Siping Lian, Dezhi Liang, Yongqin Yu, Chenlin Du, Shuangchen Ruan. Probe-Type Pressure Sensor Based on Thin-Walled Grapefruit Microstructured Fiber[J]. Acta Optica Sinica, 2021, 41(13): 1306015 Copy Citation Text show less

    Abstract

    The thin-walled grapefruit microstructured fiber and single-mode fiber are welded by fiber fusion technology to make a probe-type pressure sensor. The open air hole at one end of the microstructure fiber can communicate with the external pressure to realize the pressure response. The pressure sensitivity of 0.70 nm/MPa is obtained and the pressure response has good linearity. Through the comparison between the finite element simulation and experimental result, it is found that the microstructured fiber sensor has the interference of LP01 and LP11 modes, and it is proved that the sensor has good stability and repeatability.
    Jiahao Guo, Quanbin Huang, Siping Lian, Dezhi Liang, Yongqin Yu, Chenlin Du, Shuangchen Ruan. Probe-Type Pressure Sensor Based on Thin-Walled Grapefruit Microstructured Fiber[J]. Acta Optica Sinica, 2021, 41(13): 1306015
    Download Citation