[1] Cheng J Q. Principles of Astronomical Telescope Design[M]. Beijing: China Science & Technology Press, 2003. (in Chinese)

[2] Carl Nissly, Byoung-Joon Seo, Mitchell Troy, et al. High fidelity optical modeling for the TMT[C]//SPIE, 2011, 8336: 83360B.

[3] Carl Nissly, Byoung-Joon Seo, Mitchell Troy, et al. High-resolution optical modeling of the Thirty Meter Telescope for systematic performance trades[C]//SPIE, 2008, 7017: 70170U.

[4] Shao Liang, Yang Fei, Wang Fuguo, et al. Design and optimization of supporting system for 1.2 m lightweight SiC primary mirror[J]. Chinese Optics, 2012, 5(3): 229-234. (in Chinese)

[5] Wang Fuguo, Yang Fei. Zhao Hongchao, et al. Progress in TMT M3 system[J]. Chinese Optics, 2013, 10(6): 643-651. (in Chinese)

[6] Wu Xiaoxia, Wang Minghao, Ming Ming, et al. Calibration of thermal distortion for large aperture SiC lightweight mirror[J]. Opt Precision Engineering, 2012, 20(6): 1243-1249. (in Chinese)

[7] Lin Xudong, Xue Chen, Liu Xinyue. Current status and research development of wave front correctors for adaptive telescope[J]. Chinese Optics, 2012, 5(6): 337-351. (in Chinese)

[8] Zhao Hongchao, Zhang Jingxu, Yang Fei, et al. Preloading eight-van spider for supporting structure of secondary mirror[J]. Opt Precision Engineering, 2013, 21(5): 1199-1204. (in Chinese)

[9] Wolfgang Dierking. RMS slope of exponentially correlated surface roughnessfor radar applications[J]. IEEE Transctions on Geoscience and Remote Sensing, 2000, 38(3): 1451-1454.

[10] Ross Zhelem. Specification of optical surface accuracy using the structure function[C]//SPIE, 2011, 8083: 808310-1-808310-10.

[11] Wang Xu. Fabrication of SiC mirror in full aperture with optimized fixed abrasive polishing pad[J]. Opt Precision Engineering, 2013, 21(2): 267-273. (in Chinese)

[12] Wang Qingfeng, Cheng Dewen, Wang Yongtian. Description of free-form optical curved surface using two_variable orthogonal polynomials[J]. Act Optic Sinica, 2012, 32(9): 092200201-092200210. (in Chinese)

[13] Zhang Wei, Liu Jianfeng, Long Funian, et al. Study on wavefront fitting using Zernike polynomials[J]. Optical Technique, 2005, 31(5): 675-678. (in Chinese)

[14] Bi Yong, Zhai Jia, Wu Jinhu, et al. One method for mirror surface figure treatment in optical instrument[J]. Optical Technique, 2009, 35(1): 10-17. (in Chinese)

[15] Wang Dong, Yang Hongbo, Chen Changzheng. Computer simulation of the optical surface[J]. Computer Simulation, 2007, 24(2): 298-301. (in Chinese)

[16] Lin Xudong, Liu Xinyue, Wang Jianli, et al. Performent of correction capability of 137-element deformable mirror[J]. Optics and Precision Engineering, 2013, 21(2): 267-273. (in Chinese)

[17] Poyneer L A, M van Dam, Véran J P. Experimental verification of the frozen flow atmospheric turbulence assumption with use of astronomical adaptive optics telemetry[J]. J Opt Soc Am A, 2009, 26(4): 833-846.

[18] Shi Xiaoyu, Feng Yong, Chen Ying. A novel predictive controller in the adaptive optics control system based on parallelization method[J]. Act Optic Sinica, 2012, 32(8); 080100501-081001511

[19] Su Yanqin, Zhang Jingxu, Yang Fei, et al. Conceptual design of rotator assembly bearing in TMT tertiary mirror system[J]. Optics and Precision Engineering, 2013, 21(6); 1510-1517.

[20] Zhang Jingxu. Overview of structure of technologies of large aperture ground based telescope[J]. Chinese Optics, 2012, 5(4): 327-336. (in Chinese)

[21] Ni Mingyang, Gong Yan. Design and analysis of kinematic lens positioning structure in lithographic projection objective[J]. Chinese Optics, 2012, 5(5): 476-483. (in Chinese)