[1] J Wu, X Q Wang, W Wang, et al. Microstructure and strength of selectively laser melted AlSi10Mg. Acta Materialia, 117, 311-320(2016).
[2] L Thijs, K Kempen, J-P Kruth, et al. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder. Acta Materialia, 61, 1809-1819(2013).
[3] J Zhang, B Song, Q Wei, et al. A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends. Journal of Materials Science & Technology, 35, 270-284(2019).
[4] D Buchbinder, W Meiners, N Pirch, et al. Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting. Journal of Laser Applications, 26, 012004(2014).
[5] Yongqiang Li, He Zhao, Weihua Zhang, et al. Laser lap welding of aluminum alloy with preheating. Journal of Mechanical Engineering, 45, 251-254(2009).
[6] C Shang, C Wang, C Li, et al. Eliminating the crack of laser 3D printed functionally graded material from TA15 to Inconel718 by base preheating. Optics & Laser Technology, 126, 106100(2020).
[7] Bo He, Chen Wang, Changqin Sun, et al. Effect of substrate preheating on Microstructure and properties of laser-deposited TA15/GH4169 composite structure. Chinese Journal of Lasers, 47, 102002(2020).
[8] Bo He, Chen Wang, Changqin Sun, et al. Study on microstructure and properties of gradient layers of laser deposited ta15/gh4169 gradient composite structure under preheating. Rare Metal, 43, 1-8(2019).
[9] Yongqiang Li, Xihua Zhao, He Zhao, et al. Effect of preheating temperature on weld shaping and microstructure for laser lap welding of aluminum alloy. Journal of Jilin Unive rsity, 1065-1068(2008).
[10] R Casati, Nasab M Hamidi, M Coduri, et al. Effects of platform pre-heating and thermal-treatment strategies on properties of AlSi10Mg alloy processed by selective laser melting. Metals, 8, 954(2018).
[11] Y Liu, C Liu, W Liu, et al. Optimization of parameters in laser powder deposition AlSi10Mg alloy using Taguchi method. Optics & Laser Technology, 111, 470-480(2019).
[12] Fei Lv, Zongjun Tian, Huixin Liang, et al. Microstructures and mechanical properties of AlSi10Mg aluminum alloy fabricated by laser melting deposition. Journal of South China University of Technology, 46, 117-125(2018).
[13] Wenqi Zhang, Haihong Zhu, Zhiheng Hu, et al. Study on the selective laser melting of AlSi10Mg. Acta Metallurgica Sinica, 53, 918-926(2017).
[14] Liqun Li, Jinyu Qu, Xian Wang. Formability and mechanical property of laser metal deposited AlSi10Mg alloy. Surface Technology, 48, 332-337(2019).
[15] Ying Ding, Haiou Yang, Jing Bai, et al. Microstructure and mechanical property of AlSi10Mg Alloy prepared by laser solid forming. China Surface Engineering, 31, 46-54(2018).
[16] J Yuan, L Liang, G Lin, et al. Reutilization of a reflected laser beam as an effective approach for machining metallic materials with low laser absorptivity. Opt Express, 27, 12048-12060(2019).
[17] E Biro, Y Zhou, D C Weckman, et al. The effects of Ni and Au/Ni platings on laser welding of thin sheets. Journal of Laser Applications, 13, 96-104(2001).
[18] Hao Liu, Gang Yu, Xiuli He, et al. Three-dimensional numerical simulation of transient temperature field and coating geometry in powder feeding laser cladding. Chinese Journal of Lasers, 40, 1203007(2013).
[19] Lanyun Qin, Lili Xu, Guang Yang, et al. Correlations of thermal accumulation and melt pool geometry during laser deposition manufacturing of titanium alloy. Rare Metal Materials And Engineering, 46, 2645-2650(2017).
[20] Qiuna Feng, Zongjun Tian, Huixin Liang, et al. Reaserch on the influence of heat accumulation of substrate on the morphology of single tracks of the aluminum alloy laser melting deposition. Applied Laser, 37, 51-58(2017).
[21] A Singh, A Ramakrishnan, G Fabrication of Al-11 Dinda. 2Si components by direct laser metal deposition for automotive applications. Journal of Welding and Joining, 35, 67-73(2017).
[22] S N Grigoriev, T V Tarasova, G O Gvozdeva, et al. Solidification behaviour during laser microcladding of Al–Si alloys. Surface and Coatings Technology, 268, 303-309(2015).
[23] Shi Shihong, Fu Geyan, Wang Anjun, et al. Laser processing fming manufacturing intralight powder feeding process optical powder feeding nozzle, CN: 200610116413.1 [P]. 20161201.
[24] Jianjun Shi, Tuo Shi, Shihong Shi, et al. Process study and optimization of upward cladding by laser inside powder feeding. Infrared and Laser Engineering, 48, 0306005(2019).
[25] Weiwei Jiang, Geyan Fu, Jiping Zhang, et al. Prediction of geometrical shape of coaxial wire feeding cladding in three-beam. Infrared and Laser Engineering, 49, 0305005(2020).
[26] Yanlu Huang, Fuhua Yang, Gongying Liang, et al. Using in-situ technique to determine laser absorptivity of Al-alloys. Chinese Journal of Lasers, 449-453(2003).
[27] Cao Fenguo, Hu Jiangmei, Liu Yuan, et al. Laser Processing[M]. Beijing: Chemical Industry Press, 2015: 4. (in Chinese)
