[1] Liu Y N, Sun R L, Niu W et al. Microstructure and friction and wear resistance of laser cladding composite coating on Ti811 surface[J]. Chinese Journal of Lasers, 46, 0102010(2019).

[2] Wang D S, Tian Z J, Shen L D et al. Research development of nanostructured coatings prepared by laser cladding[J]. Chinese Journal of Lasers, 35, 1698-1709(2008).

[3] Hu D W, Liu Y, Chen H et al. Microstructure and properties of laser cladding Ni-based WC coating on Q960E steel[J]. Chinese Journal of Lasers, 48, 0602120(2021).

[4] Shu L S, Wang J S, Bai H Q et al. Numerical and experimental investigation on laser cladding treatment of wear shaft surface[J]. Journal of Mechanical Engineering, 55, 217-223(2019).

[5] Bai Y, Wang Z H, Zuo J J et al. Fe-based composite coating prepared by laser cladding and its heat and corrosion resistance[J]. Chinese Journal of Lasers, 47, 1002001(2020).

[6] Janicki D. Laser cladding of Inconel 625-based composite coatings reinforced by porous chromium carbide particles[J]. Optics & Laser Technology, 94, 6-14(2017).

[7] Paul C P, Mishra S K, Premsingh C H et al. Studies on laser rapid manufacturing of cross-thin-walled porous structures of Inconel 625[J]. The International Journal of Advanced Manufacturing Technology, 61, 757-770(2012).

[8] Chen W J, Chen H, Li C C et al. Microstructure and fatigue crack growth of EA4T steel in laser cladding remanufacturing[J]. Engineering Failure Analysis, 79, 120-129(2017).

[9] Lee C, Park H, Yoo J et al. Residual stress and crack initiation in laser clad composite layer with Co-based alloy and WC+NiCr[J]. Applied Surface Science, 345, 286-294(2015).

[10] Wang S, Zheng S, Liu W J et al. Optimization of process parameters for laser cladding Fe35A alloy on 45 steel surface[J]. Laser & Optoelectronics Progress, 58, 0914007(2021).

[11] Wang Z, Sun W L, Huang H B et al. Effect of ultrasonic vibrations on quality of laser cladding layer with low overlap rate[J]. Laser & Optoelectronics Progress, 56, 141402(2019).

[12] Fang L, Yin S F, Zhao T C. Multi-objective optimization of P20H die steel laser cladding based on kriging model[J]. Materials Protection, 50, 63-66(2017).

[13] Xu X C, Wen H J, Wang J Y et al. Optimization of laser cladding conditions in response surface method for repairing damaged alloy parts[J]. Chinese Journal of Vacuum Science and Technology, 38, 615-620(2018).

[14] Zhang Z, Kovacevic R. Multiresponse optimization of laser cladding steel + VC using grey relational analysis in the Taguchi method[J]. JOM, 68, 1762-1773(2016).

[15] Wen H J, Meng X L, Xu X C et al. Multi-objective optimization of laser cladding process parameters based on neural network and genetic algorithm[J]. Applied Laser, 39, 734-740(2019).

[16] Ni L B, Liu J C, Wu Y T et al. Optimization of laser cladding process variables based on neural network and particle swarm optimization algorithms[J]. Chinese Journal of Lasers, 38, 0203003(2011).

[17] Wang D S, Yang Y W, Tian Z J et al. Process optimization of thick nanostructured ceramic coating by laser multi-layer cladding based on neural network and genetic algorithm[J]. Chinese Journal of Lasers, 40, 0903001(2013).

[18] Sarker T K, Tang M L. A strength Pareto evolutionary algorithm for live migration of multiple interdependent virtual machines in data centers[M]. Arik S, Huang T W, Lai W K, et al. Neural information processing, 9490, 114-121(2015).

[19] Li J Y, Li H N, Liao Z R et al. Analytical modelling of full single-track profile in wire-fed laser cladding[J]. Journal of Materials Processing Technology, 290, 11678(2021).