[2] J ROBERTSON. Diamond-like amorphous carbon. Mater. Sci. Eng.B, 37, 129-281(2002).
[3] W DAI. Research on the synthesis, structure and properties of metal doped diamond-like carbon nanocomposite films. New Technology & New Process, 7, 128-131(2015).
[4] S ZHANG, Y WU, L ZHU et al. Research progress of metal doped diamond-like carbon films. Aeronautical Manufacturing Technology, 13, 77-82(2017).
[5] S TAMULEVICIUS, S MESKINIS, T TAMULEVICIUS et al. Diamond like carbon nanocomposites with embedded metallic nanoparticles. Rep. Prog. Phys, 81(2018).
[6] J PU, L WANG, Q XUE. Progress in strengthening and toughening carbon-based films. China Surface Engineering, 27, 4-27(2014).
[7] Y WU, J CHEN, H LI et al. Preparation and properties of Ag/DLC nanocomposite films fabricated by unbalanced magnetron sputtering. Appl. Surf.Sci, 284, 165-170(2013).
[8] A MAZARE, A ANGHEL, C SURDU-BOB et al. Silver doped diamond-like carbon antibacterial and corrosion resistance coatings on titanium. Thin Solid Films, 657, 16-23(2018).
[9] M CONSTANTINOU, M PERVOLARAKI, P NIKOLAOU et al. Microstructure and nanomechanical properties of pulsed excimer laser deposited DLC:Ag films: enhanced nanotribological response. Surf. Coat. Technol, 309, 320-330(2017).
[10] N DWIVEDI, S KUMAR, D CAREY J et al. Influence of silver incorporation on the structural and electrical properties of diamond-like carbon thin films. ACS Appl Mater Interfaces, 5, 2725-2732(2013).
[11] Š MEŠKINIS, A VASILIAUSKAS, K ŠLAPIKAS et al. Bias effects on structure and piezoresistive properties of DLC:Ag thin films. Surf. Coat. Technol, 255, 84-89(2014).
[12] E PEINER, A TIBREWALA, R BANDORF et al. Diamond-like carbon for MEMS.. Micromech. Microeng, 17, S83-S90(2007).
[13] C CHUA D H, I MILNE W, D SHEEJA et al. Fabrication of diamond- like amorphous carbon cantilever resonators. J. Vac. Sci. Technol. B, 22, 2680-2684(2004).
[14] S SARSEMBINOV S, Y PRIKHODKO O, P RYAGUZOV A et al. Electronic properties of diamond-like carbon films modified by silver nanoclusters. Phys. Status Solidi C, 7, 805-807(2009).
[15] S ABDOLGHADERI, B ASTINCHAP, A SHAFIEKHANI. Electrical percolation threshold in Ag-DLC nanocomposite films prepared by RF-sputtering and RF-PECVD in acetylene plasma. J Mater Sci: Mater Electron, 27, 6713-6720(2016).
[16] J MUSIL, M LOUDA, Z SOUKUP et al. Relationship between mechanical properties and coefficient of friction of sputtered a-C/Cu composite thin films. Diamond Relat. Mater, 17, 1905-1911(2008).
[17] N MATSUNAMI, Y YAMAMURA, Y ITIKAWA et al. Energy dependence of the ion-induced sputtering yields of monatomic solids. At. Data Nucl.Data Tables, 31, 1-80(1984).
[18] S SMENTKOWSKI V. Trends in sputtering. Prog. Surf. Sci, 64, 1-58(2000).
[19] T TAKI, O TAKAI. XPS structural characterization of hydrogenated amorphous carbon thin films prepared by shielded arc ion plating. Thin Solid Films, 316, 45-50(1998).
[20] W KIM H, E LEE N. Conformal electroless filling of Cu into patterned amorphous carbon layer modified by oxygen plasma and aminosilane treatments. J. Vac. Sci. Technol.B, 28, 715-719(2010).
[21] E WARREN B. X-ray diffraction, New edition. US: Dover Publications(1990).
[22] C FERRARI A, J ROBERTSON. Interpretation of Raman spectra of disordered and amorphous carbon. Phys. Rev.B, 61, 14095-14107(2000).
[23] C FERRARI A, J ROBERTSON. Resonant Raman spectroscopy of disordered,amorphous,diamondlike carbon. Phys. Rev. B, 64(2001).
[24] C CASIRAGHI, C FERRARI A, J ROBERTSON. Raman spectroscopy of hydrogenated amorphous carbon. Phys. Rev. B, 72(2005).
[25] W ZOU C, J WANG H, L FENG et al. Effects of Cr concentrations on the microstructure, hardness, and temperature-dependent tribological properties of Cr-DLC coatings. Appl. Surf. Sci, 286, 137-141(2013).
[26] W DAI, P KE, W MOON M et al. Investigation of the microstructure, mechanical properties and tribological behaviors of Ti- containing diamond-like carbon films fabricated by a hybrid ion beam method. Thin Solid Films, 520, 6057-6063(2012).
[27] J QUAN, J ZHANG, X QI et al. A study on the correlation between the dewetting temperature of Ag film and SERS intensity. Sci. Rep, 7, 14771-14782(2017).
[28] P GUO, L SUN, X LI et al. Structural properties and surface wettability of Cu-containing diamond-like carbon films prepared by a hybrid linear ion beam deposition technique. Thin Solid Films, 584, 289-293(2015).
[29] V SINGH, C JIANG J, I MELETIS E. Cr-diamondlike carbon nanocomposite films: synthesis, characterization and properties. Thin Solid Films, 489, 150-158(2005).
[30] T SONODA, S NAKAO, M IKEYAMA. Deposition of Ti/C nano-composite DLC films by magnetron DC sputtering with dual targets. Vacuum, 84, 666-668(2009).
[31] Y WANG A, R LEE K, P AHN J et al. Structure and mechanical properties of W incorporated diamond-like carbon films prepared by a hybrid ion beam deposition technique. Carbon, 44, 1826-1832(2006).
[32] P GUO, X LI, L SUN et al. Stress reduction mechanism of diamond- like carbon films incorporated with different Cu contents. Thin Solid Films, 640, 45-51(2017).
[33] C DONNET, A ERDEMIR. Tribology of Diamond-like Carbon Films. US: Springer(2008).
[34] C WAN, X ZHANG, J VANACKEN et al. Electro- and magneto- transport properties of amorphous carbon films doped with iron. Diamond Relat. Mater, 20, 26-30(2011).
[35] T TAKENO, H MIKI, T TAKAGI et al. Electrically conductive properties of tungsten-containing diamond-like carbon films. Diamond Relat. Mater, 15, 1902-1905(2006).
[36] F HUANG Q, F YOON S, LI RUS et al. Conduction mechanism in molybdenum-containing diamond-like carbon deposited using electron cyclotron resonance chemical vapor deposition.. Appl. Phys, 88, 4191-4195(2000).