[1] Tao WANG, Jian ZHANG, Na ZHANG et al. Single crystal fibers: diversified functional crystal material. Advanced Fiber Materials, 1, 163-187(2019).
[2] Yue HAO. A new development of wide bandgap and ultra wide bandgap semiconductor devices. Science & Technology Review, 37, 58-61(2019).
[3] Jiaqun LI, Jianfeng YAN, Xin LI et al. A research progress of ultrafast laser micro-nano machining of transparent dielectric materials. Chinese Journal of Lasers, 48, 307-321(2021).
[4] B BOUJELBENE. Influence of the CO2 laser cutting process parameters on the quadratic mean roughness Rq of the low carbon steel. Procedia Manufacturing, 259-264(2018).
[5] A BUTKUTE, L JONUSAUSKAS. 3D manufacturing of glass microstructures using femtosecond laser. Micromachines, 12, 499(2021).
[6] V A AMORIM, J M MAIA, D VIVEIROS et al. Loss mechanisms of optical waveguides inscribed in fused silica by femtosecond laser direct writing. Journal of Lightwave Technology, 37, 2240-2245(2019).
[7] Fubin WANG, Mengzhu LIU, Xiaotang HUO et al. Using femtosecond laser processing quartz glass microchannel sample cell. Microwave and optical Technology Letters, 61, 2225-2233(2019).
[8] Fangteng ZHANG, Zhaogang NIE, Huixiang HUANG et al. Self-assembled three-dimensional periodic micro-nano structures in bulk quartz crystal induced by femtosecond laser pulses. Optics Express, 27, 6442-6450(2019).
[9] V K JAGANNADH, M D MACKENZIE, P PAL et al. Imaging flow cytometry with femtosecond laser-micromachined glass microfluidic channels. IEEE Journal of Selected Topics in Quantum Electronics, 21, 1-6.
[10] Jian DOU, Yu SUN, Muxun XU et al. Process research on micro-machining diamond microgroove by femtosecond laser. Integrated Ferroelectrics, 198, 9-19(2019).
[11] Honggan GU, Ye DAI, Haodong WANG et al. Effect of scanning velocity on femtosecond laser-induced periodic surface structures on HgCdTe crystal. Applied Surface Science, 425, 307-313(2017).
[12] V TANWARODOMNUKUN, J WANG, C Z HUANG et al. An investigation of hybrid laser-waterjet ablation of silicon substrates. International Journal of Machine Tool and Manufacture, 56, 39-49(2012).
[13] M HASHEMZADEH, J POWELL, K T VOISEY. Fiber laser piercing of mild steel-The effects of power intensity, gas type and pressure. Optics and Lasers in Engineering, 55, 143-149(2014).
[14] K M YUVRAJ, M SUVRADIP, K N ASHISH. An investigation on co-axial water-jet assisted fiber laser cutting of metal sheets. Optics and Lasers in Engineering, 77, 203-218(2016).
[15] B KANG, G W KIM, M Y YANG et al. A study on the effect of ultrasonic vibration in nanosecond laser machining. Optics and Lasers in Engineering, 50, 1817-1822(2012).
[16] S H ALAVI, S P HARIMKAR. Ultrasonic vibration-assisted continuous wave laser surface drilling of materials. Manufacturing Letters, 4, 1-5(2015).
[17] Xiaoyan SUN, Jianhang ZHOU, Jian DUAN et al. Experimental research on ultrasound-assisted underwater femtosecond laser drilling. Laser and Particle Beams, 36, 487-493(2018).
