[1] Yamazaki T. Development of a hybrid multi-tasking machine tool: integration of additive manufacturing technology with CNC machining[J]. Procedia CIRP, 42, 81-86(2016).

[2] Reichardt A, Dillon R P, Borgonia J P et al. Development and characterization of Ti-6Al-4V to 304L stainless steel gradient components fabricated with laser deposition additive manufacturing[J]. Materials & Design, 104, 404-413(2016).

[3] Liu Q, Wang Y, Hua X Y et al. A novel approach for developing boron carbide (B4C)/cyanate ester (CE) co-continuous functionally graded materials (FGMs) with eliminated abrupt interfaces[J]. Journal of the European Ceramic Society, 41, 268-273(2021).

[4] Ji X, Sun Z G, Chang L L et al. Microstructure evolution behavior in laser melting deposition of Ti6Al4V/Inconel625 gradient high-temperature resistant coating[J]. Chinese Journal of Lasers, 46, 1102008(2019).

[5] Cissé S, Laffont L, Tanguy B et al. Effect of surface preparation on the corrosion of austenitic stainless steel 304L in high temperature steam and simulated PWR primary water[J]. Corrosion Science, 56, 209-216(2012).

[6] Wang X J, Yan Y L. Microstructure and properties of laser cladding 316L stainless steel coating assisted by magnetic field[J]. Laser & Optoelectronics Progress, 57, 231401(2020).

[7] Chen Y, Zhang K, Huang J et al. Characterization of heat affected zone liquation cracking in laser additive manufacturing of Inconel 718[J]. Materials & Design, 90, 586-594(2016).

[8] Sun W J, Wang S L, Tan G H et al. Effect of material states on microstructure and properties of GH4169 superalloy laser-welded joint[J]. Chinese Journal of Lasers, 47, 1002006(2020).

[9] Carroll B E, Otis R A, Borgonia J P et al. Functionally graded material of 304L stainless steel and Inconel 625 fabricated by directed energy deposition: characterization and thermodynamic modeling[J]. Acta Materialia, 108, 46-54(2016).

[10] Shah K, Haq I U, Khan A et al. Parametric study of development of Inconel-steel functionally graded materials by laser direct metal deposition[J]. Materials & Design, 54, 531-538(2014).

[11] Lin X, Yue T M, Yang H O et al. Laser rapid forming of SS316L/Rene88DT graded material[J]. Materials Science and Engineering A, 391, 325-336(2005).

[12] Lin X, Yue T M. Phase formation and microstructure evolution in laser rapid forming of graded SS316L/Rene88DT alloy[J]. Materials Science and Engineering A, 402, 294-306(2005).

[13] Liang Y J, Liu D, Wang H M. Microstructure and mechanical behavior of commercial purity Ti/Ti-6Al-2Zr-1Mo-1V structurally graded material fabricated by laser additive manufacturing[J]. Scripta Materialia, 74, 80-83(2014).

[14] Ren H S, Liu D, Tang H B et al. Microstructure and mechanical properties of a graded structural material[J]. Materials Science and Engineering A, 611, 362-369(2014).

[15] Järvinen J P, Matilainen V, Li X Y et al. Characterization of effect of support structures in laser additive manufacturing of stainless steel[J]. Physics Procedia, 56, 72-81(2014).

[16] Cao Z Y, Cheng H M. Influence of gap, impurities and component mutation on dynamic character of functionally graded structures[J]. Acta Materiae Compositae Sinica, 24, 136-141(2007).

[17] Shakil M, Ahmad M, Tariq N H et al. Microstructure and hardness studies of electron beam welded Inconel 625 and stainless steel 304L[J]. Vacuum, 110, 121-126(2014).

[18] Nie P L, Ojo O A, Li Z G. Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy[J]. Acta Materialia, 77, 85-95(2014).

[19] Li P F, Gong Y D, Xu Y C et al. Inconel-steel functionally bimetal materials by hybrid directed energy deposition and thermal milling: microstructure and mechanical properties[J]. Archives of Civil and Mechanical Engineering, 19, 820-831(2019).

[20] Nee A Y C[M]. Handbook of manufacturing engineering and technology(2015).