• Acta Optica Sinica
  • Vol. 40, Issue 20, 2006001 (2020)
Ou Deng, Binbin Luo*, Decao Wu, Lang Xie, Mingfu Zhao*, Xue Zou, Shenghui Shi, Enhua Liu, and Shanghai Jiang
Author Affiliations
  • Chongqing Key Laboratory of Optical Fiber Sensor and Photoelectric Detection, Chongqing University of Technology, Chongqing 400054, China
  • show less
    DOI: 10.3788/AOS202040.2006001 Cite this Article Set citation alerts
    Ou Deng, Binbin Luo, Decao Wu, Lang Xie, Mingfu Zhao, Xue Zou, Shenghui Shi, Enhua Liu, Shanghai Jiang. Vibration Sensing Characteristics of Reflection-Type Excessively Tilted Fiber Grating Cantilever[J]. Acta Optica Sinica, 2020, 40(20): 2006001 Copy Citation Text show less
    References

    [1] Zhang D S, Li W, Guo D et al. Real-time monitor system of bridge-cable force based on FBG vibration sensor and its application[J]. Chinese Journal of Sensors and Actuators, 20, 2720-2723(2007).

    [2] Xue J F, Song H, Wang W J. Application of optical fiber grating in health monitoring for aircraft structure[J]. Aeronautical Manufacturing Technology, 55, 45-49(2012).

    [3] Li K. Chan T H T, Yau M H, et al. Experimental verification of the modified spring-mass theory of fiber Bragg grating accelerometers using transverse forces[J]. Applied Optics, 53, 1200-1211(2014).

    [4] Feng D Y, Qiao X G, Yang H Z et al. A fiber Bragg grating accelerometer based on a hybridization of cantilever beam[J]. IEEE Sensors Journal, 15, 1532-1537(2015).

    [5] Parida O P, Thomas J, Nayak J et al. Double-L cantilever-based fiber Bragg grating accelerometer[J]. IEEE Sensors Journal, 19, 11247-11254(2019).

    [6] Guo T, Shao L Y, Tam H Y et al. Tilted fiber grating accelerometer incorporating an abrupt biconical taper for cladding to core recoupling[J]. Optics Express, 17, 20651-20660(2009).

    [7] Rong Q Z, Qiao X G, Guo T et al. Orientation-dependent fiber-optic accelerometer based on grating inscription over fiber cladding[J]. Optics Letters, 39, 6616-6619(2014).

    [8] Cai S S, Nan Y G, Xie W P et al. Fiber-optic accelerometer using tilted grating inscribed in depressed cladding fibers[J]. IEEE Photonics Technology Letters, 29, 2171-2174(2017).

    [9] Zhou K M, Zhang L, Chen X F et al. Optic sensors of high refractive-index responsivity and low thermal cross sensitivity that use fiber Bragg gratings of >80 degrees tilted structures[J]. Optics Letters, 31, 1193-1195(2006).

    [10] Luo B B, Yang W M, Hu X Y et al. Study on vibration sensing performance of an equal strength cantilever beam based on an excessively tilted fiber grating[J]. Applied Optics, 57, 2128-2134(2018).

    [11] Luo B B, Xie L, Wang Y J et al. Performance optimization of excessively tilted fiber grating cantilever beam vibration sensor[J]. Acta Optica Sinica, 39, 0806006(2019).

    [12] Xie L, Luo B B, Zhao M F et al. Orientation-dependent optic-fiber accelerometer based on excessively tilted fiber grating[J]. Optics Letters, 45, 125-128(2020).

    [13] Yan Z J, Wang H S, Wang C L et al. Theoretical and experimental analysis of excessively tilted fiber gratings[J]. Optics Express, 24, 12107-12115(2016).

    [14] Wu X Q, Wang X, Li S L et al. Cantilever fiber-optic accelerometer based on modal interferometer[J]. IEEE Photonics Technology Letters, 27, 1632-1635(2015).

    [15] Hu H Y[M]. Mechanical vibration basics, 110-114(2004).

    Ou Deng, Binbin Luo, Decao Wu, Lang Xie, Mingfu Zhao, Xue Zou, Shenghui Shi, Enhua Liu, Shanghai Jiang. Vibration Sensing Characteristics of Reflection-Type Excessively Tilted Fiber Grating Cantilever[J]. Acta Optica Sinica, 2020, 40(20): 2006001
    Download Citation