• Journal of Inorganic Materials
  • Vol. 35, Issue 10, 1071 (2020)
Yanan WANG1、2、3, Hua LI1、2、3, Zhengkun WANG1, Qingfeng LI1, Chen LIAN1, and Xin HE1
Author Affiliations
  • 1School of Mechanical Engineering, Shandong University, Jinan 250061, China
  • 2Key Laboratory of High-Efficiency and Clean Mechanical Manufacture of Ministry of Education, Shandong University, Jinan 250061, China
  • 3National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, China
  • show less
    DOI: 10.15541/jim20190622 Cite this Article
    Yanan WANG, Hua LI, Zhengkun WANG, Qingfeng LI, Chen LIAN, Xin HE. Progress on Failure Mechanism of Lithium Ion Battery Caused by Diffusion Induced Stress[J]. Journal of Inorganic Materials, 2020, 35(10): 1071 Copy Citation Text show less
    References

    [1] Y WANG Q, S WANG, N ZHANG J et al. Overview of the failure analysis of lithium ion batteries. Energy Storage Sci. Technol., 6, 1008(2017).

    [2] V BELOVA I, E MURCH G. Thermal and diffusion-induced stresses in crystalline solids. J. Appl. Phys., 77, 127-134(1995).

    [3] Y ZHAO, P STEIN, Y BAI et al. A review on modeling of electro- chemo-mechanics in lithium-ion batteries. J. Power Sources, 413, 259-283(2019).

    [4] L LI H, C SONG Y, B LU et al. Effects of stress dependent electrochemical reaction on voltage hysteresis of lithium ion batteries. Appl. Math. Mech-Engl., 39, 1453-1464(2018).

    [5] J LU Y, Q CHE, X SONG et al. Stress self-relaxation arising from diffusion-induced creep in bilayer lithium-ion battery electrode. Scr. Mater., 150, 164-167(2018).

    [6] S CHOI Z, D KRAMER, R MÖNIG et al. Correlation of stress and structural evolution in Li4Ti5O12-based electrodes for lithium ion batteries. J. Power Sources, 240, 245-251(2013).

    [7] L DAI Y, L CAI, E WHITE R. Simulation and analysis of stress in a Li-ion battery with a blended LiMn2O4 and LiNi0.8Co0.15Al0.05O2 cathode. J. Power Sources, 247, 365-376(2014).

    [8] J FU R, M XIAO, Y CHOE S. Modeling, validation and analysis of mechanical stress generation and dimension changes of a pouch type high power Li-ion battery. J. Power Sources, 224, 211-224(2013).

    [9] X MEI W, L DUAN Q, P QIN et al. A three-dimensional electrochemical-mechanical model at the particle level for lithium-ion battery. J. Electrochem. Soc., 166, A3319-A3331(2019).

    [10] Y ZHANG X, S CHEN H, N FANG D. Diffusion-induced stress of electrode particles with spherically isotropic elastic properties in lithium-ion batteries. J. Solid State Electrochem., 20, 2835-2845(2016).

    [11] B CHEN B, Q ZHOU J, M PANG X et al. Fracture damage of nanowire lithium-ion battery electrode affected by diffusion- induced stress and bending during lithiation. RSC Adv., 4, 21072-21078(2014).

    [12] J CHRISTENSEN, J NEWMAN. Stress generation and fracture in lithium insertion materials. J. Solid State Electrochem., 10, 293-319(2006).

    [13] H SUN H, A MANTHIRAM. Impact of microcrack generation and surface degradation on a nickel-rich layered Li[Ni0.9Co0.05Mn0.05]O2 cathode for lithium-ion batteries. Chem. Mater., 29, 8486-8493(2017).

    [14] H LIU X, L ZHONG, S HUANG et al. Size-dependent fracture of silicon nanoparticles during lithiation. ACS Nano, 6, 1522-1531(2012).

    [15] H HU Y, H ZHAO X, G SUO Z. Averting cracks caused by insertion reaction in lithium-ion batteries. J. Mater. Res., 25, 1007-1010(2011).

    [16] M ZHU, J PARK, M SASTRY A. Fracture analysis of the cathode in Li-ion batteries: a simulation study. J. Electrochem. Soc., 159, A492-A498(2012).

    [17] R PURKAYASTHA, R MCMEEKING. Stress due to the intercalation of lithium in cubic-shaped particles: a parameter study. Meccanica, 51, 3081-3096(2016).

    [18] M DELUCA C, K MAUTE, L DUNN M. Effects of electrode particle morphology on stress generation in silicon during lithium insertion. J. Power Sources, 196, 9672-9681(2011).

    [19] B CHEN B, Q ZHOU J, Z LIU. Effects of thermal diffusion in hollow lithium ion battery with spherical particle electrode. J. Nanjing Tech. U.: NAT. SCI. ED., 38, 1-7(2016).

    [20] J LI, H FANG Q, H WU et al. Investigation into diffusion induced plastic deformation behavior in hollow lithium ion battery electrode revealed by analytical model and atomistic simulation. Electrochim. Acta, 178, 597-607(2015).

    [21] J ZHAO K, M PHARR, Q CAI S et al. Large plastic deformation in high-capacity lithium-ion batteries caused by charge and discharge. J. Am. Ceram. Soc., 94, s226-s235(2011).

    [22] Y LI, K ZHANG, B ZHENG et al. Effect of local velocity on diffusion-induced stress in large-deformation electrodes of lithium-ion batteries. J. Power Sources, 319, 168-177(2016).

    [23] S MA Z, X GAO, Y WANG et al. Effects of size and concentration on diffusion-induced stress in lithium-ion batteries. J. Appl. Phys., 120, 025302(2016).

    [24] I RYU, W CHOI J, Y CUI et al. Size-dependent fracture of Si nanowire battery anodes. J. Mech. Phys. Solids, 59, 1717-1730(2011).

    [25] R HARDIN G, Y ZHANG, D FINCHER C et al. Interfacial fracture of nanowire electrodes of lithium-ion batteries. JOM, 69, 1-5(2017).

    [26] W LEE S, W LEE H, I RYU et al. Kinetics and fracture resistance of lithiated silicon nanostructure pairs controlled by their mechanical interaction. Nat. Commun., 6, 7533(2015).

    [27] S CHANG, J MOON, K CHO et al. Multiscale analysis of prelithiated silicon nanowire for Li-ion battery. Comput. Mater. Sci., 98, 99-104(2015).

    [28] Z PENG Y, K ZHANG, L ZHENG B. Stress analysis of a cylindrical composition-gradient electrode of lithium-ion battery in generalized plane strain condition. Acta Phys. Sin., 65, 1-8(2016).

    [29] Z PENG Y, Y LI, L ZHENG B et al. Influence of local velocity on diffusion-induced stress and axial reaction force in a hollow cylindrical electrode of lithium-ion batteries with considering expasion rate of medium. Acta Phys. Sin., 67, 27-35(2018).

    [30] R DESHPANDE, Y QI, T CHENG Y et al. Effects of concentration-dependent elastic modulus on diffusion-induced stresses for battery applications. J. Electrochem. Soc., 157, A967-A971(2010).

    [31] F HAO, D FANG. Diffusion-induced stresses of spherical core- shell electrodes in lithium-ion batteries: the effects of the shell and surface/interface stress. J. Electrochem. Soc., 160, A595-A600(2013).

    [32] N SUN F, L FENG, H BU J et al. Effect of stress on electrochemical performance of hollow carbon-coated silicon snode in lithium ion batteries. Acta Phys. Sin., 68, 42-51(2019).

    [33] F HAO, D FANG. Tailoring diffusion-induced stresses of core-shell nanotube electrodes in lithium-ion batteries. J. Appl. Phys., 113, 013507(2013).

    [34] J ZHAO K, M PHARR, L HARTLE et al. Fracture and debonding in lithium-ion batteries with electrodes of hollow core-shell nanostructures. J. Power Sources, 218, 6-14(2012).

    [35] R DESHPANDE, T CHENG Y, W VERBRUGGE M et al. Diffusion induced stresses and strain energy in a phase-transforming spherical electrode particle. Electrochem. Soc., 158, A718-A724(2011).

    [36] D DROZDOV A. A model for the mechanical response of electrode particles induced by lithium diffusion in Li-ion batteries. Acta Mech., 225, 2987-3005(2014).

    [37] S HUANG, F FAN, J LI et al. Stress generation during lithiation of high-capacity electrode particles in lithium ion batteries. Acta Mater., 61, 4354-4364(2013).

    [38] J LIU Z, Q ZHOU J, B CHEN B et al. Interaction between dislocation mechanics on diffusion induced stress and electrochemical reaction in a spherical lithium ion battery electrode. RSC Adv., 5, 74835-74843(2015).

    [39] F WEI P, Q ZHOU J, J DENG K et al. Effect of dislocation on spherical particle electrode for lithium ion battery. Chin. J. Power Sources, 719-722(2015).

    [40] W ZHU J, Q ZHOU J, B CHEN B et al. Dislocation effect on diffusion-induced stress for lithiation in hollow spherical electrode. J. Solid State Electrochem., 20, 37-46(2015).

    [41] J LI, H FANG Q, F LIU et al. Analytical modeling of dislocation effect on diffusion induced stress in a cylindrical lithium ion battery electrode. J. Power Sources, 272, 121-127(2014).

    [42] J ZHAO K, M PHARR, J VLASSAK J et al. Fracture of electrodes in lithium-ion batteries caused by fast charging. J. Appl. Phys., 108, 073517(2010).

    [43] B LU, C SONG Y, Q ZHANG J. Selection of charge methods for lithium ion batteries by considering diffusion induced stress and charge time. J. Power Sources, 320, 104-110(2016).

    [44] F ZHAO Y, B LÜ. Stress evolution induced by charging shut-down in lithium-ion batteries. J. Mech. Strength, 40, 77-82(2018).

    [45] S KIM, S HUANG H Y. Mechanical stresses at the cathode- electrolyte interface in lithium-ion batteries. J. Mater. Res., 31, 3506-3512(2016).

    [46] L JI, S GUO Z. Analytical modeling and simulation of porous electrodes: Li-ion distribution and diffusion-induced stress. Acta Mech. Sin., 34, 187-198(2018).

    [47] L JI, S GUO Z, J WU Y. Computational and experimental observation of Li-ion concentration distribution and diffusion-induced stress in porous battery electrodes. Energy Technol-Ger., 5, 1702-1711(2017).

    [48] J DIMITRIJEVIC B, E AIFANTIS K, K HACKL. The influence of particle size and spacing on the fragmentation of nanocomposite anodes for Li batteries. J. Power Sources, 206, 343-348(2012).

    [49] R XU, J ZHAO K. Mechanical interactions regulated kinetics and morphology of composite electrodes in Li-ion batteries. Extreme Mech. Lett., 8, 13-21(2016).

    [50] J MAI W, M YANG, S SOGHRATI. A particle-resolved 3D finite element model to study the effect of cathode microstructure on the behavior of lithium ion batteries. Electrochim. Acta, 294, 192-209(2019).

    [51] S RENGANATHAN, G SIKHA, S SANTHANAGOPALAN et al. Theoretical analysis of stresses in a lithium ion cell. J. Electrochem. Soc., 157, A155-A163(2010).

    [52] K RAHANI E, B SHENOY V. Role of plastic deformation of binder on stress evolution during charging and discharging in lithium- ion battery negative electrodes. J. Electrochem. Soc., 160, A1153-A1162(2013).

    [53] H MENDOZA, A ROBERTS S, E BRUNINI V et al. Mechanical and electrochemical response of a LiCoO2 cathode using reconstructed microstructures. Electrochim. Acta, 190, 1-15(2016).

    [54] M WU L, H XIAO X, H WEN Y et al. Three-dimensional finite element study on stress generation in synchrotron X-ray tomography reconstructed nickel-manganese-cobalt based half cell. J. Power Sources, 336, 8-18(2016).

    [55] R QI H, L FENG, B WANG S et al. Stress relaxation through electrochemical diffusion in electrodes. Scientia Sinica (Physica, Mechanica & Astronomica), 46, 1-15(2016).

    [56] M LIU. Finite element analysis of lithium insertion-induced expansion of a silicon thin film on a rigid substrate under potentiostatic operation. J. Power Sources, 275, 760-768(2015).

    [57] F GAO Y, M ZHOU. Coupled mechano-diffusional driving forces for fracture in electrode materials. J. Power Sources, 230, 176-193(2013).

    [58] B CHEN B, Q ZHOU J, W ZHU J et al. Diffusion induced stress and the distribution of dislocations in a nanostructured thin film electrode during lithiation. RSC Adv., 4, 64216-64224(2014).

    [59] B WU, W LU. A battery model that fully couples mechanics and electrochemistry at both particle and electrode levels by incorporation of particle interaction. J. Power Sources, 360, 360-372(2017).

    [60] Q ZHANG J, B LÜ, C SONG Y. A review of fracture in lithium- ion battery electrodes. Chin. Quart. Mech., 38, 18-37(2017).

    [61] L JI, S GUO Z, Y DU S et al. Stress induced by diffusion, curvature, and reversible electrochemical reaction in bilayer lithium-ion battery electrode plates. Int. J. Mech. Sci., 134, 599-609(2017).

    [62] X SONG, J LU Y, L SHI M et al. Effects of plastic deformation in current collector on lithium diffusion and stress in bilayer lithium- ion battery electrode. Acta Phys. Sin., 67, 1-9(2018).

    [63] C SONG Y, Z LI Z, Q ZHANG J. Reducing diffusion induced stress in planar electrodes by plastic shakedown and cyclic plasticity of current collector. J. Power Sources, 263, 22-28(2014).

    [64] M LIU, H GAO C, Q YANG F. Analysis of diffusion-induced delamination of an elastic-perfectly plastic film on a deformable substrate under potentiostatic operation. Modell. Simul. Mater. Sci. Eng., 25, 065019(2017).

    [65] Y LIU D, Q CHEN W, D SHEN X. Diffusion-induced stresses in an imperfect bilayer electrode of coin-shaped lithium-ion batteries. Eur. J. Mech. A-Solid, 55, 167-180(2016).

    [66] F HAO, N FANG D. Reducing diffusion-induced stresses of electrode- collector bilayer in lithium-ion battery by pre-strain. J. Power Sources, 242, 415-420(2013).

    [67] C SONG Y, Z LI Z, K SOH A et al. Diffusion of lithium ions and diffusion-induced stresses in a phase separating electrode under galvanostatic and potentiostatic operations: phase field simulations. Mech. Mater., 91, 363-371(2015).

    [68] Y LI, J ZHANG, K ZHANG et al. A defect-based viscoplastic model for large-deformed thin film electrode of lithium-ion battery. Int. J. Plast., 115, 293-306(2019).

    [69] L HE Y, J HU H, C SONG Y et al. Effects of concentration- dependent elastic modulus on the diffusion of lithium ions and diffusion induced stress in layered battery electrodes. J. Power Sources, 248, 517-523(2014).

    [70] Y LIU D, Q CHEN W, D SHEN X. Diffusion-induced stresses in graphene-based composite bilayer electrode of lithium-ion battery. Compos. Struct., 165, 91-98(2017).

    [71] Y ZHANG X, F HAO, S CHEN H et al. Diffusion-induced stress and delamination of layered electrode plates with composition- gradient. Mech. Mater., 91, 351-362(2015).

    [72] B LU, C SONG Y, S GUO Z et al. Modeling of progressive delamination in a thin film driven by diffusion-induced stresses. Int. J. Solids Struct., 50, 2495-2507(2013).

    [73] S PAL, S DAMLE S, N KUMTA P et al. Modeling of lithium segregation induced delamination of a-Si thin film anode in Li-ion batteries. Comput. Mater. Sci., 79, 877-887(2013).

    [74] H HAFTBARADARAN, C XIAO X, W VERBRUGGE M et al. Method to deduce the critical size for interfacial delamination of patterned electrode structures and application to lithiation of thin-film silicon islands. J. Power Sources, 206, 357-366(2012).

    [75] L YANG, S CHEN H, L SONG W et al. In situ optical observations and simulations on defect induced failure of silicon island anodes. J. Power Sources, 405, 101-105(2018).

    [76] D CHEN, D KRAMER, R MÖNIG. Chemomechanical fatigue of LiMn1.95Al0.05O4 electrodes for lithium-ion batteries. Electrochim. Acta, 259, 939-948(2018).

    [77] R XU, Y YANG, F YIN et al. Heterogeneous damage in Li-ion batteries: experimental analysis and theoretical modeling. J. Mech. Phys. Solids, 129, 160-183(2019).

    [78] T YIM, J CHOI S, N JO Y et al. Effect of binder properties on electrochemical performance for silicon-graphite anode: method and application of binder screening. Electrochim. Acta, 136, 112-120(2014).

    [79] L LI C, Q SUN, Y JIANG J et al. Electrochemistry and morphology evolution of carbon micro-net films for rechargeable lithium ion batteries. J. Phys. Chem. C, 112, 13782-13788(2008).

    [80] C LI J, K DOZIER A, C LI Y et al. Crack pattern formation in thin film lithium-ion battery electrodes. J. Electrochem. Soc., 158, A689-A694(2011).

    [81] Z ZHANG J, J ZHANG, D WANG et al. Stress evolution in SiO electrodes for lithium-ion batteries during electrochemical cycling. Mater. Lett., 190, 79-82(2017).

    [82] F QU, L LI C, M WANG Z et al. Eutectic nano-droplet template injection into bulk silicon to construct porous frameworks with concomitant conformal coating as anodes for Li-ion batteries. Sci. Rep., 5, 10381(2015).

    [83] F QU, L LI C, M WANG Z et al. Metal-induced crystallization of highly corrugated silicon thick films as potential anodes for Li-ion batteries. ACS Appl. Mater. Interfaces, 6, 8782-8788(2014).

    [84] A ZHANG Z, T ZENG, Q LAI Y et al. A comparative study of different binders and their effects on electrochemical properties of LiMn2O4 cathode in lithium ion batteries. J. Power Sources, 247, 1-8(2014).

    [85] A SETHURAMAN V, V WINKLE N, P ABRAHAM D et al. Real-time stress measurements in lithium-ion battery negative- electrodes. J. Power Sources, 206, 334-342(2012).

    [86] M PHARR, S CHOI Y, W LEE D et al. Measurements of stress and fracture in germanium electrodes of lithium-ion batteries during electrochemical lithiation and delithiation. J. Power Sources, 304, 164-169(2016).

    [87] B SUTHAR, C NORTHROP P W, D RIFE et al. Effect of porosity, thickness and tortuosity on capacity fade of anode. J. Electrochem. Soc., 162, A1708-A1717(2015).

    [88] G YANG X, C BAUER, Y WANG C. Sinusoidal current and stress evolutions in lithium-ion batteries. J. Power Sources, 327, 414-422(2016).

    [89] W WU, R XIAO X, M WANG et al. A microstructural resolved model for the stress analysis of lithium-ion batteries. J. Electrochem. Soc., 161, A803-A813(2014).

    [90] B RIEGER, V ERHARD S, S KOSCH et al. Multi-dimensional modeling of the influence of cell design on temperature, displacement and stress inhomogeneity in large-format lithium-ion cells. J. Electrochem. Soc., 163, A3099-A3110(2016).

    [91] B RIEGER, F SCHUSTER S, V ERHARD S et al. Multi-directional laser scanning as innovative method to detect local cell damage during fast charging of lithium-ion cells. J. Energy Storage, 8, 1-5(2016).

    [92] J ZHANG L, Z CHENG H, J MENG D. Experiment study on ETSS coupling mechanism and identification of key parameter for lithium-ion batteries. J. Xi'an Jiaotong Univ., 51, 142-148(2017).

    [93] C YU C, F DAI H. The stress measurement and analysis of the lithium-ion battery. Mechatronics, 21, 14-17+32(2015).

    [94] D SAUERTEIG, N HANSELMANN, A ARZBERGER et al. Electrochemical-mechanical coupled modeling and parameterization of swelling and ionic transport in lithium-ion batteries. J. Power Sources, 378, 235-247(2018).

    [95] A BARAI, R TANGIRALA, K UDDIN et al. The effect of external compressive loads on the cycle lifetime of lithium-ion pouch cells. J. Energy Storage, 13, 211-219(2017).

    [96] J CANNARELLA, B ARNOLD C. Stress evolution and capacity fade in constrained lithium-ion pouch cells. J. Power Sources, 245, 745-751(2014).

    [97] M WÜNSCH, J KAUFMAN, U SAUER D. Investigation of the influence of different bracing of automotive pouch cells on cyclic lifetime and impedance spectra. J. Energy Storage, 21, 149-155(2019).

    [98] H LI R, S REN D, X GUO D et al. Volume deformation of large-format lithium ion batteries under different degradation paths. J. Electrochem. Soc., 166, A4106-A4114(2019).

    [99] S MUSSA A, M KLETT, G LINDBERGH et al. Effects of external pressure on the performance and ageing of single-layer lithium- ion pouch cells. J. Power Sources, 385, 18-26(2018).

    [100] J ZHANG, X HAN, J HU C et al. An optimization of the pressing force applied onto the module structure of soft-package lithium-ion battery. Automot. Eng., 38, 669-673+715(2016).

    [101] A PFRANG, A KERSYS, A KRISTON et al. Long-term cycling induced jelly roll deformation in commercial 18650 cells. J. Power Sources, 392, 168-175(2018).

    [102] F SCHUSTER S, T BACH, E FLEDER et al. Nonlinear aging characteristics of lithium-ion cells under different operational conditions. J. Energy Storage, 1, 44-53(2015).

    [103] C BACH T, F SCHUSTER S, E FLEDER et al. Nonlinear aging of cylindrical lithium-ion cells linked to heterogeneous compression. J. Energy Storage, 5, 212-223(2016).

    Yanan WANG, Hua LI, Zhengkun WANG, Qingfeng LI, Chen LIAN, Xin HE. Progress on Failure Mechanism of Lithium Ion Battery Caused by Diffusion Induced Stress[J]. Journal of Inorganic Materials, 2020, 35(10): 1071
    Download Citation