• Infrared and Laser Engineering
  • Vol. 44, Issue 8, 2309 (2015)
Lv You1、2, Yang Bo3, Wei Zhonghui1, He Xin1, Chang Songtao1、2, and Sun Zhiyuan1
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • show less
    DOI: Cite this Article
    Lv You, Yang Bo, Wei Zhonghui, He Xin, Chang Songtao, Sun Zhiyuan. Middle infrared colorimetric temperature measurement method considered influence of atmosphere and ambient[J]. Infrared and Laser Engineering, 2015, 44(8): 2309 Copy Citation Text show less
    References

    [1] Feng Chi, Zhang Chongguan, Wang Zhaofeng, et al. The wavelength selection of colorimetric temperature measurement [J]. Applied Science and Technology, 2013, 40(3): 45-49.

    [2] Shahla Keyvan,Rodney Rossow, Carlos Romero. Blackbody-based calibration for temperature calculations in the visible and near-IR spectral ranges using a spectrometer[J]. FUEL,2006, 85: 796-802.

    [3] Li Jun, Liu Meidong, Zen Yike, et al. Research on non-contact infrared temperature measurement [J]. Piezoelectrics & Acousto Optics, 2001, 23(3): 202-205.

    [4] Shi Deheng,Dai Qirun, Chen Yuke, et al. Optimal design of a practical dual-wavelength high-precision fiber-optic colorimeter [J]. Chinese Journal of Scientific Instrument, 2005, 26(12): 1238-1243.

    [5] Si Yang. Research of dual-wavelength temperature measurement method based on color image sensor[D]. Xi′an: North University of China, 2013. (in Chinese)

    [6] Wu Haibin, Wang Peng, Zhou Houwei, et al. Influence of furnace environment radiation on colorimetry temperature measurement [J]. Chinese Journal of Quantum Electronics, 2012, 29(2): 224-229. (in Chinese)

    [7] Sun Yuan, Peng Xiaoqi, Tang Ying. Revised method of temperature measurements using two-color thermometry based on CCD image sensor [J]. Chinese Journal of Scientific Instrument, 2008, 29(1): 49-54.

    [8] Zhu Jianhua. Transient high-temperature measurement based on colorimetric temperature measurement technology for high-energy damage blast field [D]. Xi′an: North University of China, 2011.

    [9] Carlos Romero, Xianchang Li, Shahla Keyvan. Spectrometer-based combustion monitoring for flame stoichiometry and temperature control [J]. Applied Thermal Engineering, 2005, 25: 659-676.

    [10] Feng Wenjing. Research on intermediate infrared colorimetric pyrometry system[D]. Harbin: Harbin Institute of Technology, 2013. (in Chinese)

    [11] Cao Lihua. Correction-based dual-waveband color comparison thermometric method [J]. Chinese Journal of Scientific Instrument, 2012, 33(8): 1882-1888. (in Chinese)

    [12] Xing Jichuan, Liu Guangrong, Jin Weiqi, et al. Dual waveband colorimetric temperature measurement method and analysis [J]. Infrared Technology, 2013, 23(1): 71-75. (in Chinese)

    [13] Ren Y, Zhou X M. Survey of dual waveband colorimetric temperature measurement technology[C]//2014 26th Chinese Control and Decision Conference(CCDC), 2014: 5177-5181.

    [14] Li Yunhong,Ma Rong, Zhang Heng, et al. Dual waveband colori-metric temperature accurate measurement tecnhology [J]. Infrared and Laser Engineering, 2015, 44(1): 27-35. (in Chinese)

    [15] Sun Zhiyuan, Chang Songtao, Zhu Wei. Radiation calibration method for infrared system with large aperture and broad dynamic range[J]. Acta Opticsa Sinica, 2013, 23(1): 0712006-1-0712006-7. (in Chinese)

    [16] Luo Maojie, Zhou Jinmei, Fu Jingneng, et al. Integration time as variable for radiometric calibration of infrared system [J]. Infrared and Laser Engineering, 2013, 42(1): 36-40. (in Chinese)

    [17] Han Qijin, Zhang Xuewen, Qiao Zhiyuan, et al. Wide dynamic radiometric calibration of GF-1 PMS sensors using multi-test sites[J]. Infrared and Laser Engineering, 2015, 44(1): 127-133. (in Chinese)

    [18] Sun Zhiyuan, Chang Songtao, Zhu Wei, et al. Radiation calibration of infrared system by amendment of inner and outer calibrations [J]. Optics and Precision Engineering, 2015, 23(2): 356-362. (in Chinese)

    Lv You, Yang Bo, Wei Zhonghui, He Xin, Chang Songtao, Sun Zhiyuan. Middle infrared colorimetric temperature measurement method considered influence of atmosphere and ambient[J]. Infrared and Laser Engineering, 2015, 44(8): 2309
    Download Citation