Contents
2015
Volume: 44 Issue 8
49 Article(s)

Export citation format
[in Chinese]
Design of laser triangulation system based on synchronized scanners with LIDAR
Fei Kai, Zhang Lu, Zhu Feihu, Zhang Xu, and Tu Dawei
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2358 (2015)
Error analysis of space analytic geometry method for celestial position and orientation determination
Wang Haojing, Wang Jianli, Wu Liang, Yang Qingyun, and Wang Minghao
In order to determine the influence of each error source on position and orientation determination error for three-field position and orientation device, the error analysis model of system was established. Firstly, the principle of three-field position and orientation device using space analytic geometry method was pro
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2364 (2015)
Impact of dark current on SWIR polarimetry accuracy
Hu Yadong, Hu Qiaoyun, Sun Bin, Wang Yi, and Hong Jin
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2375 (2015)
Thermal effect model analysis and dynamic error compensation of industrial robot
Li Rui, and Zhao Yang
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2382 (2015)
High-speed focusing technique for lithography based on line scan CCD
Chen Changlong, Di Chengliang, Tang Xiaoping, and Hu song
With the improvement of lithograph resolution, the depth of focus (DOF) of lithographic projection objective is decreasing. In order to take full advantages of the restricted DOF, focusing is commonly used to adjust the wafer onto the ideal focal plane. As the key point of focusing, research on focus detection becomes
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2389 (2015)
Application of improved particle-swarm-optimization in stabilized platform based on multiple reference frame model
Fan Xinming, Cao Jianzhong, Yang Hongtao, Wang Huawei, Yang Lei, Liao Jiawen, Wang Hua, and Lei Yangjie
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2395 (2015)
Calibration method of on-orbit attitude systematic error for space-borne laser altimeter of earth observation
Ma Yue, Yang Fanlin, Yi Hong, and Li Song
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2401 (2015)
[in Chinese]
Characteristics analysis and simulation of Fresnel concentrator in concentrated photovoltaic system
Zhang Mingjun, Gao Wenying, Niu Quanyun, and Yuan Xingqi
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2411 (2015)
Thermal performance testing for high power light-emitting diode based on voltage-current characteristics with pulse injection
Wang Xin, Xu Yingjie, Fan Xianguang, Wang Haitao, Wu Jinglin, and Zuo Yong
Thermal performance is one of the main factors which affect the optical and electrical performance of high power LED. The thermal performance testing system for high power LEDs based on voltage-current characteristics with pulse injection was designed in this paper, which can test the relationship between the operating
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2417 (2015)
Research of UWB multifunctional modulation based on phase modulator
Ma Xiaolu, Huang Shijie, Zhang Yi, Zhu Tianyang, Cao Fengjiao, Zhao Meng, and Li Peili
A UWB multi-functional modulator scheme based on cascade of phase modulation (PM) and filters was presented. This scheme was simple and could switch a variety of UWB modulation format flexibility by simple pre-coding to realize on-off keying(OOK), pulse bi-polar modulation(PBM), and pulse shape modulation(PSM). The gen
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2423 (2015)
Impact of dipole photoconductive antenna structure on the THz radiation characteristics
Xia Zuxue, Liu Falin, Chen Junxue, Shang Liping, Deng Hu, and Xiong Liang
Influence of the geometrical parameters of GaAs dipole photoconductive antenna(PCA) on the PCA′s radiation characteristics was studied. At first, the analytical solution of PCA′s current obtained by the Drude-Lorentz(DL) model was obtained as excitation, and the numerical finite-difference time-domain(FDTD) simulation
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2429 (2015)
Structural design of 4 m telescope mount base based on topology optimization method
Fu Shixin, Zhou Chao, Cao Yuyan, Fan Lei, and Han Xida
To meet the requirement for high stiffness and lightweight, topology optimization method with constraints of static displacements and first resonance frequency was studied in 4 m telescope mount base design. Firstly, mathematical model of topology optimization was built subjected to minimum compliance, with pseudo dens
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2441 (2015)
Effect of coupling strength on the phase locking performance of fiber lasers coupled with a common ring cavity
Lei Bing, Cao Jianqiu, Liu Wei, Hu Haojun, and Feng Ying
Passive phase locking of two fiber lasers which were coupled by a common ring cavity had been demonstrated, and the effect of coupling strength between them on the phase locking performance had been investigated in detail. The ring coupled cavity was chiefly composed of two 2×2 fiber couplers, which provided a com
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2448 (2015)
[in Chinese]
Design of off-axis optical antenna for space optical communications
Sun Quanshe, Zhao Facai, Chen Kunfeng, and Han Zhong
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2501 (2015)
Performance evaluation of full-duplex free space laser communication system based on modulating retro-reflector
Zhang Peng, Wang Tianshu, Yang Guowei, Jia Qingsong, Ma Wanzhuo, Zhang Lizhong, Tong Shoufeng, and Jiang Huilin
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2506 (2015)
Spatially and spectrally resolved fiber mode measurement method
Hu Lili, Feng Guoying, and Dong Zheliang
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2517 (2015)
Influence of channel correlation on the signal scintillation with spatial diversity receiver
Shen Hong, and Fan Chengyu
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2523 (2015)
Blind equalization algorithm of wireless optical communication using subcarrier modulation based on subspace
Chen Dan, Ke Xizheng, and Qiao Wei
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2528 (2015)
[in Chinese]
Laser induced damage characteristics of nodules in thin-film polarizers
Tuniyazi Abudusalamu, Cheng Xinbin, Bao Ganghua, Jiao Hongfei, and Wang Zhanshan
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2461 (2015)
Optical design of micro DLP projection based on novel light pipe
Wang Cheng, Hao Wenliang, Tian Liwei, Wang Ruofei, and Zhu Xiangbing
Traditional DLP technologies can not collect and utilize the light which is reflected by the micromirrors of DMD in the "OFF" state. Aiming at this defect, one design scheme of the micro DLP projection system based on a novel light pipe was presented. This system included LEDs, light pipe, color wheel, the co
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2472 (2015)
Analysis of attitude change impact on aerial push-broom imaging
Xian Guang, and Yan Changxiang
The shift generated from aircraft attitude change was one of the main factors affecting the optical imaging quality in aerial push-broom imaging,which could be compensated by stable platform. In this article,based on an particularly airborne imaging spectrometer system,firstly the precise image motion velocity model wa
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2478 (2015)
Line-of-sight stabilization and modeling analysis of bias shafting mirror platform
Song Jiangpeng, Sun Guangli, Zhou Di, and Li Dan
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2484 (2015)
Design and fabrication of diamond/V2O5 films in continuous laser protection
Zuo Yangping, Lu Wenzhuang, Zhang Shengbin, Yu Yaping, Feng Sen, and Zuo Dunwen
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2491 (2015)
[in Chinese]
Analysis of the effects of fill factor on image quality of micro-scanning system
Shen Tongsheng, Shi Haoran, Lou Shuli, and Li Zhaolong
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2292 (2015)
Spectroscopic characteristics of GaAs/Al0.3Ga0.7As quantum well infrared photodetectors
Hu Xiaoying, Liu Weiguo, Duan Cunli, Cai Changlong, and Guan Xiao
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2305 (2015)
Middle infrared colorimetric temperature measurement method considered influence of atmosphere and ambient
Lv You, Yang Bo, Wei Zhonghui, He Xin, Chang Songtao, and Sun Zhiyuan
Traditional colorimetric temperature measurement method commonly used in visible and near infrared band, can only get high precisions when measuring near high temperature target, and can′t get high precisions when measuring far low-middle temperature target. Aimed at the limitations of traditional method, infrared colo
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2309 (2015)
Key subjects of UCIR guidance applied on air defence
Yin shengli, Pan Hongtao, Wang Zichen, and Wu Zepeng
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2315 (2015)
Analysis of the influence of infrared temperature measurement based on reflected temperature compensation and incidence temperature compensation
Shi Dongping, Wu Chao, Li Zijun, and Pan Wei
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2321 (2015)
Construction of Malkmus statistical narrow spectral band model parameters database based on HITEMP2010
Chen Shiguo, Chen Lihai, Mo Dongla, Shi Jingcheng, and Mei Fei
In order to make high accuracy predictions of high temperature combustion gases infrared radiation characteristics, the spectral band model parameters such as spectral absorption coefficient or spectral transmittance which changed with gases temperature and wave number must be invoked. A new construction method of spec
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2327 (2015)
Efficiency of aero-engine infrared radiation computation by using BMC method
Huang Wei, and Ji Honghu
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2334 (2015)
A combined non-uniformity correction algorithm of IR staring imaging system
Nie Ruijie, Li Lijuan, Wang Chaolin, and Xu Yanke
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2339 (2015)
[in Chinese]
Study on thermal effect of LD end-pumped separated amplifier structure
Zhang Deping, Wu Chao, Zhang Rongzhu, and Sun Nianchun
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2250 (2015)
Influence of noise on range error for satellite laser altimeter
Zhou Hui, Li Song, Wang Liangxun, and Zheng Guoxing
Noise is an important factor of affecting range error for satellite laser altimeter with recording waveform. According to the distribution characteristic of received pulse signal and noise, the theoretical expression form about variance of time-centroid for received pulse signal was deduced. Thereby, the impact model o
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2256 (2015)
Stealth technology of optical-electro imaging devices based on focal shift
Zhang Yufa, Sun Xiaoquan, Lei Peng, and Yu Dabin
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2268 (2015)
Study on compound technology of laser shock peening and aluminizing improve the mechanical properties of K417 alloy
Jiao Yang, He Weifeng, Sun Ling, Zhou Liucheng, Nie Xiangfan, Luo Sihai, and Li Jing
Vibration fatigue tests were performed on aluminizing, LSP after aluminizing、aluminizing after LSP K417 alloy specimen respectively. The results showed that, compared with that treated by aluminizing only, the fatigue strength of specimen treated by aluminizing after LSP was improved by 50%and that treated by LSP after
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2274 (2015)
Experimental researches on acousto-optic Q-switched CO2 laser
He Yang, Lu Jun, Chen Fei, Li Dianjun, Zheng Changbin, Xie Jijiang, and Guo Jin
In order to meet the demand of 13.5-nm extreme ultraviolet lithography (EUVL), an acousto-optically Q-switched CO2 laser was developed, which has high repetition rate and high stability. First, the operating principle of the acousto-optic Q-switch was analyzed and the relationship between the voltage of modulated signa
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2280 (2015)
Estimation of far-field divergence of high power TEA CO2 laser
Zhang Kuo, Lu Jun, Yang Guilong, Chen Fei, Li Dianjun, Zheng Changbin, and Guo Jin
Infrared and Laser Engineering
  • Publication Date: Jan. 01, 1900
  • Vol. 44, Issue 8, 2286 (2015)