[1] Kawata S, Sun H B, Tanaka T et al. Finer features for functional microdevices[J]. Nature, 412, 697-698(2001).

[2] Wang R R, Zhang W C, Jin F et al. Fabrication of polyaniline microstructure via two-photon polymerization[J]. Chinese Journal of Lasers, 48, 0202006(2021).

[3] Yang X, Sun H L, Yue D M et al. Research progress of femtosecond laser fabrication of microlens array[J]. Laser & Optoelectronics Progress, 58, 0500005(2021).

[4] Wang W J, Zhou X Y, Liu W J. Machining metal mask plate by femtosecond laser ablation[J]. Science & Technology Information, 148-150(2007).

[5] Wu Y Z, Huang Y H, Yin Q et al. Thick modulated planar film-foam target fabricated by femtosecond laser micromachining[J]. High Power Laser and Particle Beams, 23, 685-688(2011).

[6] Song X Y, Xing J F. 3D printing technology based on two-photon polymerization[J]. CIESC Journal, 66, 3324-3332(2015).

[7] Gissibl T, Thiele S, Herkommer A et al. Two-photon direct laser writing of ultracompact multi-lens objectives[J]. Nature Photonics, 10, 554-560(2016).

[8] Chung T T, Tu Y T, Hsueh Y H et al. Micro-lens array fabrication by two photon polymerization technology[J]. International Journal of Automation and Smart Technology, 3, 131-135(2013).

[9] Wang Z J[M]. Handbook of practical optical technology(2007).

[10] Laikin M[M]. Lens design(2001).

[11] Yu D Y, Tan H Y[M]. Engineering optics(1999).

[12] Toru K[M]. Lens Optics-theory and practical program(1988).

[13] Li L[M]. Modern optical design method(2009).

[14] Zhou E Y, Liu L H, Liu Y et al. Design of high NA flat-field microscope objective for near infrared[J]. Infrared and Laser Engineering, 46, 0718006(2017).

[15] Xiao Q. Optical design of biological zoom microscope objective[J]. Optical Instruments, 29, 78-81(2007).

[16] Liu Z Y, Zhang X T, Wu Q Q. High resolution ultraviolet/visible wide band microscope objective[J]. Journal of Applied Optics, 34, 575-578(2013).

[17] Mao W W[M]. Modern optical lens design: methods and examples(2013).

[18] Yuan X C[M]. Optical design(1988).

[19] Fumio K[M]. Lens design techniques(1978).

[20] Kurvits J A, Jiang M M, Zia R. Comparative analysis of imaging configurations and objectives for Fourier microscopy[J]. Journal of the Optical Society of America A, 32, 2082-2092(2015).

[21] Панов В А, Андреев Л Н[M]. Optical design and calculation of microscope. Bao X C, Transl(1982).

[22] Yu X H. Design of flat-field achromatic objective lens with wide spectrum and large numerical aperture[D](2018).

[24] Xue J L, Gong Y, Li D M. Optical design of the N.A.0.75 plan-apochromatic microscope objective[J]. Chinese Optics, 8, 957-963(2015).

[25] Xu W C. Optical design and imaging performance compensation for the lithographic lens[D](2011).