Xuehui Chen, Xiang Li, Chao Wu, Yao Zhang. Influence of Water Jet Assisted Laser Processing Silicon Carbide[J]. Laser & Optoelectronics Progress, 2019, 56(1): 011405
- Laser & Optoelectronics Progress
- Vol. 56, Issue 1, 011405 (2019)
Fig. 1. Distribution cloud diagrams of (a) pressure and (b) velocity at 30° and 60° jet incidence angles and 22 m·s-1 velocity
Fig. 2. Pressure distribution curves of lateral centerline of wall at (a) 30° and (b) 60° jet incident angles with different water jet velocities
Fig. 3. Schematic of the impact force of water jets impacted on the surface of the material at different angles
Fig. 4. Results of test depth at different speeds for waterless, 30° and 60° jet injection angles (×30)
Fig. 5. Test width results at different speeds for waterless, 30° and 60° jet injection angles (×40)
Fig. 6. Test surface topographies of waterless, 30° and 60° jet injection angles at 17 m·s-1
|
Table 1. Parameters of laser processing
Set citation alerts for the article
Please enter your email address
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20