Pit Morphology Evolution Law of 3A21 Aluminum Alloy Surface in Laser Texturing

Xi Chen; Fei Wang; Qiong Wu; Caixiang Di; Ming Tian; Qingxin Cui

doi:10.3788/LOP56.241404

[1] Bathe R, Sai Krishna V, Nikumb S K et al. Laser surface texturing of gray cast iron for improving tribological behavior[J]. Applied Physics A, 117, 117-123(2014).

[2] Romoli L, Moroni F. Khan M M A. A study on the influence of surface laser texturing on the adhesive strength of bonded joints in aluminium alloys[J]. CIRP Annals, 66, 237-240(2017).

[3] Razi S, Madanipour K, Mollabashi M. Laser surface texturing of 316L stainless steel in air and water: a method for increasing hydrophilicity via direct creation of microstructures[J]. Optics & Laser Technology, 80, 237-246(2016).

[4] Fang H M, Bai S L, Wong C P. Microstructure engineering of graphene towards highly thermal conductive composites[J]. Composites Part A: Applied Science and Manufacturing, 112, 216-238(2018). http://www.sciencedirect.com/science/article/pii/S1359835X18302380

[5] Nandakumar M B, Sudhakar K G, Natu H et al. Experimental investigation of the effect of laser texturing on the used IC engine piston skirt[J]. Materials Today: Proceedings, 5, 2773-2780(2018). http://www.sciencedirect.com/science/article/pii/S2214785318300737

[6] Yao Q T, Sun J, Shen D P et al. Large-scale synthesis of nanostructured nitride layer on Ti plate using mechanical shot peening and low-temperature nitriding[J]. Advanced Engineering Materials, 19, 1700157(2017). http://onlinelibrary.wiley.com/doi/10.1002/adem.201700157/full

[7] Puri Y M, Gohil V. Experimental study of material removal rate in electrical discharge turning of titanium alloy (Ti-6Al-4V)[J]. IOP Conference Series: Materials Science and Engineering, 187, 012036(2017). http://adsabs.harvard.edu/abs/2017MS%26E..187a2036P

[8] Zheng X H, Tan J, Zhang Q et al. Effect of laser surface texturing depth on the adhesion of electroless plated nickel coating on alumina[J]. Surface and Coatings Technology, 311, 151-156(2017).

[9] Li Z Y, Yang M J, Liu W J et al. Investigation on crater morphology by high repetitive rate YAG laser-induced discharge texturing[J]. Surface and Coatings Technology, 200, 4493-4499(2006). http://www.sciencedirect.com/science/article/pii/S0257897205004184

[10] Bonse J, Kirner S V, Griepentrog M et al. Femtosecond laser texturing of surfaces for tribological applications[J]. Materials, 11, 801(2018).

[11] Guo J D, Li Y, Lu H L et al. An effective method of edge deburring for laser surface texturing of Co-Cr-Mo alloy[J]. The International Journal of Advanced Manufacturing Technology, 94, 1491-1503(2018).

[12] Kümmel J, Braun D, Gibmeier J et al. Study on micro texturing of uncoated cemented carbide cutting tools for wear improvement and built-up edge stabilisation[J]. Journal of Materials Processing Technology, 215, 62-70(2015).

[13] Cai S, Chen G Y, Zhou C et al. Research of plasma physical model for single pulsed laser ablation of bronze-bond grinding wheel[J]. Acta Optica Sinica, 37, 0414001(2017).

[14] Li X L, Yue W, Huang F et al. Tribological behaviour of textured titanium under abrasive wear[J]. Surface Engineering, 35, 378-386(2019).

[15] Ye Y X, Jia Z Y, Fu H et al. Study on evalution law of manufacturing micro-convex points on 45# steel surface by pulse-width laser[J]. Laser & Optoelectronics Progress, 53, 031408(2016).

[16] Pardal G, Meco S, Dunn A et al. Laser spot welding of laser textured steel to aluminium[J]. Journal of Materials Processing Technology, 241, 24-35(2017).

[17] Chilamakuri S, Bhushan B. Effect of peak radius on design of W-type donut shaped laser textured surfaces[J]. Wear, 230, 118-123(1999).

[18] Liu Y, Chen D R, Yang W Y. Experimental investigation of laser-texterued on roller with micro-convex topography[J]. Chinese Journal of Mechanical Engineering, 39, 107-110(2003).

[19] Vilhena L M. Sedla ek M, Podgornik B, et al. Surface texturing by pulsed Nd∶YAG laser[J]. Tribology International, 42, 1496-1504(2009).

[20] Fu Y H, Wang H, Yang Y G et al. Experiment research on fiber laser texturing of stainless steel and its friction properties[J]. Surface Technology, 44, 96-101(2015).

[21] Ukar E, Lamikiz A, Martínez S et al. Laser texturing with conventional fiber laser[J]. Procedia Engineering, 132, 663-670(2015). http://www.sciencedirect.com/science/article/pii/S1877705815044562

[22] Hu J, Xu H B. Friction and wear behavior analysis of the stainless steel surface fabricated by laser texturing underwater[J]. Tribology International, 102, 371-377(2016).

[23] Yu Z, Zhang W J, Hu J. Micromachining of titanium alloy implant by picosecond laser surface texturing and alloy biocompatibility[J]. Chinese Journal of Lasers, 44, 0102014(2017).