[1] Yang Yongqiang, Song Changhui, Wang Di. Selective laser melting and its applications on personalized medical parts[J]. Journal of Mechanical Engineering, 2014, 50(21): 140-151.
[2] Wang Anqi, Feng Xiaoming, Yang Zhaopeng, et al. Development and advances of additive manufacturing in medical devices[J]. China Medical Device Information, 2014, 20(8): 1-7, 33.
[4] Tang Huiping, Wang Jian, Lu Shenglu, et al. Research progress in selective electron beam melting[J]. Materials China, 2015, 34(3): 225-235.
[5] Wang Yunda, Yang Yongqiang, Song Changhui, et al. Process optimization and electrochemical behavior of CoCrMo alloy fabricated by selective laser melting based on response surface method[J]. The Chinese Journal of Nonferrous Metals, 2014, 24(10): 2497-2505.
[6] Su X B, Yang Y Q, Yu P, et al. Development of porous medical implant scaffolds via laser additive manufacturing[J]. Transactions of Nonferrous Metals Society of China, 2012, 22: s181-s187.
[7] Zhang Ran, Zhang Ziqun, Song Zhijian. The repair of skull defect applying rapid prototyping based on level set[J]. Chinese Journal of Biomedical Engineering, 2013, 32(3): 373-377.
[8] Song Changhui, Yang Yongqiang, Wang Yunda, et al. Research on process and property of CoCrMo alloy directly manufactured by selective laser melting[J]. Chinese J Lasers, 2014, 41(6): 58-65:
[9] Zhang Guoqing, Yang Yongqiang, Song Changhui, et al. Study on design and properties of porous CoCrMo alloy structure manufactured by selective laser melting[J]. Chinese J Lasers, 2015, 42(11): 1103003.
[10] Zhang Guoqing, Yang Yongqiang, Lin Hui, et al. Study on the tribology performance of CoCrMo alloy parts manufactured by selective laser melting[J]. Chinese J Lasers, 2016, 43(8): 0802013.
[11] Wang Qingliang, Zhang Lei, Dong Jiandong, et al. Investigation on tribological properties of medical grade forged and cast CoCrMo alloys[J]. Journal of Xuzhou Institute of Technology (Natural Sciences Edition), 2010, 25(3): 7-12.
[12] Gong Yuanyuan. Wear resistance of dental cobalt-chromium alloy by heat treatment[D]. Chongqing: Chongqing Medical University, 2008.
[13] Takaichi A, Suyalatu, Nakamoto T, et al. Microstructures and mechanical properties of Co-29Cr-6Mo alloy fabricated by selective laser melting process for dental applications[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2013, 21: 67-76.
[14] Schwindling F S, Seubert M, Rues S, et al. Two-body wear of CoCr fabricated by selective laser melting compared with different dental alloys[J]. Tribology Letters, 2015, 60(2): 1-8.
[15] Chiba A, Kumagai K, Nomura N, et al. Pin-on-disk wear behavior in a like-on-like configuration in a biological environment of high carbon cast and low carbon forged Co-29Cr-6Mo alloys[J]. Acta Materialia, 2007, 55(4): 1309-1318.
[16] Henriques B, Soares D, Silva F S. Microstructure, hardness, corrosion resistance and porcelain shear bond strength comparison between cast and hot pressed CoCrMo alloy for metal-ceramic dental restorations[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2012, 12: 83-92.
[17] Li Feng, Wang Chengtao. Measurement of contact angle of cartilage and artificial joint materials[J]. Lubrication Engineering, 2009, 34(8): 1-5.
[18] Celik A, Bayrak , Alsaran A, et al. Effects of plasma nitriding on mechanical and tribological properties of CoCrMo alloy[J]. Surface and Coatings Technology, 2008, 202(11): 2433-2438.
[19] Lanning B R, Wei R H. High intensity plasma ion nitriding of orthopedic materials: Part II. Microstructural analysis[J]. Surface and Coatings Technology, 2004, 186(1-2): 314-319.
[20] Saldívar-García A J, López H F. Microstructural effects on the wear resistance of wrought and as-cast Co-Cr-Mo-C implant alloys[J]. Journal of Biomedical Materials Research Part A, 2005, 74A(2): 269-274.
[21] Wei R H, Booker T, Rincon C, et al. High-intensity plasma ion nitriding of orthopedic materials: Part I. Tribological study[J]. Surface and Coatings Technology, 2004, 186(1-2): 305-313.
[22] Zhang Shiwen, Lian Yuying. Water reppellence and contact angle measurement[J]. Modern Measurement and Test, 1994(3): 36-41.
[23] Gao Zhan. Study on biotribology characteristics of modified Ti6Al4V alloy/UHMWPE[D]. Nanjing: Nanjing University of Science and Technology, 2006.
