• Chinese Journal of Lasers
  • Vol. 48, Issue 22, 2202003 (2021)
Xiaming Chen1、2, Xiaonan Wang1、*, Qipeng Dong1、2, Zhen Zhu1、2, and Nagaumi Hiromi1、2
Author Affiliations
  • 1School of Iron and Steel, Soochow University, Suzhou, Jiangsu 215021, China
  • 2High-Performance Metal Structural Materials Research Institute, Soochow University, Suzhou, Jiangsu 215021, China
  • show less
    DOI: 10.3788/CJL202148.2202003 Cite this Article Set citation alerts
    Xiaming Chen, Xiaonan Wang, Qipeng Dong, Zhen Zhu, Nagaumi Hiromi. Effect of Filling Material with Different Si Content on Microstructure and Properties of Laser-CMT Aluminum Alloy Joints[J]. Chinese Journal of Lasers, 2021, 48(22): 2202003 Copy Citation Text show less
    References

    [1] Zhai Y F, Huang J, Li M et al. Research on high speed high power CO2 laser welding of 6061-T6 aluminum with filler wire[J]. Chinese Journal of Lasers, 38, 0503001(2011).

    [2] Ji S, Watson D, Fan Z et al. Development of a super ductile diecast Al-Mg-Si alloy[J]. Materials Science and Engineering: A, 556, 824-833(2012).

    [3] Lin S, Deng Y L, Tang J G et al. Microstructures and fatigue behavior of metal-inert-gas-welded joints for extruded Al-Mg-Si alloy[J]. Materials Science and Engineering: A, 745, 63-73(2019).

    [4] Biradar N S, Raman R. Grain refinement in Al-Mg-Si alloy TIG welds using transverse mechanical arc oscillation[J]. Journal of Materials Engineering and Performance, 21, 2495-2502(2012).

    [5] Cao X, Wallace W, Poon C et al. Research and progress in laser welding of wrought aluminum alloys. I. laser welding processes[J]. Materials and Manufacturing Processes, 18, 1-22(2003).

    [6] Yan S H, Chen H, Zhu Z T et al. Hybrid laser-metal inert gas welding of Al-Mg-Si alloy joints: microstructure and mechanical properties[J]. Materials & Design, 61, 160-167(2014).

    [7] Frostevarg J. Comparison of three different arc modes for laser-arc hybrid welding steel[J]. Journal of Laser Applications, 28, 022407(2016).

    [8] Liu Q, Zhang Y X, Zhang N N. Effects of wire feeding speed on properties of CMT welded joints of 6061 aluminum alloy[J]. Hot Working Technology, 45, 222-224(2016).

    [9] Li Z X, Wen P, Zhang S et al. Effects of Nb micro-alloying on microstructure and mechanical properties of A7204P-T4 aluminum alloy joint by fiber laser-CMT hybrid welding[J]. Chinese Journal of Lasers, 47, 0902001(2020).

    [10] Yan S H, Xing B B, Zhou H Y et al. Effect of filling materials on the microstructure and properties of hybrid laser welded Al-Mg-Si alloys joints[J]. Materials Characterization, 144, 205-218(2018).

    [11] Braun R. Laser beam welding of Al-Mg-Si-Cu alloy 6013 sheet using silicon rich aluminium filler powders[J]. Materials Science and Technology, 21, 133-140(2005).

    [12] Braun R. Nd∶YAG laser butt welding of AA6013 using silicon and magnesium containing filler powders[J]. Materials Science and Engineering: A, 426, 250-262(2006).

    [13] Huan P C, Wang X N, Zhang J et al. Effect of wire composition on microstructure and properties of 6063 aluminium alloy hybrid synchronous pulse CMT welded joints[J]. Materials Science and Engineering: A, 790, 139713(2020).

    [14] Easton M A, StJohn D H. Improved prediction of the grain size of aluminum alloys that includes the effect of cooling rate[J]. Materials Science and Engineering: A, 486, 8-13(2008).

    [15] Pourkia N, Emamy M, Farhangi H et al. The effect of Ti and Zr elements and cooling rate on the microstructure and tensile properties of a new developed super high-strength aluminum alloy[J]. Materials Science and Engineering: A, 527, 5318-5325(2010).

    [16] Zhu W Q, Yu M Z, Tang X et al. Effect of Er and Si on thermal conductivity and latent heat of phase transformation of aluminum-based alloy[J]. Acta Metallurgica Sinica, 56, 1485-1494(2020).

    [17] Calcagnotto M, Ponge D, Demir E et al. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD[J]. Materials Science and Engineering: A, 527, 2738-2746(2010).

    [18] Wang S C, Zhu Z, Starink M J. Estimation of dislocation densities in cold rolled Al-Mg-Cu-Mn alloys by combination of yield strength data, EBSD and strength models[J]. Journal of Microscopy, 217, 174-178(2005).

    [19] Starink M J, Wang S C. A model for the yield strength of overaged Al-Zn-Mg-Cu alloys[J]. Acta Materialia, 51, 5131-5150(2003).

    [20] Hansen N. Hall-Petch relation and boundary strengthening[J]. Scripta Materialia, 51, 801-806(2004).

    [21] Myhr O R, Grong Ø, Andersen S J. Modelling of the age hardening behaviour of Al-Mg-Si alloys[J]. Acta Materialia, 49, 65-75(2001).

    [22] Roters F, Raabe D, Gottstein G. Work hardening in heterogeneous alloys: a microstructural approach based on three internal state variables[J]. Acta Materialia, 48, 4181-4189(2000).

    [23] Lan J, Shen X J, Liu J et al. Strengthening mechanisms of 2A14 aluminum alloy with cold deformation prior to artificial aging[J]. Materials Science and Engineering: A, 745, 517-535(2019).

    [24] Wang Z M, Oliveira J P, Zeng Z et al. Laser beam oscillating welding of 5A06 aluminum alloys: microstructure, porosity and mechanical properties[J]. Optics & Laser Technology, 111, 58-65(2019).

    [25] Zhang C, Li G, Gao M et al. Microstructure and process characterization of laser-cold metal transfer hybrid welding of AA6061 aluminum alloy[J]. The International Journal of Advanced Manufacturing Technology, 68, 1253-1260(2013).

    [26] Lei Z L, Li B W, Bi J et al. Influence of the laser thermal effect on the droplet transfer behavior in laser-CMT welding[J]. Optics & Laser Technology, 120, 105728(2019).

    [27] Wen P, Li Z X, Zhang S et al. Investigation on porosity, microstructures and performances of 6A01-T5 aluminum alloy joint by oscillating fiber laser-CMT hybrid welding[J]. Chinese Journal of Lasers, 47, 0802003(2020).

    [28] Li J Z, Liu Y B, Sun Q J et al. Effects of laser beam wobble on weld formation characteristics, microstructure, and strength of aluminum alloy/steel joints[J]. Chinese Journal of Lasers, 47, 0402010(2020).

    Xiaming Chen, Xiaonan Wang, Qipeng Dong, Zhen Zhu, Nagaumi Hiromi. Effect of Filling Material with Different Si Content on Microstructure and Properties of Laser-CMT Aluminum Alloy Joints[J]. Chinese Journal of Lasers, 2021, 48(22): 2202003
    Download Citation