[1] R H CHENG, Z S ZHANG, Z G CHEN. Technical characteristics and implementation of the fourth-generation jet fighter engiens. Acta Aero-nautica et Astronautica Sinica, 40, 022698(2019).

[2] Qiang LI, Chenguang GUO, Guangshuo DING et al. Research on milling subsurface layer damages of DD5 Ni-based single crystal superalloyxperimental study of nickel-based superalloy. China Mechanical Engineering, 31(21), 2638-2645(2020).

[3] YANG Wei. Experimental study on femtosecond laser micro hole machining of nockelbased superalloy [J]. Electromachining & Mould , 2021(4): 5660. (in Chinese)

[4] YANG Qin. Study on the influence of film cooling structure on the cooling aerodynmic perfmance of highpress turbine vane[D]. Harbin: Harbin Institute of Technology, 2019. (in Chinese)

[5] Z LIU, Y LU, Y LIU. The present situation and development of small holes machining technology. Journal of Physics. Conference Series, 1176, 42038(2019).

[6] C MCNALLY, J FOLKES, I PASHBY. Laser drilling of cooling holes in aeroengines: State of the art and future challenges. Materials Science and Technology, 20, 805-813(2004).

[7] N KUMAR, N MANDAL, A K DAS. Micro-machining through electrochemical discharge processes: A review. Materials and Manufacturing Processes, 35, 363-404(2020).

[8] ZHOU Xijie, XIE Herui, XU Jingji, et al. Experimental study on femtosecond laser processing nontaper microholes in injection components of liquid rocket engines[J]. Journal of Mechanical Engineering , 2024, 60(17): 357366. (in Chinese)

[9] A RUF, P BERGER, F DAUSINGER et al. Analytical investigations on geometrical influences on laser drilling. Journal of Physics. D, Applied Physics, 34, 2918-2925(2001).

[10] Yuantian LIN, Liang GUO, Qingmao ZHANG. The effects of steel drilling by ultra short laser abd the improvements of taper. Applied Laser, 35, 356-362(2015).

[11] KONONENKO T V, KLIMENTOV S M, GARNOV S V, et al. Hole fmation process in laser deep drilling with sht ultrasht pulses [C]Second International Symposium on Laser Precision Microfabrication, SPIE, 2002, 4426: 108112.

[12] Z ZHANG, W WANG, R JIANG et al. Investigation on geometric precision and surface quality of microholes machined by ultrafast laser. Optics & Laser Technology, 121, 105834(2020).

[13] S MARIMUTHU, M ANTAR, J DUNLEAVEY. Characteristics of micro-hole formation during fibre laser drilling of aerospace superalloy. Precision Engineering, 55, 339-348(2019).

[14] M L WANG, L J YANG, S ZHANG et al. Experimental investigation on the spiral trepanning of K24 superalloy with femtosecond laser. Optics & Laser Technology, 101, 284-290(2018).

[15] F Y ZHANG, J WANG, X WANG et al. Experimental study of nickel-based superalloy IN792 with femtosecond laser drilling method. Optics & Laser Technology, 143, 107335(2021).

[16] M LI, Z WEN, P WANG et al. Femtosecond laser high-quality drilling of film cooling holes in nickel-based single superalloy for turbine blades with a two-step helical drilling method. Journal of Materials Processing Technology, 312, 117827(2023).

[17] XU Jingji. Research on femtosecond laser processing technology of microholes in injection components of liquid rocket engines[D]. Xi’an: Xi’an Jiaotong University, 2022. (in Chinese)

[18] J AUERSWALD, A RUCKLI, T GSCHWILM et al. Taper angle correction in cutting of complex micro-mechanical contours with ultra-short pulse laser. J Mech Eng Autom, 6, 334-338(2016).

[19] Zhanwen A, Lingling CHEN, Ying WU. Controlling of diameter and taper in ultrafast laser helical drilling. Chinese Journal of Lasers, 48, 194-201(2021).

[20] Wanqin ZHAO, Xuesong MEI, Wenjun WANG. Ultrashort pulse laser drilling of micro-holes (part 1)- theoretical study. Infrared and Laser Engineering, 48, 140-148(2019).