[1] W HALLORAN J. Ceramic stereolithography: additive manufacturing for ceramics by photopolymerization. Annual Review of Materials Research, 46, 19-40(2016).
[2] O DUFAUD, S CORBEL. Oxygen diffusion in ceramic suspensions for stereolithography. Chemical Engineering Journal, 92, 55-62(2003).
[3] D WU H, L CHENG Y, W LIU et al. Effect of the particle size and the debinding process on the density of alumina ceramics fabricated by 3D printing based on stereolithography. Ceramics International, 42, 17290-17294(2016).
[4] L LI W, W LIU W, F QI et al. Determination of micro-mechanical properties of additive manufactured alumina ceramics by nanoindentation and scratching. Ceramics International, 45, 10612-10618(2019).
[5] M SCHWENTENWEIN, J HOMA. Additive manufacturing of dense alumina ceramics. International Journal of Applied Ceramic Technology, 12, 1-7(2015).
[6] Q ZHANG K, C XIE, G WANG et al. High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing. Ceramics International, 45, 203-208(2019).
[7] Q WU X, Q LIAN, C LI D et al. Effects of soft-start exposure on the curing characteristics and flexural strength in ceramic projection stereolithography process. Journal of the European Ceramic Society, 39, 3788-3796(2019).
[8] H XU X, X ZHOU S, F WU J et al. Preparation of highly dispersive solid microspherical α-Al2O3 powder with a hydrophobic surface for stereolithography-based 3d printing technology. Ceramics International, 46, 1895-1906(2020).
[9] B LI X, H ZHONG, X ZHANG J et al. Fabrication of zirconia all-ceramic crown via DLP-based stereolithography. International Journal of Applied Ceramic Technology, 17, 844-853(2020).
[10] S FU X, B ZOU, Y XING H et al. Effect of printing strategies on forming accuracy and mechanical properties of ZrO2 parts fabricated by SLA technology. Ceramics International, 45, 17630-17637(2019).
[11] X HE R, W LIU, W WU Z et al. Fabrication of complex-shaped zirconia ceramic parts via a DLP-stereolithography-based 3D printing method. Ceramics International, 44, 3412-3416(2018).
[12] B LI X, H ZHONG, X ZHANG J et al. Dispersion and properties of zirconia suspensions for stereolithography. International Journal of Applied Ceramic Technology, 17, 239-247(2020).
[13] X SUN J, J BINNER, M BAI J. Effect of surface treatment on the dispersion of nano zirconia particles in non-aqueous suspensions for stereolithography. Journal of the European Ceramic Society, 39, 1660-1667(2019).
[14] D WU H, W LIU, X HE R et al. Fabrication of dense zirconia- toughened alumina ceramics through a stereolithography-based additive manufacturing. Ceramics International, 43, 968-972(2017).
[15] Y LIU X, B ZOU, Y XING H et al. The preparation of ZrO2-Al2O3 composite ceramic by SLA-3D printing and sintering processing. Ceramics International, 46, 937-944(2020).
[16] Y XING H, B ZOU, Y LIU X et al. Effect of particle size distribution on the preparation of ZTA ceramic paste applying for stereolithography 3D printing. Powder Technology, 359, 314-322(2020).
[17] Y WANG Y, Y WANG Z, H LIU S et al. Additive manufacturing of silica ceramics from aqueous acrylamide based suspension. Ceramics International, 45, 21328-21332(2019).
[18] T CHARTIER, A BADEV, Y ABOULIATIM et al. Stereolithography process: influence of the rheology of silica suspensions and of the medium on polymerization kinetics-cured depth and width. Journal of the European Ceramic Society, 32, 1625-1634(2012).
[19] J BAE C, D KIM, W HALLORAN J. Mechanical and kinetic studies on the refractory fused silica of integrally cored ceramic mold fabricated by additive manufacturing. Journal of the European Ceramic Society, 39, 618-623(2019).
[20] M LASGORCEIX, E CHAMPION, T CHARTIER. Shaping by microstereolithography and sintering of macro-micro-porous silicon substituted hydroxyapatite. Journal of the European Ceramic Society, 36, 1091-1101(2016).
[21] Z WANG, Z HUANG C, J WANG et al. Development of a novel aqueous hydroxyapatite suspension for stereolithography applied to bone tissue engineering. Ceramics International, 45, 3902-3909(2019).
[22] M PFAFFINGER, M HARTMANN, M SCHWENTENWEIN et al. Stabilization of tricalcium phosphate slurries against sedimentation for stereolithographic additive manufacturing and influence on the final mechanical properties. International Journal of Applied Ceramic Technology, 14, 499-506(2017).
[23] W CHEN Z, B LIU C, J LI J et al. Mechanical properties and microstructures of 3D printed bulk cordierite parts. Ceramics International, 45, 19257-19267(2019).
[24] J HE R, P ZHOU N, Q ZHANG K et al. Progress and challenges towards additive manufacturing of SiC ceramic. Journal of Advanced Ceramics, 10, 637-674(2021).
[25] R SEFIU A, X DING Y, X SHU F et al. Photopolymerization- based additive manufacturing of ceramics: a systematic review. Journal of Advanced Ceramics, 10, 442-471(2021).
[26] Y LIU, W CHEN Z. Research progress in photopolymerization- based 3D printing technology of ceramics. Journal of Materials Engineering, 2020, 1-12.
[27] J TANG, Y YANG, R HUANG Z. Research progress of silicon carbide ceramic slurry based 3D printing. Materials Reports, 35, 8.
[28] L GRIFFITH M, W HALLORAN J. Scattering of ultraviolet radiation in turbid suspensions. Journal of Applied Physics, 81, 2538-2546(1997).
[29] J DING G, J HE R, Q ZHANG K et al. Stereolithography-based additive manufacturing of gray-colored SiC ceramic green body. Journal of the American Ceramic Society, 102, 7198-7209(2019).
[30] C WU K, F SEEFELDT K, J SOLOMON M et al. Prediction of ceramic stereolithography resin sensitivity from theory and measurement of diffusive photon transport. Journal of Applied Physics, 98, 10(2005).
[31] R BURGER, L WENDLAND W. Sedimentation and suspension flows: historical perspective and some recent developments. Journal of Engineering Mathematics, 41, 101-116(2001).
[32] W CHEN Z, Y LI Z, J LI J et al. 3D printing of ceramics: a review. Journal of the European Ceramic Society, 39, 661-687(2019).
[33] M WANG, C XIE, J HE R et al. Polymer-derived silicon nitride ceramics by digital light processing based additive manufacturing. Journal of the American Ceramic Society, 102, 5117-5126(2019).
[34] Y DE HAZAN, D PENNER. SiC and SiOC ceramic articles produced by stereolithography of acrylate modified polycarbosilane systems. Journal of the European Ceramic Society, 37, 5205-5212(2017).
[35] J TANG, T GUO X, T CHANG H et al. The preparation of SiC ceramic photosensitive slurry for rapid stereolithography. Journal of the European Ceramic Society, 41, 7516-7524(2021).
[36] C VRANCKENAND K, K POSSEMIERS, P VAN DER VOORT et al. Surface modification of silica gels with aminoorganosilanes. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 98, 235-241(1995).
[37] D LIU, G MALGHAN S. Role of polyacrylate in modifying interfacial properties and stability of silicon nitride particles in aqueous suspensions. Colloids & Surfaces A Physicochemical & Engineering Aspects, 110, 37-45(1996).
[38] X XIAO C, Q NI, HAN CHEN et al. Effect of polyvinylpyrrolidone on rheology of aqueous SiC suspensions dispersed with poly(aspartic acid). Colloids and Surfaces A: Physicochemical and Engineering Aspects, 399, 108-111(2012).
[39] W LIU G, Z ZHANG X, J YANG et al. Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): joining processes, joint strength, and interfacial behavior. Journal of Advanced Ceramics, 8, 19-38(2019).
[40] W CHEN X, F CHENG G, M ZHANG J et al. Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior. Journal of Advanced Ceramics, 9, 567-575(2020).
[41] H EOM J, W KIM Y, S RAJU. Processing and properties of macroporous silicon carbide ceramics: a review. Journal of Asian Ceramic Societies, 1, 220-242(2013).
[42] C ZHAO R, X BAO J. Lightweight structure and mirror blank formation of the SiC ceramic mirror with large caliber. Optics & Optoelectronic Technology, 12, 65-69(2014).
[43] B WU H, J YAN Y, L LIU G et al. Effects of grain grading on microstructures and mechanical behaviors of pressureless solid-state-sintered SiC. International Journal of Applied Ceramic Technology, 12, 976-984(2015).
[44] Y LI, Q GAO J, J F YANG. Preparation of complicated SiC green bodies via aqueous slip casting. Key Engineering Materials(2010).
[45] J BAI X, J DING G, Q ZHANG K et al. Stereolithography additive manufacturing and sintering approaches of SiC ceramics. Open Ceramics, 5, 100046(2021).
[46] H ZHANG, Y YANG, H HU K et al. Stereolithography-based additive manufacturing of lightweight and high-strength Cf/SiC ceramics. Additive Manufacturing, 34, 101199(2020).
[47] J DING G, J HE R, Q ZHANG K et al. Dispersion and stability of SiC ceramic slurry for stereolithography. Ceramics International, 46, 4720-4729(2020).
[48] J DING G, J HE R, Q ZHANG K et al. Stereolithography 3D printing of SiC ceramic with potential for lightweight optical mirror. Ceramics International, 46, 18785-18790(2020).
[49] Q HU C, F CHEN Y, S YANG T et al. Effect of SiC powder on the properties of SiC slurry for stereolithography. Ceramics International, 47, 12442-12449(2021).
[50] W CAO J, M IDREES, Q TIAN G et al. Complex SiC-based structures with high specific strength fabricated by vat photopolymerization and one-step pyrolysis. Additive Manufacturing, 48, 102430(2021).
[51] Y TIAN X, G ZHANG W, C LI D et al. Reaction-bonded SiC derived from resin precursors by stereolithography. Ceramics International, 38, 589-597(2012).
[52] G CHEN R, Q LIAN, N HE X et al. A stereolithographic diamond-mixed resin slurry for complex SiC ceramic structures. Journal of the European Ceramic Society, 41, 3991-3999(2021).
[53] Y XING H, B ZOU, F WANG X et al. Fabrication and characterization of SiC whiskers toughened Al2O3 paste for stereolithography 3D printing applications. Journal of Alloys and Compounds, 828, 154347(2020).
[54] K ZORAN, K VLADIMIR D. Silicon nitride: the engineering material of the future. Journal of Materials Science, 47, 535-552(2012).
[55] S HAMPSHIRE. Silicon nitride ceramics-review of structure, processing and properties. Journal of Achievements of Materials and Manufacturing Engineering, 24, 2685-2689(2007).
[56] L RILEY F. Silicon nitride and related materials. Journal of the American Ceramic Society, 83, 245-265(2000).
[57] Y XING H, B ZOU, Y LIU X et al. Fabrication strategy of complicated Al2O3-Si3N4 functionally graded materials by stereolithography 3D printing. Journal of the European Ceramic Society, 40, 5797-5809(2020).
[58] F CHEN R, Y DUAN W, G WANG et al. Preparation of broadband transparent Si3N4-SiO2 ceramics by digital light processing (DLP) 3D printing technology. Journal of the European Ceramic Society, 41, 5495-5504(2021).
[59] B LI X, X ZHANG J, S DUAN Y et al. Rheology and curability characterization of photosensitive slurries for 3D printing of Si3N4 ceramics. Applied Sciences, 10, 6438(2020).
[60] J HUANG R, G JIANG Q, D WU H et al. Fabrication of complex shaped ceramic parts with surface-oxidized Si3N4 powder via digital light processing based stereolithography method. Ceramics International, 45, 5158-5162(2019).
[61] X SHEN, A GAO Y, Z XU. Research and application of silane coupling agents. Shanghai Journal of Biomedical Engineering, 27, 14-17(2006).
[62] Y LIU, N ZHAN L, Y HE et al. Stereolithographical fabrication of dense Si3N4 ceramics by slurry optimization and pressure sintering. Ceramics International, 46, 2063-2071(2020).
[63] Z TIAN, P YANG Y, Y WANG et al. Fabrication and properties of a high porosity H-BN-SiO2 ceramics fabricated by stereolithography- based 3D printing. Materials Letters, 236, 144-147(2019).
[64] H SHI B, Y SHANG Y, P ZHANG et al. Dynamic capillary-driven additive manufacturing of continuous carbon fiber composite. Matter, 2, 1594-1604(2020).
