• Laser & Optoelectronics Progress
  • Vol. 61, Issue 21, 2114005 (2024)
Zhao Zhang, Maomao Cui, Xiao Wang*, Wenkai Shen..., Tao Wang and Huixia Liu|Show fewer author(s)
Author Affiliations
  • School of Mechanical Engineering, Jiangsu University, Jiangsu 212013, Zhenjiang , China
  • show less
    DOI: 10.3788/LOP240599 Cite this Article Set citation alerts
    Zhao Zhang, Maomao Cui, Xiao Wang, Wenkai Shen, Tao Wang, Huixia Liu. Parameter Modeling and Optimization of Laser Stereolithography Process for Alumina Ceramics[J]. Laser & Optoelectronics Progress, 2024, 61(21): 2114005 Copy Citation Text show less
    References

    [1] Liu Y, Chen Z W. Research progress in photopolymerization-based 3D printing technology of ceramics[J]. Journal of Materials Engineering, 48, 1-12(2020).

    [2] Chen Z W, Li Z Y, Li J J et al. 3D printing of ceramics: a review[J]. Journal of the European Ceramic Society, 39, 661-687(2019).

    [3] Gu Y, Wang G, Duan W Y et al. Application and prospect of photopolymerization technologies for ceramics[J]. Journal of the Chinese Ceramic Society, 49, 867-877(2021).

    [4] Sun D, Chen S, Shi Y S et al. Research progress of ceramic cores and shells prepared by laser additive manufacturing[J]. Chinese Journal of Lasers, 49, 1202002(2022).

    [5] Wang Z Y, Zhao Y H, Zhao J B et al. Research status and development trend of ceramic precursors[J]. Vacuum, 57, 67-75(2020).

    [6] Chen Q H, Zou B, Lai Q G et al. Influence of irradiation parameters on the curing and interfacial tensile strength of HAP printed part fabricated by SLA-3D printing[J]. Journal of the European Ceramic Society, 42, 6721-6732(2022).

    [7] Cao Y, Hu J L, Chen Z J et al. Effects of different binder and sintering temperature on mechanical properties and microstructure of alumina ceramics[J]. Powder Metallurgy Industry, 33, 119-124(2023).

    [8] Liu W W, Li M S, Nie J B et al. Synergy of solid loading and printability of ceramic paste for optimized properties of alumina via stereolithography-based 3D printing[J]. Journal of Materials Research and Technology, 9, 11476-11483(2020).

    [9] Zhang K Q, He R J, Ding G J et al. Effects of fine grains and sintering additives on stereolithography additive manufactured Al2O3 ceramic[J]. Ceramics International, 47, 2303-2310(2021).

    [10] Qian C C, Hu K H, Wang H Y et al. The effect of particle size distribution on the microstructure and properties of Al2O3 ceramics formed by stereolithography[J]. Ceramics International, 48, 21600-21609(2022).

    [11] Li H, Elsayed H, Colombo P. Enhanced mechanical properties of 3D printed alumina ceramics by using sintering aids[J]. Ceramics International, 49, 24960-24971(2023).

    [12] Yang B B, Wang S R, Wang G Q et al. Mechanical properties and wear behaviors analysis of fluorapatite glass-ceramics based on stereolithography 3D printing[J]. Journal of the Mechanical Behavior of Biomedical Materials, 124, 104859(2021).

    [13] Wang W J, Qian C, Hu M L et al. Optimisation of scanning parameters in stereolithography for dental zirconia ceramic fabrication[J]. Advances in Applied Ceramics, 119, 244-251(2020).

    [14] Pan L J, Chen W F, Zhou Y F et al. Parameter optimization of laser-induced breakdown spectroscopy experimental device based on response surface methodology[J]. Chinese Journal of Lasers, 47, 0911001(2020).

    [15] Yu J, Cai C, Xie J et al. Process parameter optimization for laser-arc hybrid welding of low-carbon bainite steel based on response surface methodology[J]. Chinese Journal of Lasers, 49, 1602018(2022).

    [16] Chen Y J, Lu W T, Yang Y T. Optimization of laser paint removal process for carbon fiber composite substrate based on response surface analysis[J]. Chinese Journal of Lasers, 50, 1202208(2023).

    Zhao Zhang, Maomao Cui, Xiao Wang, Wenkai Shen, Tao Wang, Huixia Liu. Parameter Modeling and Optimization of Laser Stereolithography Process for Alumina Ceramics[J]. Laser & Optoelectronics Progress, 2024, 61(21): 2114005
    Download Citation