Selective Laser Sintering of SiC Green Body with Low Binder Content

Longzhi HUANG; Jie YIN; Xiao CHEN; Xinguang WANG; Xuejian LIU; Zhengren HUANG

doi:10.15541/jim20210699

[1] R PRADEEP K, A KUMAR P, C NAGARAJ M et al. Solidification processing of cast metal matrix composites over the last 50 years and opportunities for the future. The Journal of The Mineral, Metals & Materials Society, 72, 2912-2926(2020).

[2] P GARG, A JAMWAL, D KUMAR et al. Advance research progresses in aluminium matrix composites: manufacturing & applications. Journal of Materials Research and Technology, 8, 4924-4939(2019).

[3] N LI, W LIU, Y WANG et al. Laser additive manufacturing on metal matrix composites: a review. Chinese Journal of Mechanical Engineering, 34, 38(2021).

[4] X BAO J, G ZHANG, Q CAO et al. Influence of TiO₂ dopant on spontaneous infiltration to fabricate high volume fraction SiCp/Al cermets. Ceramics International, 46, 5459-5464(2020).

[5] M DONG S, Y ZHANG X, S YANG J et al. Optimizing microstructure and properties of SiCf/SiC composites prepared by reactive melt infiltration. Journal of Inorganic Materials, 36, 1103-1110(2021).

[6] M MAURYA, S KUMAR, V BAJPAI. Assessment of the mechanical properties of aluminium metal matrix composite: a review. Journal of Reinforced Plastics and Composites, 38, 267-298(2018).

[7] J HE R, P ZHOU N, Q ZHANG K et al. Progress and challenges towards additive manufacturing of SiC ceramic. Journal of Advanced Ceramics, 10, 637-674(2021).

[8] H HASSANIN, K ESSA, A ELSHAER et al. Micro-fabrication of ceramics: additive manufacturing and conventional technologies. Journal of Advanced Ceramics, 10, 1-27(2021).

[9] G LIU, F ZHANG X, L CHEN X et al. Additive manufacturing of structural materials. Materials Science and Engineering: R: Reports, 145, 100596(2021).

[10] N TRAVITZKY, A BONET, B DERMEIK et al. Additive manufacturing of ceramic-based materials. Advanced Engineering Materials, 16, 729-754(2014).

[11] W CHEN Z, Y LI Z, J LI J et al. 3D printing of ceramics: a review. Journal of the European Ceramic Society, 39, 661-687(2019).

[12] Q SUN Z, Y LÜ, Q LI S et al. Ceramic/resin composite powders with uniform resin layer synthesized from SiO₂ spheres for 3D technology. Journal of Inorganic Materials, 34, 567-572(2019).

[13] P ZHOU, H QI, Z ZHU et al. Development of SiC/PVB composite powders for selective laser sintering additive manufacturing of SiC. Materials (Basel), 11, 9(2018).

[14] W XIONG B, H YU, F XU Z et al. Study on dual binders for fabricating SiC particulate preforms using selective laser sintering. Composites Part B-Engineering, 48, 129-133(2013).

[15] D GOODRIDGE R, J TUCK C, R J M HAGUE. Laser sintering of polyamides and other polymers. Progress in Materials Science, 57, 229-267(2012).

[16] J SHANG X, M ZHU Y, H LI Z. Surface modification of silicon carbide with silane coupling agent and hexadecyl iodiele. Applied Surface Science, 394, 169-177(2017).

微信扫一扫：分享

微信扫一扫：分享