[1]
[2]
[3]
[4] F F Huang, M L Huang. Complexation behavior and co-electrodeposition mechanism of Au–Sn alloy in highly stable non-cyanide bath. J Electrochem Soc, 165, D152(2018).
[5] Z X Zhu, C C Li, L L Liao et al. Au–Sn bonding material for the assembly of power integrated circuit module. J Alloys Compd, 671, 340e345(2016).
[6] S F Liu, D X Zhang, J R Xiong et al. Microstructure evolution and properties of rapidly solidified Au-20Sn eutectic solder prepared by single-roll technology. J Alloys Compd, 781, 873e882(2019).
[7] G Zeng, S McDonald, K Nogita. Development of high-temperature solders: review. Microelectron Reliab, 52, 1306e1322(2012).
[8] H Zhang, J Minter, N C Lee. A brief review on high-temperature, Pb-free die-attach materials. J Electr Mater, 48, 201(2019).
[9] C W Dua, R Soler, B Völker et al. Au–Sn solders applied in transient liquid phase bonding: Microstructure and mechanical behavior. Materialia, 8, 100503(2019).
[10] J Doesburg, D G Ivey. Microstructure and preferred orientation of Au–Sn alloy plated deposits. Mater Sci Eng B, 78, 44(2000).
[11] P Y Wen, D Y Li, S M Zhang et al. High accuracy thermal resistance measurement in GaN/InGaN laser diodes. Solid-State Electron, 106, 50(2015).
[12] D S Kim, C Holloway, B T Han et al. Method for predicting junction temperature distribution in a high-power laser diode bar. Appl Opt, 55, 7487(2016).
[13] Y B Qiao, S W Feng, C Xiong et al. The thermal properties of AlGaAs/GaAs laser diode bars analyzed by the transient thermal technique. Solid-State Electron, 79, 192(2013).
[14] Y T Liu, Q Cao, G F Song et al. The junction temperature and forward voltage relationship of GaN-based laser diode. Laser Phys, 19, 400(2009).
[15] Y Xi, J Q Xi, T Gessmann et al. Junction and carrier temperature measurements in deep-ultraviolet light-emitting diodes using three different methods. Appl Phys Lett, 86, 031907(2005).
[16] K J Min, K Seungtaek, K S Bok et al. An analysis of transient thermal properties for high power GaN-based laser diodes. Phys Status Solidi C, 7, 1801(2010).
[17] P Y Wen, D Y Li, S M Zhang et al. Identification of degradation mechanisms based on thermal characteristics of InGaN/GaN laser diodes. IEEE J Sel Top Quantum Electron, 21, 1500506(2015).
[18] J Ciulik, M R Notis. The Au–Sn phase diagram. J Alloys Compnd, 191, 71(1993).
[19] J W R Teo, F L Ng, L S K Goi et al. Microstructure of eutectic 80Au/20Sn solder joint in laser diode package. Microelectron Eng, 85, 512(2008).
[20] H M Chung, C M Chen, C P Lin et al. Microstructural evolution of the Au-20 wt.% Sn solder on the Cu substrate during reflow. J Alloys Compd, 485, 219(2009).
[21]
[22] T C Hsiao, A D Lin, W Y Chan. Laser soldered eutectic die-bonding processes in LED packaging. Sens Mater, 28, 409(2016).
[23] S W Yoon, W K Choi, H M Lee. Improving the performance of lead-free solder reinforced with multi-walled carbon nanotubes. Scripta Mater, 40, 297(1999).
[24] N S Javid, R Sayyadi, F Khodabakhshi. Lead-free Sn-based/MW-CNTs nanocomposite soldering: effects of reinforcing content, Ni-coating modification, and isothermal ageing treatment. J Mater Sci: Mater Electron, 30, 4737(2019).
[25] X Q Shi, H F Kwan, S M L Nai et al. Kinetics of interface reaction and intermetallics growth of Sn-3.5Ag-0.7Cu/Au/Ni/Cu system under isothermal aging. J Mater Sci Lett, 39, 1095(2004).
[26] Q B Tan, C Deng, Y Mao et al. Evolution of primary phases and high-temperature compressive behaviors of as-cast AuSn20 alloys prepared by different solidification pathways. Gold Bull, 44, 27(2011).
[27] T J Ronnie, D S Patil. Advances in high-power laser diode packaging. Semiconductor Laser Diode Technology and Applications, 321(2012).
[28] J W R Teo, X Q Shi, G Y Li et al. Modified face-down bonding of ridge-waveguide lasers using hard solder. IEEE Trans Electron Pack Manuf, 31, 159(2008).
