Review of Embedded Optical Fiber Smart Metal Structure

Rao Chunfang; Zhang Hua; Feng Yan; Li Yulong

doi:10.3788/lop47.102801

[1] Tu Yaqing, Liu Xingchang. Intelligent Structurde Based on Optical Fibers［M］. BeiJing: Advanced Education Press, 2005. 7

[2] Lü Chenggang, Zhang Wu, Ge Chungfeng et al.. The estimation of static load test on root type caisson foundation based on FBG sensor networks［J］. Chinese J. Sens. Actualors, 2010, 23(2): 282~286

[3] Zhu Honghu, Yin Jianhua, Hong Chengyu et al.. Fiber optic based monitoring technologies of slope engineering［J］. Geotechnical Investigation & Surveying, 2010, 3: 7~10

[4] Y. L. Park, S. C. Ryu, R. J. Black et al.. Exoskeletal force-sensing end-effectors with embedded optical fiber-bragg-grating sensors［J］. IEEE Trans. Robot., 2009, 25(6): 1319~1331

[5] Zhao Yanling, Zhao Hong, Zhang Jian et al.. Reseach on optical current transformer based on the fiber Bragg grating［J］. Acta Optica Sinica, 2010, 30(4): 949~953

[6] Liu Yuliang, He Jun, Wang Yongjie et al.. Progress of science wave detection by fiber-optic sensors［J］. Laser & Optoelectronics Progress, 2009, 46(11): 21~28

[7] Zhang Weigang. Design on fiber cavity ring-down spectroscopy system and investigating on liquid sensing［J］. Laser & Optoelectronics Progress, 2001, 47(3): 030601

[8] Song Muping, Qiu Chao. Long-distance brillion optical time domain reflectometer with two-parameter sensing for standard sing-mode optical fiber［J］. Acta Optica Sinica, 2010, 30(4): 954~958

[9] Hong Xiaobin, Guo Hongxiang, Wu Jian. A Brillion optical time dimain analysis based distributed fiber optical fiber instrusion sensor system［J］. Chinese J. Lasers, 2010, 37(4): 1037~1041

[10] Xie Jianfeng. Research on fiber protected technics and temperature sensing proterties of smart structure［D］. Nanchang: Nanchang University, 2007. 25

[11] C. E. Lee, W. N. Gibler, R. A. Atkins et al.. Metal-embedded fiber-optic Fabry-Perot sensors［J］. Opt. Lett., 1991, 16(24): 1990~1992

[12] X. C. Li, F. Prinz. Analytical and experimental study on noncontact sensing with embedded fiber-optic sensors in rotatin metal parts［J］. J. Lightwave Technol., 2004, 22(7): 1720~1727

[13] X. C. Li, J. Johnsen, J. Groza et al.. Processing and microstructures of fiber Bragg grating sensors embedded in stainless steel［J］. Metall. Mater. Trans. A, 2002, 33(9): 3019~3024

[14] X. C. Li, W. L. Tang, A. Golnas. Embedding and characterization of fiber-optic and thin-film sensors in metallic structures［J］. Sens. Rev., 2004, 24(4): 370~377

[15] H. Bartelt, K. Suhuster, S. Unger et al.. Single-pulse fiber Bragg gratings and specific coatings for use at elevated temperatures［J］. Appl. Opt., 2007, 46(17): 3417~3424

[16] Feng Yan, Zhang Hua, Li Yulong et al.. Temperature sensitization model of fiber bragg grating with metal coating［J］. Acta Optica Sinica, 2009, 29（2）: 336~341

[17] J. F. Xie, H. Zhang, Z. Q. Zhu et al.. A study of the temperature sensitivity of fiber Bragg grating after metallization［J］. Smart Mater. Struct., 2007, 16: 1837~1842

[18] Y. L. Li, H. Zhang, Y. Feng et al.. Metal coating of fiber Bragg grating and the temperature sensing character after metallization［J］. Opt. Fiber Technol., 2009, 15: 391~397

[19] Guo mingjin, Jiang Desheng. Low temperature properties of fiber Bragg grating temperature sensor with plating gold［J］. Chin. J. Low Temp. Phys., 2006, 28（2）: 138~141

[20] Jiang Desheng, Xu Haipeng, Li Xiaopu. Research of quartz optic fiber surface metallization for using in high-temperature［J］. J. Wuhan University of Technology, 2008, 30(4): 1~4

[21] R. S. Shen. Research of metal-coated and sensing technology applications on FBG［D］. Dalian: Dalian University of Technology, 2008. 40~53

[22] R. S. Shen, J. Zhang, Y. Wang et al.. Study on high-temperature and high-pressure measurement by using metal-coated FBG［J］. Microwave Opt. Technol. Lett., 2008, 50(5): 1138~1140

[23] Feng Yan, Zhang Hua, Li Yulong et al.. Technology for electroless plating Ni-P2-ZrO2 composite coating for bragg fiber grating［J］. J. Mater. prot., 2008, 41(12): 59~60

[24] Peng Gang, Zhang Hua, Li Yulong et al.. Research on electroless Cu-plating on fiber Bragg grating sensor［J］. Mater. Rev., 2008, 22（9）: 77~79

[25] S. T. Shiue, Y. S. Lin. Thermal stress in metal-coated optical fibers［J］. J. Appl. Phys., 1998, 83(11): 5719~5723

[26] S. T. Shiue. Thermal stressed in hermetically double-coated optical fibers［J］. J. Appl. Phys., 1999, 85(6): 3044~3050

[27] S. T. Shiue. Effect of coating thickness on thermal stresses in tungsten-coated optical fibers［J］. J. Appl. Phys., 2000, 87(8): 3759~3762

[28] T. Shiue, C. H. Yang, R. S. Chu et al.. Effect of the coating thickness and roughness on the mechanical strength and thermally induced stress voids in nickel-coated optical fibers prepared by electroless plating method［J］. Thin Solid Film, 2005, 485: 169~174

[29] C. Lupi, F. Felli, A. Brotzu et al.. Improving FBG sensor sensitivity at cryogenic temperature by metal coating［J］. IEEE Sens. J., 2008, 8(7): 1299~1303

[30] C. Lupi, F. Felli, L. Lppoliti et al.. Metal coating for enhancing the sensitivity of fibre bragg grating sensors at cryogenic temperature［J］. Smart Mater. Struct., 2005, 14: N71~N76

[31] M. Ciotti, V. Nardelli, M. A. Caponero et al.. An optical system for cryogenic temperature measurements［J］. Smart Mater. Struct., 2007, 16: 1708~1711

[32] C. Lupi, F. Felli, M. A.Caponero et al.. The effectiveness of metal coating on FBG sensors sensitivity at cryogenic temperature［C］. SPIE, 2007, 6619: 661916

[33] S. Sandlin, A. Hokkanen. Embedding optical fibers in metal alloys［J］. IEEE Instru. Meas. Mag. 2003, 6: 31~36

[34] S. Sandlin, T. Kinnunen, J. Rm et al.. A simple method for metal re-coating of optical fiber bragg gratings［J］. Surf. Coa. Technol., 2006, 201: 3061~3065

[35] C. Y. Kong, R. Soar. Method for embedded optical fibers in an aluminum matrix by ultrasonic consolidation［J］. Appl. Opt., 2005, 44(30): 6325~6333

[36] C. Mou, P. Saffarz. D. Li et al.. Smart structure sensors based on embedded fibre Bragg grating arrays in aluminium alloy matrix by ultrasonic consolidation［J］. Meas. Sci. Technol., 2009, 20(3): 034013

[37] Li Yulong, Feng Yan, Zhang Hua et al.. Fiber bragg grating sensor metallization and embedding into 42CrMo steel by soldering［J］. Trans. Chin. Welding Ins., 2008, 29(3): 69~72

[38] X. C. Li, F. Prinz, J. Seim. Thermal behavior of a metal embedded fiber Bragg grating sensor［J］. Smart Materals Struct., 2001, 10(4): 575~579

[39] Feng Yan, Zhang Hua, Li Yulong. Experiment on embedding FBG sensor into intelligent metal structures［J］. Piezoelectrics & Acoustooptics, 2009, 31(3): 334~336