[1] Zhao X C, Wu Y F, Xie Y et al. Uniformity simulation and research based on PCB exposure machine illuminating system[J]. Optical Instruments, 32, 52-57(2010).
[2] Zhao X C, Liu N W, Wang W et al. Research and design on PCB exposure machine illuminating system based on light tools[J]. Optics and Optoelectronic Technology, 12, 41-44(2014).
[3] Zhang X C. Research on key technologies of automatic alignment parallel optical exposure machine based on machine vision[D]. Chengdu: University of Electronic Science and Technology of China(2012).
[4] Yin G Y, You L B, Wang Q S et al. Line beam shaping system for preparation of low temperature poly-silicon[J]. Chinese Journal of Lasers, 44, 0906002(2017).
[6] Baxter G R, Tesone J, method with optical registration, material variation compensation: US5337151[P]. -08-09(1994).
[7] Antoni M, Singer W, Schultz J et al. Illumination optics design for EUV lithography[C]. SPIE, 4146, 25-34(2000).
[8] Zhou C, Li X F. Projective stepper for 200 mm×200 mm OLED process[J]. Equipment for Electronic Products Marufacturing, 41, 12-16(2012).
[9] Dong H, Zhang Y F, Li H et al. Light pipe illumination system design for new laser projection display[J]. Laser & Optoelectronics Progress, 49, 012202(2012).
[10] Liu P F, Yang B, Lu K. Design and research on the uniform illumination system of UV exposure machine[J]. Optical Instruments, 34, 31-36(2012).
[11] Lei C Q, Wang Y F, Yin Z Y et al. Homogenization system for diode laser stack beams based on microlens array[J]. Chinese Journal of Lasers, 42, 0502009(2015).
[12] Shuai C F, Yin S Y, Liu X M et al. Homogenized white light beam generated by red, green and blue lasers based on double fly-eye lens[J]. Acta Optica Sinica, 36, 0314002(2016).
[13] Min X H[J]. Exposure machine fly eye type UV-LED surface light source of collimated light system Printed Circuit Information, 2014, 33-37.
[15] Zhou P, Lu W, Lin Y X et al. Fly eye lens array used in liquid crystal projection display with high light efficiency[J]. Acta Optica Sinica, 24, 587-591(2004).
[18] Wan Y J, Liu J, Lin H B et al. Fresnel lens of freeform surface for realizing uniform light distribution on general LED light sources[J]. Laser & Optoelectronics Progress, 53, 062201(2016).
[19] Wu R M. Research on the design method of freeform illumination[D]. Hangzhou: Zhejiang University(2013).
[20] Fruendt J, Jarczynski M, Mitra T. Simultaneous multiple uniform spot generation with micro optics[C]. SPIE, 7062, 70620S(2008).
[21] Li C, Li N. A LED lens design method for uniform illumination[J]. China Illuminating Engineering Journal, 21, 46-49(2010).
[22] Yan X T, Yang J F, Zhang G Q et al. Freeform LED lens design based on longitude-latitude division and tangent-plane iteration[J]. Laser & Optoelectronics Progress, 48, 022201(2011).