Researching | Effect of Film Formation Processes of NiOx Mesoporous Layer on Performance of Perovskite Solar Cells with Carbon Electrodes

Journals >Journal of Inorganic Materials >Volume 38 >Issue 9 >Page 1103 > Article

Journal of Inorganic Materials
Vol. 38, Issue 9, 1103 (2023)

Effect of Film Formation Processes of NiO_x Mesoporous Layer on Performance of Perovskite Solar Cells with Carbon Electrodes

Wanli FANG^1,2, Lili SHEN², Haiyan LI², Xinyu CHEN²..., Zongqi CHEN², Chunhui SHOU³, Bin ZHAO^1,* and Songwang YANG^1,2,4,*|Show fewer author(s)

Author Affiliations

¹1. School of Materials and Chemistry, University of Shanghai for Science and Technology, Shanghai 200093, China

²2. CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 201899, China

³3. Key Laboratory of Solar Energy Utilization & Energy Saving Technology of Zhejiang Province, Zhejiang Energy Group R&D, Hangzhou 310003, China

⁴4. Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China

show less

DOI: 10.15541/jim20230002 Cite this Article

Wanli FANG, Lili SHEN, Haiyan LI, Xinyu CHEN, Zongqi CHEN, Chunhui SHOU, Bin ZHAO, Songwang YANG. Effect of Film Formation Processes of NiO_x Mesoporous Layer on Performance of Perovskite Solar Cells with Carbon Electrodes [J]. Journal of Inorganic Materials, 2023, 38(9): 1103 Copy Citation Text

show less

References

[1] M KIM, J JEONG, H LU et al. Conformal quantum dot-SnO₂ layers as electron transporters for efficient perovskite solar cells. Science, 375, 302(2022).

[2] M R SAMANTARAY, N K RANA, A KUMAR et al. Stability study of large-area perovskite solar cells fabricated with copper as low-cost metal contact. J. Energy Res., 46, 1250(2022).

[3] M YUE, H YUE, M ANYI et al. Application of lead acetate additive for printable perovskite solar cell. J. Inorg. Mater., 37, 197(2022).

[4] M G LAURA, R DANIEL, J FRANKLIN. Current status and trends of carbon-based electrodes for fully solution-processed perovskite solar cells. J. Energy Chem., 222(2021).

[5] S LIU, W HUANG, P LIAO et al. 17% efficient printable mesoscopic PIN metal oxide framework perovskite solar cells using cesium-containing triple cation perovskite. J. Mater. Chem. A, 5, 22952(2017).

[6] K D JAYAN, V SEBASTIAN. Comprehensive device modelling and performance analysis of MASnI₃ based perovskite solar cells with diverse ETM, HTM and back metal contacts. Sol. Energy, 40(2021).

[7] J WANG, Z ZHENG, Y ZU et al. A tandem organic photovoltaic cell with 19.6% efficiency enabled by light distribution control. Adv. Mater., 33, 2102787(2021).

[8] H WANG, Z HUANG, S XIAO et al. An in situ bifacial passivation strategy for flexible perovskite solar module with mechanical robustness by roll-to-roll fabrication. J. Mater. Chem. A, 9, 5759(2021).

[9] X XU, Z LIU, Z ZUO et al. Hole selective NiO contact for efficient perovskite solar cells with carbon electrode. Nano Lett., 15, 2402(2015).

[10] K CAO, Z ZUO, J CUI et al. Efficient screen printed perovskite solar cells based on mesoscopic TiO₂/Al₂O₃/NiO/carbon architecture. Nano Energy, 171(2015).

[11] X LIU, S REN, Z LI et al. Flexible transparent high-efficiency photoelectric perovskite resistive switching memory. Adv. Funct. Mater., 32, 2202951(2022).

[12] L TAO, Y ZHANG, H CHEN et al. Printable commercial carbon based mesoscopic perovskite solar cell using NiO/graphene as hole-transport materials. ECS J. Solid State Sci. Technol., 10, 105003(2021).

[13] S BHANDARI, A ROY, M S ALI et al. Cotton soot derived carbon nanoparticles for NiO supported processing temperature tuned ambient perovskite solar cells. Sci. Rep., 23388(2021).

[14] F JIANG, W C H CHOY, X LI et al. Post-treatment-free solution-processed non-stoichiometric NiO_x nanoparticles for efficient hole-transport layers of organic optoelectronic devices. Adv. Mater., 27, 2930(2015).

[15] J H LEE, I S JIN, J W JUNG. Binary-mixed organic electron transport layers for planar heterojunction perovskite solar cells with high efficiency and thermal reliability. Chem. Eng. J., 129678(2021).

[16] X M HOU, Y HU, H W LIU et al. Effect of guanidinium on mesoscopic perovskite solar cells. J. Mater. Chem. A, 5, 73(2017).

[17] J J ZHAO, X SU, Z MI et al. Trivalent Ni oxidation controlled through regulating lithium content to minimize perovskite interfacial recombination. Rare Metals, 41, 96(2022).

[18] Z LIU, B SUN, X LIU et al. Efficient carbon-based CsPbBr₃ inorganic perovskite solar cells by using Cu-phthalocyanine as hole transport material. Nano-Micro Lett., 10, 34(2018).

[19] R TSUJI, D BOGACHUK, B LUO et al. Activation of weak monochromic photocurrents by white light irradiation for accurate IPCE measurements of carbon-based multi-porous-layered-electrode perovskite solar cells. Electrochemistry, 88, 418(2020).

[20] X LIU, Y CHENG, C LIU et al. 20.7% highly reproducible inverted planar perovskite solar cells with enhanced fill factor and eliminated hysteresis. Energy Environ. Sci., 12, 1622(2019).

[21] P LIAO, X ZHAO, G LI et al. A new method for fitting current-voltage curves of planar heterojunction perovskite solar cells. Nano-Micro Lett., 5(2018).

[22] W KE, G FANG, J WAN et al. Efficient hole-blocking layer-free planar halide perovskite thin-film solar cells. Nat. Commun., 6700(2015).

[23] Y WANG, T MAHMOUDI, Y B HAHN. Highly stable and efficient perovskite solar cells based on FAMA-perovskite-Cu:NiO composites with 20.7% efficiency and 80.5% fill factor. Adv. Energy Mater., 10, 2000967(2020).

[24] A M A LEGUY, J M FROST, A P MCMAHON et al. The dynamics of methylammonium ions in hybrid organic-inorganic perovskite solar cells. Nat. Commun., 7124(2015).

[25] C CAI, K ZHOU, H GUO et al. Enhanced hole extraction by NiO nanoparticles in carbon-based perovskite solar cells. Electrochim. Acta, 100(2019).

[26] S LIU, S LI, J WU et al. Amide additives induced a Fermi level shift to improve the performance of hole-conductor-free, printable mesoscopic perovskite solar cells. J. Phy. Chem. Lett., 10, 6865(2019).

[27] X LI, W ZHANG, X GUO et al. Constructing heterojunctions by surface sulfidation for efficient inverted perovskite solar cells. Science, 375, 434(2022).

[28] Y ZHOU, X ZHANG, X LU et al. Promoting the hole extraction with Co₃O₄ nanomaterials for efficient carbon-based CsPbI₂Br perovskite solar cells. Solar RRL, 3, 1800315(2019).

[29] X CHEN, L LU, D GU et al. Chlorine management of a carbon counter electrode for high performance printable perovskite solar cells. J. Mater. Chem. C, 9, 8615(2021).

Figures&Tables (14)

References (29)

Copy Citation Text

Wanli FANG, Lili SHEN, Haiyan LI, Xinyu CHEN, Zongqi CHEN, Chunhui SHOU, Bin ZHAO, Songwang YANG. Effect of Film Formation Processes of NiO_x Mesoporous Layer on Performance of Perovskite Solar Cells with Carbon Electrodes [J]. Journal of Inorganic Materials, 2023, 38(9): 1103

Download Citation

Save the article for my favorites

Paper Information

Recommended Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology

Set citation alerts for the article

Please enter your email address