Powder Characteristics on the Rheological Performance of Resin-based Zirconia Suspension for Stereolithography

Xing-Bang LI; He ZHONG; Jing-Xian ZHANG; Yu-Sen DUAN; Dong-Liang JIANG

doi:10.15541/jim20190091

[1] WEI-CEN CHEN, FANG-FANG WANG, KANG YAN et al. Micro- stereolithography of KNN-based lead-free piezoceramics. Ceramics International, 45, 4880-4885(2019).

[2] YAN CHEN, XIU-LAN BAO, CHI-MAN WONG et al. PZT ceramics fabricated based on stereolithography for an ultrasound transducer array application. Ceramics International, 44, 22725-22730(2018).

[3] MAO-PENG ZHOU, WEI LIU, HAI-DONG WU et al. Preparation of a defect-free alumina cutting tool via additive manufacturing based on stereolithography-optimization of the drying and debinding processes. Ceramics International, 42, 11598-11602(2016).

[4] CHANG-JUN BAE, DANIEL KIM, W HALLORAN JOHN. Mechanical and kinetic studies on the refractory fused silica of integrally cored ceramic mold fabricated by additive manufacturing. Journal of the European Ceramic Society, 39, 618-623(2019).

[5] S MASCIANDARO, M TORRELL, P LEONE et al. Three-dimensional printed yttria-stabilized zirconia self-supported electrolytes for solid oxide fuel cell applications. Journal of the European Ceramic Society, 39, 9-16(2019).

[6] LU-YANG WEI, JIN-JIN ZHANG, FANG-YONG YU et al. A novel fabrication of yttria-stabilized-zirconia dense electrolyte for solid oxide fuel cells by 3D printing technique. International Journal of Hydrogen Energy, 44, 6182-6191(2019).

[7] WEI-ZHAO ZHOU, DI-CHEN LI, HUI WANG. A novel aqueous ceramic suspension for ceramic stereolithography. Rapid Prototyping Journal, 16, 29-35(2010).

[8] HAI-DONG WU, YAN-LING CHENG, WEI LIU et al. Effect of the particle size and the debinding process on the density of alumina ceramics fabricated by 3D printing based on stereolithography. Ceramics International, 42, 17290-17294(2016).

[9] HAI-DONG WU, WEI LIU, RONG-XUAN HE et al. Fabrication of dense zirconia-toughened alumina ceramics through a stereolithography-based additive manufacturing. Ceramics International, 43, 968-972(2017).

[10] SHUAI ZHANG, NA SHA, ZHE ZHAO. Surface modification of α-Al₂O₃ with dicarboxylic acids for the preparation of UV-curable ceramic suspensions. Journal of the European Ceramic Society, 37, 1607-1616(2017).

[11] SE-YEON SONG, MIN-SOO PARK, JUNG-WOO LEE et al. A study on the rheological and mechanical properties of photo-curable ceramic/polymer composites with different silane coupling agents for SLA 3D printing technology. Nanomaterials, 8, 93-104(2018).

[12] MACIEJ WOZNIAK, YORAM DE HAZAN, THOMAS GRAULE et al. Rheology of UV curable colloidal silica dispersions for rapid prototyping applications. Journal of the European Ceramic Society, 31, 2221-2229(2011).

[13] V ADAKE CHANDRASHEKHAR, PARAG BHARGAVA, PRASANNA GANDHI. Effect of surfactant on dispersion of alumina in photopolymerizable monomers and their UV curing behavior for microstereolithography. Ceramics International, 41, 5301-5308(2015).

[14] KE-QIANG ZHANG, CHEN XIE, GANG WANG et al. High solid loading, low viscosity photosensitive Al₂O₃ slurry for stereolithography based additive manufacturing. Ceramics International, 45, 203-208(2019).

[15] XIANG-QUAN WU, QIN LIAN, DI-CHEN LI et al. Influence of boundary masks on dimensions and surface roughness using segmented exposure in ceramic 3D printing. Ceramics International, 45, 3687-3697(2019).

[16] M KRIEGER IRVIN, J DOUGHERTY THOMAS. A mechanism for non-newtonian flow in suspensions of rigid spheres. Transactions of the Society of Rheology, 3, 137-152(1959).