Pyrolysis Behavior and Laser Ablation Resistance of PCS in Polycarbosilane Composite Coatings

Jia CAI; Fangxia ZHAO; Dong FAN; Liping HUANG; Yaran NIU; Xuebin ZHENG; Zhenzhong ZHANG

doi:10.15541/jim20230143

[2] D Hambling. US Army laser weapon to be most powerful ever. The New Scientist, 12(2021).

[4] Y XIONG, K YAN, H Y YU et al. Comparative investigation on the hot corrosion failure of YSZ and GdYb-YSZ double-ceramic- layer thermal barrier coatings under Na₂SO₄+V₂O₅ molten salts. Ceramics International, 18678(2023).

[5] J SHAO, T JITSUNO, W RUDOLPH et al. Study on high power CW laser's irradiation effect on yttria-stabilized zirconia coating. Society of Photo-Optical Instrumentation Engineers (SPIE) Conference Series, 1(2017).

[6] Y ZOU, L L ZHAO, L J YOU et al. Preparation and numerical simulation investigation of high reflectance anti-laser-ablation coating. Journal of Inorganic Materials, 869(2016).

[7] Y CHEN, C PING, C HONG et al. Improved ablation resistance of carbon-phenolic composites by introducing zirconium diboride particles. Composites Part B, 320(2013).

[8] S CHEN, C ZHANG, Y ZHANG et al. Effects of polymer derived SiC interphase on the properties of C/ZrC composites. Materials and Design, 102(2014).

[9] A HORCHER, K TANGERMANN-GERK, G BARROSO et al. Laser and furnace pyrolyzed organosilazane-based glass/ZrO₂ composite coating system-a comparison. Journal of the European Ceramic Society, 2642(2019).

[10] R LIU, X Y LIU, Y F WANG et al. Laser ablation behavior and mechanism of C_f/SiC-ZrC ultra-high temperature ceramic matrix composite prepared by PIP method. Ceramics International, 23610(2021).

[11] Kiyohito, Okamura, Tadao et al. Application of radiation curing in the preparation of polycarbosilane-derived SiC fibers. Journal of Inorganic & Organometallic Polymers, 171(1992).

[12] Y W FEI, X F YU, W H TANG et al. Study on SiC fine ceramic anti-laser reinforcement material. Ordnance Material Science and Engineering, 39(2001).

[13] J H NIU, S H MENG, H JIN et al. Thermal stability and nanostructure evolution of amorphous SiCN ceramics during laser ablation in an argon atmosphere. Journal of the European Ceramic Society, 4535(2019).

[15] Z F XIE, Z H CHEN, Y Q LI et al. Application of active fillers in the preparation of polycarbosilane derived ceramics. Journal of National University of Defense Technology, 27(2000).

[16] C C TINGA, S Y CHENA, D M LIUB et al. Preferential growth of thin rutile TiO₂ films upon thermal oxidation of sputtered Ti films. Thin Solid Films, 290(2002).

[17] Y Y PAN, B LIANG, D HONG et al. High temperature long-term service performance of TiAlCrY/YSZ coating on TiAl alloy. Journal of Inorganic Materials, 105(2023).

[18] Y Y PAN, B LIANG, Y R NIU et al. Thermal shock behaviors of plasma sprayed YSZ/TiAlCrY system on TiAl alloy. Ceramics International, 6199(2022).

[19] H Q LY, R TAYLOR, R J DAY et al. Conversion of polycarbosilane (PCS) to SiC-based ceramic Part 1. Characterisation of PCS and curing products. Journal of Materials Science, 4037(2001).

[20] Q YUAN, Y C SONG, Y Q LI et al. Synthesis and properties of a high ceramic yield thermosetting polycarbosilane. Silicone Material, 380(2011).

[21] Y H FANG, M H HUANG, Z Y YU et al. Synthesis, characterization and pyrolytic conversion of a novel liquid polycarbosilane. Journal of the American Ceramic Society, 3298(2008).

[22] R CABEZAS-RODRIGUEZ, D CIRIA, J MARTINEZ-FERNANDEZ et al. High temperature mechanical properties of polycrystalline Y₂SiO₅. Journal of the Spanish Ceramic and Glass Society, 60(2022).