A Research on Laser Cladding Co-Based Alloy to Repair Heat Resistant Steel of the Valves Used in Ultra-Super Critical Thermal Power Plants

Fuguang Liu; Yong Li; Erjuan Yang; Zihao Mi; Bo Wang; Gang Liu; Menghua Song; Haiou Yang

doi:10.3788/LOP202158.0514007

[1] Zhang Q M. Nuclear power valve parts design method[J]. Valve, 23-26(2013).

[2] Zhang J, Wu W N, Zhao L Z. Research progress and development trend of laser cladding[J]. Hot Working Technology, 42, 131-134,139(2013).

[3] Hu X Y. The surface modification research of laser cladding and N+ injection after cladding on nuclear valve sealing surface of Stellite 6 alloy[D](2015).

[4] Wei G Z, Wen S T, Li B Z et al. Study on microstructure and properties of repaired laser cladding on high-temperature forging mould for aeroengine pieces[J]. Hot Working Technology, 37, 29-31,34(2008).

[5] Liu S, Liu X B, Fu G Y et al. Development of laser cladding and application on nuclear valve sealing surfaces[J]. Materials Review, 23, 203-205(2009).

[6] Li Y N, Li Z G, Wang X X et al. Fe-based wear-resistant coating on railroad switch prepared using laser cladding technology and its properties[J]. Chinese Journal of Lasers, 47, 0402009(2020).

[7] Wang J S, Shu L S. Laser cladding remanufacturing and repair of agricultural tractor spindle[J]. Laser & Optoelectronics Progress, 57, 071404(2020).

[8] Wu Y, Liu Y, Chen H et al. Developing the ductility and thermal fatigue cracking property of laser-deposited Stellite 6 coatings by adding titanium and nickel[J]. Materials & Design, 162, 271-284(2019).

[9] Sun S, Durandet Y, Brandt M. Melt pool temperature and its effect on clad formation in pulsed Nd∶‍yttrium-aluminum-garnet laser cladding of Stellite 6[J]. Journal of Laser Applications, 19, 32-40(2007).

[10] Ren C, Li Z G, Shu D et al. Microstructure and water erosion resistance property of Stellite 6 coating by laser cladding on 17-4PH stainless steel surface[J]. Chinese Journal of Lasers, 44, 0402010(2017).

[11] Yu T, Zhang Z X, Rao X X et al. High-temperature wear behavior of laser-cladding Stellite 6 coating[J]. Laser & Optoelectronics Progress, 56, 141403(2019).

[12] Lima C R C, Belém M J X, Fals H D C et al. Wear and corrosion performance of Stellite 6® coatings applied by HVOF spraying and GTAW hotwire cladding[J]. Journal of Materials Processing Technology, 284, 116734(2020).

[13] Yi W, Chen H, Wu Y et al. Effect of in situ NbC on microstructure and wear properties of laser cladding Co-based coatings[J]. Chinese Journal of Lasers, 47, 0302010(2020).

[14] Xu J L, Zhou J Z, Tan W S et al. High-temperature oxidation resistance of Co-based alloy coatings by ultrasonic vibration assisted laser cladding[J]. Chinese Journal of Lasers, 46, 0102006(2019).

[15] Yan H, Chen Z F, Zhao J et al. Enhancing tribological properties of WS2/NbC/Co-based self-lubricating coating via laser texturing and laser cladding two-step process[J]. Journal of Materials Research and Technology, 9, 9907-9919(2020).

[16] Tang D, Wang J X. The application of cobalt base alloy on valve sealing face[J]. Valve, 19-22(2012).

[17] Zhang L J. Evaluation of bond characteristics between porcelain and titanium fabricated by laser rapid forming[D](2009).

[18] Wang X S, Yang G R, Song W M et al. Microstructure and bending behavior of Ni-Co/WC composite coatings on ZG45 steel deposited by vacuum sintering cladding[J]. Transactions of Materials and Heat Treatment, 37, 172-178(2016).

[19] Griffith M L, Ensz M T, Puskar J D et al. Understanding the microstructure and properties of components fabricated by laser engineered net shaping (LENS)[J]. MRS Online Proceedings Library, 625, 9-20(2000).

[20] Wang L, Felicelli S D, Craig J E. Experimental and numerical study of the LENS rapid fabrication process[J]. Journal of Manufacturing Science and Engineering, 131, 041019(2009).

[21] Li L, Sun F, Zhang Y C. Effect of solution treatment on the performance of laser cladding of Stellite 6 alloy coating[J]. Surface Technology, 46, 78-81(2017).

[22] Li Y M, Yang H O, Lin X et al. The influences of processing parameters on forming characterizations during laser rapid forming[J]. Materials Science and Engineering A, 360, 18-25(2003).