Laser Paint Removal Process Parameter Optimization via Response Surface Methodology

Jianian Yang; Jianzhong Zhou; Qi Sun; Xiankai Meng; Ming Zhu; Zhaoheng Guo; Qiang Fu

doi:10.3788/LOP56.231402

[1] Chillman A, Ramulu M, Hashish M. Waterjet and water-air jet surface processing of a titanium alloy: a parametric evaluation[J]. Journal of Manufacturing Science and Engineering, 132, 011012(2010).

[2] Ren G C, Yu F H, Chen H L. Present situation and development trend of green remanufacturing cleaning technology[J]. Machine Tool & Hydraulics, 42, 158-161(2014).

[3] Chen Y M, Zhou L Z, Yan F et al. Mechanism and quality evaluation of laser cleaning of aluminum alloy[J]. Chinese Journal of Lasers, 44, 1202005(2017).

[4] Shamsujjoha M, Agnew S R, Melia M A et al. Effects of laser ablation coating removal (LACR) on a steel substrate: surface profile, microstructure, hardness, and adhesion[J]. Surface and Coatings Technology, 281, 193-205(2015).

[5] Wang Z M, Zeng X Y, Huang W L. Parameters and mechanisms of laser cleaning rubber layer on a tyre mould[J]. Chinese Journal of Lasers, 27, 1050-1054(2000).

[6] Shi S D, Du P, Li W et al. Research on paint removal with 1064 nm quasi-continuous-wave laser[J]. Chinese Journal of Lasers, 39, 0903001(2012).

[7] Zhang H, Liu W W, Dong Y Z et al. Experimental and mechanism research on paint removal with low frequency YAG pulsed laser[J]. Laser & Optoelectronics Progress, 50, 121401(2013).

[8] Wang D L, Feng G Y, Deng G L et al. Study of mechanism on laser paint removal based on the morphology and element composition of ejected particle[J]. Chinese Journal of Lasers, 42, 1003007(2015).

[9] Li F, Chen X G, Lin W H et al. Nanosecond laser ablation of Al-Si coating on boron steel[J]. Surface and Coatings Technology, 319, 129-135(2017).

[10] Brygo F, Dutouquet C, Le Guern F et al. Laser fluence, repetition rate and pulse duration effects on paint ablation[J]. Applied Surface Science, 252, 2131-2138(2006).

[11] D'Addona D M. Genna S, Giordano A, et al. Laser ablation of primer during the welding process of iron plate for shipbuilding industry[J]. Procedia CIRP, 33, 464-469(2015).

[12] Jasim H A, Demir A G, Previtali B et al. Process development and monitoring in stripping of a highly transparent polymeric paint with ns-pulsed fiber laser[J]. Optics & Laser Technology, 93, 60-66(2017).

[13] Chen G X, Lu H F, Zhao Y et al. Effect of power on laser cleaning result of stainless steel surface[J]. Opto-Electronic Engineering, 44, 1217-1224, 1245(2017).

[14] Qiao Y L, Huang K N, Liang X B et al. Effect of laser cleaning speed on morphology and composition of carbon-deposited surface of titanium alloy[J]. Applied Laser, 37, 859-864(2017).

[15] Ruggiero A, Tricarico L, Olabi A G et al. Weld-bead profile and costs optimisation of the CO2 dissimilar laser welding process of low carbon steel and austenitic steel AISI316[J]. Optics & Laser Technology, 43, 82-90(2011).

[16] Olabi A G, Alsinani F O, Alabdulkarim A A et al. Optimizing the CO2 laser welding process for dissimilar materials[J]. Optics and Lasers in Engineering, 51, 832-839(2013).

[17] Li L, Zhang S, He Q et al. Application of response surface methodology in experiment design and optimization[J]. Research and Exploration in Laboratory, 34, 41-45(2015).

[18] Chu Z T, Yu Z S, Zhang P L et al. Weld profile prediction and process parameters optimization of T-joints of laser full penetration welding via response surface methodology[J]. Chinese Journal of Lasers, 42, 0203006(2015).