• Infrared and Laser Engineering
  • Vol. 47, Issue 4, 401001 (2018)
Xu Binshi1、*, Dong Shiyun1, Men Ping1、2, and Yan Shixing1
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    DOI: 10.3788/irla201847.0401001 Cite this Article
    Xu Binshi, Dong Shiyun, Men Ping, Yan Shixing. Quality characteristics and nondestructive test and evaluation technology for laser additive manufacturing alloy steel components (invited)[J]. Infrared and Laser Engineering, 2018, 47(4): 401001 Copy Citation Text show less
    References

    [1] Yang Yongqiang, Liu Yang, Song Changhui. The status and progress of manufacturing of metal parts by 3D printing technology[J]. Mechanical and Electrical Engineering Technology, 2013, 42(4): 1-7. (in Chinese)

    [2] Zhang Xuejun, Tang Siyi, Zhao Hengyue, et al. Research status and key technologies of 3D printing[J]. Journal of Materials Engineering, 2016, 44(2): 122-128. (in Chinese)

    [3] Li Huaixue, Sui Fan, Huang Baiying. Development and application of laser additive manufacturing for metal component [J]. Aeronautical Manufacturing Technology, 2012, 416(20): 26-31. (in Chinese)

    [4] Lu Bingheng, Li Dichen. Development of the additive manufacturing(3D printing) technology [J]. Machine Building & Automation, 2013, 42(4): 1-4. (in Chinese)

    [5] Huang Weidong. Laser Solid Forming[M]. Xi′an: Northwestern Polytechnical University Press, 2007. (in Chinese)

    [6] Kumar S. Selective laser sintering/melting [J]. Comprehensive Materials Processing, 2014, 26(3): 93-134.

    [7] Zhang Yuanliang, Zhang Hongchao, Zhao Jiaxu, et al. Review of non-destructive testing for remanufacturing of high-end equipment[J]. Journal of Mechanical Engineering, 2013, 49(7): 80-90. (in Chinese)

    [8] Xu Binshi, Dong Shiyun. Laser Remanufacturing Technology [M]. Beijing: National Defense Industry Press, 2016. (in Chinese)

    [9] Khairallah S A, Anderson A T, Rubenchik A, et al. Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones[J]. Acta Materialia, 2016, 108: 36-45.

    [10] Murr L E, Gaytan S M, Medina F, et al. Characterization of Ti-6Al-4V open cellular foams fabricated by additive manufacturing using electron beam melting[J]. Materials Science & Engineering A, 2010, 527(7-8): 1861-1868.

    [11] Yong H, Ming C L, Mazumder J, et al. Additive manufacturing: current state, future potential, gaps and needs, and recommendations [J]. Journal of Manufacturing Science & Engineering, 2015, 137(1): 014001.

    [12] Brown D W, Bernardin J D, Carpenter J S, et al. Neutron diffraction measurements of residual stress in additively manufactured stainless steel[J]. Materials Science & Engineering A, 2016, 678(15): 291-298.

    [13] Sander J, Hufenbach J, Giebeler L, et al. Microstructure and properties of FeCrMoVC tool steel produced by selective laser melting[J]. Materials & Design, 2016, 89(15): 335-341.

    [14] Gu D, Hong C, Jia Q, et al. Combined strengthening of multi-phase and graded interface in laser additive manufactured TiC/Inconel 718 composites[J]. Journal of Physics D Applied Physics, 2014, 47(4): 45309-45319.

    [15] Cox S C, Jamshidi P, Eisenstein N M, et al. Adding functionality with additive manufacturing: Fabrication of titanium-based antibiotic eluting implants [J]. Materials Science & Engineering C, 2016, 533(64): 407-415.

    [16] Kim T B, Yue S, Zhang Z, et al. Additive manufactured porous titanium structures: through-process quantification of pore and strut networks[J]. Journal of Materials Processing Technology, 2014, 214(11): 2706-2715.

    [17] Ibrahim K A, Wu B, Brandon N P. Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering[J]. Materials & Design, 2016, 106(15): 51-59.

    [18] Benedetti M, Cazzolli M, Fontanari V, et al. Fatigue limit of Ti6Al4V alloy produced by selective laser sintering[J]. Procedia Structural Integrity, 2016(2): 3158-3167.

    [19] Cerniglia D, Scafidi M, Pantano A, et al. Inspection of additive-manufactured layered components[J]. Ultrasonics, 2015, 62(7): 292-298.

    [20] Mengucci P, Barucca G, Gatto A, et al. Effects of thermal treatments on microstructure and mechanical properties of a Co-Cr-Mo-W biomedical alloy produced by laser sintering[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2016, 60(March): 106-117.

    [21] Li P. Constitutive and failure behaviour in selective laser melted stainless steel for microlattice structures [J]. Materials Science & Engineering A, 2015, 622(12): 114-120.

    [22] Sun Z, Tan X, Shu B T, et al. Selective laser melting of stainless steel 316L with low porosity and high build rates[J]. Materials & Design, 2016, 104(15): 197-204.

    [23] Baek S W, Song E J, Kim J H, et al. Hydrogen embrittlement of 3-D printing manufactured austenitic stainless steel part for hydrogen service [J]. Scripta Materialia, 2017, 130(15): 87-90.

    [24] Liu Bin. Ultrasonic and metal magnetic memory testing method for quality nondestructive evaluation of remanufacturing coating[D]. Harbin: Harbin Institute of Technology, 2013. (in Chinese)

    [25] American Society for Nondestructive Testing. American NDT Manual[M]. Beijing: World Book Publishing Company, 1999. (in Chinese)

    [26] Hu Mulin, Xie Changsheng, Huang Kaijin. Measurement of residual stress in multi-track laser-clad coating [J]. Laser Technology, 2006, 30(3): 262-264. (in Chinese)

    [27] Dong Shiyun, Yan Xiaoling, Xu Binshi. Influence of microstructure and residual stress on surface stress measurement of laser cladding layer by Rayleigh wave [J]. Journal of Mechanical Engineering, 2015, 51(24): 50-56. (in Chinese)

    [28] Liu Bin, Dong Shiyun. Stress measurement of laser cladding coating with critically refracted longitudinal wave method [J]. Transactions of the China Welding Institution, 2014, 35(9): 53-56. (in Chinese)

    [29] Liu B, Dong S. Stress evaluation of laser cladding coating with critically refracted longitudinal wave based on cross correlation function [J]. Applied Acoustics, 2016, 101(1): 98-103.

    [30] Ha■at G, Calmon P, Lasserre F. Application of ultrasonic modeling to the positioning of defects in a cladded component[C]//American Institute of Physics Conference Proceeding, 2004(2): 1.1711612.

    [31] Fang Yan, Chen Xichen. Research on key techniques of defect detection for laser remanufacturing [J]. Chinese Journal of Lasers, 2012, 39(4): 54-59. (in Chinese)

    [32] Yan Xiaoling. Numerical simulation and experimental study on ultrasonic testing for laser cladding [D]. Beijing: Beijing Institute of Technology, 2015. (in Chinese)

    [33] Liu Bin, Gong Kai, Qiao Yanxin, et al. Evaluation of influence of preset crack burial depth on stress of laser cladding coating with metal magnetic memory [J]. Acta Metallurgica Sinica, 2016, 52(2): 241-248. (in Chinese)

    [34] Dong Shiyun, Yan Shixing, Xu Binshi, et al. Laser cladding remanufacturing technology of cast iron cylinder head and its quality evaluation[J]. Journal of Academy of Armored Forces Engineering, 2013, 27(1): 90-93. (in Chinese)

    [35] Shi Changliang. Metal magnetic memory and ultrasonic complex method for damage degree evaluation of used ferromagnetic component before remanufacturing [D]. Harbin: Harbin Institute of Technology, 2011. (in Chinese)

    [36] Chinese Society for Nondestructive Testing. 2016 China NDT annual report[R]. Shanghai: Nondestructive Testing Editorial Department, 2016. (in Chinese)

    [37] Deng Ziyun, Ma Bing, Yi Yinghui, et al. Microstructure and properties of nickel-based super alloys valve by laser cladding remanufacturing [J]. Ordnance Material Science and Engineering, 2013, 36(3): 101-104. (in Chinese)

    [38] Wang Xiao, Shi Yiwei, Liang Jing, et al. The method for nondestructive testing additive manufacturing parts on line by laser ultrasonic: China, CN106018288A [P]. 2016-10-12. (in Chinese)

    [39] Men Ping, Dong Shiyun, Kang Xueliang, et al. Material early damage diagnosis with nonlinear ultrasound[J]. Chinese Journal of Scientific Instrument, 2017, 38(5): 1101-1118. (in Chinese)

    [40] Chen Yunpeng, Li Mangmang, Tang Chenglong. Progression of online detection technologies of mechanical property of cold-rolled strip steels [J]. Physical Testing and Chemical Analysis Part A: Physical Testing, 2017, 53(12): 859-865. (in Chinese)

    [41] Ukomski T, Stepinski T. Steel hardness evaluation based on ultrasound velocity measurements[J]. Insight-Non-Destructive Testing and Condition Monitoring, 2010, 52(11):592-596.

    [42] Freitas V L D A, Albuquerque V H C D, Silva E D M, et al. Nondestructive characterization of microstructures and determination of elastic properties in plain carbon steel using ultrasonic measurements[J]. Materials Science & Engineering A, 2010, 527(16): 4431-4437.

    [43] Rayes M M E, El-Danaf E A, Almajid A A. Ultrasonic characterization of heat-treatment effects on SAE-1040 and -4340 steels[J]. Journal of Materials Processing Tech, 2015, 216(2): 188-198.

    [44] Wiskel J B, Kennedy J, Ivey D G, et al. Ultrasonic velocity and attenuation measurements in l80 steel and their correlation with tensile properties[C]//19th World Conference on Non-Destructive Testing, 2016(7): 1-9.

    [45] Murthy G V S, Ghosh S, Das M, et al. Correlation between ultrasonic velocity and indentation-based mechanical properties with microstructure in Nimonic 263[J]. Materials Science & Engineering A, 2008, 488(1-2): 398-405.

    CLP Journals

    [1] Shi Tuo, Shen Ting, Li Dongsheng, Fu Geyan. Variable width scanning of variable wall thickness twisted blade with laser inside-beam powder feeding[J]. Infrared and Laser Engineering, 2019, 48(8): 805002

    Xu Binshi, Dong Shiyun, Men Ping, Yan Shixing. Quality characteristics and nondestructive test and evaluation technology for laser additive manufacturing alloy steel components (invited)[J]. Infrared and Laser Engineering, 2018, 47(4): 401001
    Download Citation