[1] Zhang X M, Hu S, Zhao Y R et al. Research progress of wear-resistant technology for the barrel and plunger of pumpjack. Oil Field Equipment, 48, 73-80(2019).
[2] Zheng L. Investigation on the friction and lubrication properties of bionic hexagonal-textured surface for pumpjack plunger(2018).
[3] Pang M, Tan W D. Effect of preheating temperature on residual stress field of laser melting RuT300 valve seats. Surface Technology, 48, 296-301(2019).
[4] Pang M, Zhang X H. Retardation of RuT300 end pit defects by laser melting. Surface Technology, 48, 131-138(2019).
[5] Kempen K, Vrancken B, Buls S et al. Selective laser melting of crack-free high density M2 high speed steel parts by baseplate preheating. Journal of Manufacturing Science and Engineering, 136, 061026(2014).
[6] Zaeh M F, Branner G. Investigations on residual stresses and deformations in selective laser melting. Production Engineering, 4, 35-45(2010).
[7] Yang J, Chen J, Yang H O et al. Experimental study on residual stress distribution of laser rapid forming process. Rare Metal Materials and Engineering, 33, 1304-1307(2004).
[8] Shi L K, Gao S Y, Xi M Z et al. Finite element simulation for laser direct depositing processes of metallic vertical thin wall parts Ⅰ. The simulation for temperature field during depositing processes. Acta Metallurgica Sinica, 42, 449-453(2006).
[9] Wang L F, Jiang X H, Zhu Y H et al. An approach to predict the residual stress and distortion during the selective laser melting of AlSi10Mg parts. The International Journal of Advanced Manufacturing Technology, 97, 3535-3546(2018).
[10] Bian H Y, Zhai Q X, Qu S et al. The evolution of temperature field and stress field in laser deposition repair GH4169 with substrate preheating. Applied Laser, 37, 327-332(2017).
[11] Pang M, Fu Y X. Numerical simulation study on asymmetric distribution of laser melting magnesium alloy pool. Hot Working Technology, 48, 110-113(2019).
[12] Li M Y, Han B, Cai C B et al. Numerical simulation on temperature and stress fields of laser cladded Ni-based coating. Transactions of the China Welding Institution, 36, 25-28, 32, 114(2015).
[13] Hu H W, Ding X P, Duan X M et al. Numerical study on selective laser melting thermal behavior of AlSi10Mg aluminum alloy. Hot Working Technology, 45, 53-57(2016).
[14] Pang M, Zhang X H, Fu W et al. Numerical simulation of laser melting temperature field of RuT300 valve seat. Hot Working Technology, 47, 117-123(2018).
[15] Liu X D, Jiang H L, Xie M. Analysis on residual stress of Q345 steel in laser cladding process. Heat Treatment of Metals, 45, 226-230(2020).
[16] Yu T B, Qiao R Z, Han J B et al. Residual stress numerical simulation of laser cladding on inclined substrate. Hot Working Technology, 49, 75-79(2020).
[17] Gong C, Wang L F, Zhu G X et al. Numerical simulation of residual stress in 316L stainless steel cladding layer by laser additive manufacturing. Applied Laser, 38, 402-408(2018).
[18] Gong C, Wang L F, Zhu G X et al. Influence of process parameters on the residual stress of cladding layers by laser additive manufacturing. Laser Technology, 43, 263-268(2019).
[19] Li G Q, Zhu G X, Zhao L et al. Numerical simulation on temperature field and stress field of cladding layer by hollow-ring laser. Surface Technology, 49, 319-328(2020).
[21] Ren Z H, Wu M P, Tang Y H et al. Numerical simulation and experimental research of laser cladding based on thermo-mechanical coupling. Laser & Optoelectronics Progress, 56, 051404(2019).
[22] Bian P Y, Yin E H. Effect of laser power for metal selective laser melting on morphology of 316L stainless steel molten pool and residual stress. Laser & Optoelectronics Progress, 57, 011403(2020).
[23] Pang M, Tan W D. Numerical simulation of stress field of laser phase transformation hardening vermicular graphite cast iron based on beam discretization. Laser & Optoelectronics Progress, 56, 231403(2019).