[1] Schattenburg M L, Chen C, Everett P N et al. Sub-100 nm metrology using interferometrically produced fiducials[J]. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 17, 2692-2697(1999). http://scitation.aip.org/content/avs/journal/jvstb/17/6/10.1116/1.591047
[2] Pati G S, Heilmann R K, Konkola P T et al. Generalized scanning beam interference lithography system for patterning gratings with variable period progressions[J]. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 20, 2617-2621(2002). http://scitation.aip.org/content/avs/journal/jvstb/20/6/10.1116/1.1520563
[3] Chen C G, Konkola P T, Heilmann R K et al. Nanometer-accurate grating fabrication with scanning beam interference lithography[C]. SPIE, 126-134(2002).
[4] Ferrera J, Schattenburg M L, Smith H I. Analysis of distortion in interferometric lithography[J]. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 14, 4009-4013(1996). http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=4968928
[5] Heilmann R K, Konkola P T, Chen C G et al. Digital heterodyne interference fringe control system[J]. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 19, 2342-2346(2001). http://scitation.aip.org/content/avs/journal/jvstb/19/6/10.1116/1.1410096
[6] Chen C G, Konkola P T, Heilmann R K et al. Image metrology and system controls for scanning beam interference lithography[J]. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 19, 2335-2341(2001). http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=4972123
[7] Jiang Shan, Pan Mingzhong et al. An accurate method for measuring interference fringe period in scanning beam interference lithography system[J]. Acta Optica Sinica, 35, 0705001(2015).
[8] Konkola P T. Design and analysis of a scanning beam interference lithography system for patterning gratings with nanometer-level distortions[D]. Berkeley: Massachusetts Institute of Technology(2003).
[9] Jiang Shan. Study on measurement and adjustment of interference fringe for scanning beam interference lithography system[D]. Beijing: University of Chinese Academy of Sciences(2015).
[10] Yang Kaiming. Studies on dynamic model and motion control of precision stage[D]. Beijing: Tsinghua University(2005).
[11] Yang Yibo. Identification & decoupling control system design for coarse-fine stages[D]. Beijing: Tsinghua University(2009).
[12] Butler H. Position control in lithographic equipment: an enabler for current-day chip manufacturing[J]. IEEE Control Systems Magazine, 31, 28-47(2011). http://www.ams.org/mathscinet-getitem?mr=2866934
[13] Chen C H, Yen J Y, Chen L S et al. Stitching technology using hybrid actuators in nano imprint[C]. New York: 2nd International Conference on Micro- and Nanosystems, 683-687(2008).
[14] Chen C G. Beam alignment and image metrology for scanning beam interference lithography: fabricating gratings with nanometer phase accuracy[D]. Berkeley: Massachusetts Institute of Technology(2003).
[15] Montoya J. Toward nano-accuracy in scanning beam interference lithography[D]. Berkeley: Massachusetts Institute of Technology(2006).
[16] Heertjes M, Hennekens D, Steinbuch M. MIMO feed-forward design in wafer scanners using a gradient approximation-based algorithm[J]. Control Engineering Practice, 18, 495-506(2010). http://www.sciencedirect.com/science/article/pii/S0967066110000146
[17] Mu Haihua, Zhou Yunfei, Zhou Yanhong. Coupling mechanism analysis and dynamic modeling for Lorentz motor motion control[J]. Proceedings of the CSEE, 29, 95-100(2009).