• Infrared and Laser Engineering
  • Vol. 49, Issue 2, 205009 (2020)
Chen Tian′en*, Wang Dong, and Liu Fengying
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3788/irla202049.0205009 Cite this Article
    Chen Tian′en, Wang Dong, Liu Fengying. Calibration method of MMS laser scanner using hybrid regular geometric surfaces[J]. Infrared and Laser Engineering, 2020, 49(2): 205009 Copy Citation Text show less
    References

    [1] Sun Liang, Xia Yonghua, Ma Xiaowei, et al. The application of vehicle-borne mobile mapping system in urban trees census[J]. Science of Surveying and Mapping, 2018, 43(3): 137-141. (in Chinese)

    [2] Liu Rufei, Lu Xiushan, Yue Guowei, et al. An automatic extraction method of road from vehicle-borne laser scanning point clouds[J]. Geomatics and Information Science of Wuhan University, 2017, 42(2):250-256. (in Chinese)

    [3] Gong Jianya, Cui Tingting, Shan Jie, et al. A survey on facade modeling using LiDAR point clouds and image sequences collected by mobile mapping systems[J].Geomatics and Information Science of Wuhan University, 2015, 40(9): 1137-1143. (in Chinese)

    [4] Wang Yonghong, Chen Hongqiang, Yang Xiaofeng, et al. Accuracy analysis of vehicle-borne mobile surveying system in municipal pipeline measurement[J].Bulletin of Surveying and Mapping, 2017(5): 82-84, 99. (in Chinese)

    [5] Lu Xiushan, Teng Teng, Liu Rufei. Mobile mapping,geographic information update urban management intelligence[J]. Acta Geodaetica et Cartographica Sinica, 2017, 46(10): 1592-1597. (in Chinese)

    [6] Petrie G. An introduction to the technology mobile mapping systems[J]. Goeinformatics, 2010, 13(1): 32-43.

    [7] Morgan D. Using mobile LiDAR to survey railway infrastructure. Lynx mobile mapper[C]//Proc FIG Comm, 2009, 5: 32–40.

    [8] Xue Wu, Zhang Yongsheng, Zhang Lijun, et al.Discussion on geometric calibration of mobile measurement system[J]. Science of Surveying and Mapping, 2015, 40(1): 68-71. (in Chinese)

    [9] Wang Li, Li Guangyun, Yang Xinyong, et al. One-site calibration of mounted parameter method for 3D mobile laser scanning[J]. Infrared and Laser Engineering,2016, 45(11): 1106005. (in Chinese)

    [10] Kang Yongwei, Zhong Ruofei, Wu Yu.Research of Calibrating vehicle laser scanner′s external parameters[J]. Infrared and Laser Engineering, 2008, 37(S1): 249-253. (in Chinese)

    [11] Bae K, Lichti D D. On-site self-calibration using planar targets for terrestrial laser scanners[J]. International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, 2007, 37 (Part 3/W52): 14-19.

    [12] Zhang Haixiao, Zhong Ruofei, Sun Haili. External parameter calibration method of vehicle laser scanning system based on planar features[J]. Acta Geodaetica et Cartographica Sinica, 2018, 47(12): 1640-1649. (in Chinese)

    [13] So E, Basso F, Menegatti E. Calibration of a rotating 2D laser range finder using point-plane Constraints[J].Journal of Automation, Mobile Robotics & Amp;Intelligent Systems, 2013, 7(2): 30-38.

    [15] Yao Lianbi, Wang Zhifei, Sun Haili. Design and implementation of vehicle laser scanner′s external parameter calibration[J]. Journal of Tongji University(Natural Science), 2016, 44(1): 161-166. (in Chinese)

    [16] Ting On Chara, Derek D Lichtia, David Belton. A rigorous cylinder-based self-calibration approach for terrestrial laser scanners[J]. ISPRS Journal of Photogrammetry and Remote Sensing, 2015, 99: 84-99.

    Chen Tian′en, Wang Dong, Liu Fengying. Calibration method of MMS laser scanner using hybrid regular geometric surfaces[J]. Infrared and Laser Engineering, 2020, 49(2): 205009
    Download Citation