Contents
2021
Volume: 36 Issue 7
14 Article(s)

Export citation format
RESEARCH ARTICLE
Microwave-assisted Synthesis and Co, Al Co-modification of Ni-rich LiNi0.8Mn0.2O2 Materials for Li-ion Battery Electrode
Yukun FU, Min ZENG, Xianfa RAO, Shengwen ZHONG, Huijuan ZHANG, and Wenli YAO
Journal of Inorganic Materials
  • Publication Date: Jul. 20, 2021
  • Vol. 36, Issue 7, 718 (2021)
Preparation and Catalytic Properties of Graphene-Bismuth Ferrite Nanocrystal Nanocomposite
Tie LI, Yue LI, Yingyi WANG, and Ting ZHANG
BiFeO3 (BFO) is a novel recyclable photocatalyst which benefits from its appropriate theoretical band gap and room temperature ferromagnetism, yet the relatively high recombination rate of photogenerated electron-hole pairs and low quantum yield limit its practical catalytic performance. Here, a composite material of r
Journal of Inorganic Materials
  • Publication Date: Jul. 20, 2021
  • Vol. 36, Issue 7, 725 (2021)
Pre-crack and Fracture Toughness Evaluation of Ceramic Thin Plates
Delong MA, Yiwang BAO, Detian WAN, Yan QIU, Dezhi ZHENG, and Shuai FU
Controllable length of pre-crack and in-situ observation are two major difficulties in the research of fracture resistance of ceramic materials. In this study, a method of strain-induced cracking was proposed, in which the plate was bonded to a brass beam to form a composite. The bending deformation of brass beam deriv
Journal of Inorganic Materials
  • Publication Date: Jul. 20, 2021
  • Vol. 36, Issue 7, 733 (2021)
Mo Doped Cuprorivaite: Preparation, Antibacterial and Cytocompatibility
Endian WANG, and Jiang CHANG
Copper-containing biomaterials have excellent inhibitory effect on bacteria growth by releasing copper ions at high concentration, which may have cytotoxicity at the same time. Although low concentration of copper ions has good cytocompatibility, the antibacterial activity is unsatisfactory. Therefore, it is of great s
Journal of Inorganic Materials
  • Publication Date: Jul. 20, 2021
  • Vol. 36, Issue 7, 738 (2021)
Different Simulated Body Fluid on Mineralization of Borosilicate Bioactive Glass-based Bone Cement
Ziyang LIN, Yuchen CHANG, Zhangfan WU, Rong BAO, Wenqing LIN, and Deping WANG
Journal of Inorganic Materials
  • Publication Date: Jul. 20, 2021
  • Vol. 36, Issue 7, 745 (2021)
Mineralization Activity of Li2Ca2Si2O7 Bioceramics
Hongyi XU, Dong ZHAI, Wanting CAO, Zhenhua CHEN, Wenhao QIAN, and Lei CHEN
How to effectively treat periodontitis and achieve regeneration of damaged periodontal tissue has always been a challenging problem in the treatment of periodontal diseases, and mineralization is one of the key factors in the normal periodontal development and function. The aim of this study was to investigate the effe
Journal of Inorganic Materials
  • Publication Date: Jul. 20, 2021
  • Vol. 36, Issue 7, 753 (2021)
RESEARCH LETTER
Growth of High-quality Yb3+-doped Y3Al5O12 Single Crystal Fiber by Laser Heated Pedestal Growth Method
Yun DAI, Zhonghan ZHANG, Liangbi SU, Jin LI, Yong LONG, Yuchong DING, and Anhua WU
Single-crystal fiber (SCF) is a fiber-shaped monocrystalline material, which is an important tendency for the development of low-dimensional functional crystals. Combining the excellent optical properties of bulk crystals and the high-efficient thermal dissipation as well as the high beam quality of optical fibers, SCF
Journal of Inorganic Materials
  • Publication Date: Jul. 20, 2021
  • Vol. 36, Issue 7, 761 (2021)
Tuning Nitrogen Species and Content in Carbon Materials through Constructing Variable Structures for Supercapacitors
Peng SUN, Shaoning ZHANG, Hui BI, Wujie DONG, and Fuqiang HUANG
Carbon materials are favorable for supercapacitors but suffer from insufficient capacitance. Heteroatom doping, especially nitrogen (N) doping, is an effective method to significantly improve the electrochemical performance, but it is still a big challenge to achieve high active nitrogen content in carbon materials. Th
Journal of Inorganic Materials
  • Publication Date: Jul. 20, 2021
  • Vol. 36, Issue 7, 766 (2021)
Molten Salt Synthesis of Nanolaminated Sc2SnC MAX Phase
Youbing LI, Yanqing QIN, Ke CHEN, Lu CHEN, Xiao ZHANG, Haoming DING, Mian LI, Yiming ZHANG, Shiyu DU, Zhifang CHAI, and Qing HUANG
The MAX phases are a family of ternary layered material with both metal and ceramic properties, and it is also precursor materials for synthesis of two-dimensional MXenes. The theory predicts that there are more than 600 kinds of stable ternary layered MAX phase materials. Now, more than 80 kinds of ternary layered MAX
Journal of Inorganic Materials
  • Publication Date: Jul. 20, 2021
  • Vol. 36, Issue 7, 773 (2021)
Electronic Property of PdSe2 Thin Films Fabricated by Post-selenization of Pd Films
Hui WANG, Shujuan ZHANG, Tingwei CHEN, Chuanlin ZHANG, Haosu LUO, and Renkui ZHENG
At present, the approaches to fabricate PdSe2 thin films mainly focus on mechanical exfoliation and chemical vapor deposition. In this study, we report a simple and efficient method to fabricate PdSe2 thin films on SiO2/Si substrates. Firstly, a Pd metal layer was deposited on a SiO2/Si substrate using magnetron sputte
Journal of Inorganic Materials
  • Publication Date: Jul. 20, 2021
  • Vol. 36, Issue 7, 779 (2021)
REVIEW
Research Progress on Alumina Aerogel Composites for High-temperature Thermal Insulation
Fei PENG, Yonggang JIANG, Jian FENG, Huafei CAI, Junzong FENG, and Liangjun LI
As a nano-porous material with high porosity, low density, high specific surface area, excellent heat-resistance, and low thermal conductivity, the alumina aerogel shows broad application prospect in high-temperature thermal insulating areas such as the thermal protective system for space vehicles and the thermal insul
Journal of Inorganic Materials
  • Publication Date: Jul. 20, 2021
  • Vol. 36, Issue 7, 673 (2021)
Research Progress on the Preparation and Characterization of Ultra Refractory TaxHf1-xC Solid Solution Ceramics
Peng XIAO, Yulin ZHU, Song WANG, Yiping YU, and Hao LI
TaxHf1-xC(0 4000 K), high hardness (~ 30 GPa), low coefficient of thermal expansion, excellent oxidation resistance, and excellent ablation resistance. Over the past decades, some extreme conditions required for aerospace industry have greatly promoted the development of TaxHf1-xC materials, and dozens of literatures w
Journal of Inorganic Materials
  • Publication Date: Jul. 20, 2021
  • Vol. 36, Issue 7, 685 (2021)
Research Progress of Biomimetic Self-assembly of Nanomaterials in Morphology and Performance Control
Huaxin LI, Junyong CHEN, Zhou XIAO, Xian YUE, Xianbo YU, and Junhui XIANG
Nano materials exhibit many excellent properties compared with macro scale materials due to their special properties at nanoscale. They exhibit good application prospects in various fields such as mechanics, acoustics, optics, magnetism, electricity, thermology and so on. In this fascinating field, biomimetic self-asse
Journal of Inorganic Materials
  • Publication Date: Jul. 20, 2021
  • Vol. 36, Issue 7, 695 (2021)