Multilayer-DLC film with low inner-stress prepared by pulsed laser deposition

Lu Yimin; Guo Yanlong; Huang Guojun; Li Wei; Wan Qiang; Tang Huang

doi:10.3788/irla201746.0921001

[1] Cheng Yong, Guo Yanlong, Wang Shuyun, et al. Optical app-lication of diamond like carbon film deposited on Si substrate by pulsed laser[J]. Infrared and Laser Engineering, 2010, 39(5): 875-878. (in Chinese)

[2] Guo Yanlong, Wang Shuyun, Wang Xiaobing, et al. Pulsed laser deposition of diamond-like carbon films[J]. Laser & Optoelectronics Progress, 2008, 45(3): 32-37. (in Chinese)

[3] Roger Jagdish Narayan. Laser processing of diamond-like carbon–metal composites[J]. Applied Surface Science, 2005, 245: 420-430.

[4] Bonis A De, Rau J V, Santagata A, et al. Diamond-like carbon thin films produced by femtosecond pulsed laser deposition of fullerite[J]. Surface and Coatings Technology, 2011, 205: 3747-3753.

[5] Xue Qunji, Wang Liping. Thin Film Materials of Carbon-base DLC[M]. Beijing: Science Press, 2012. (in Chinese)

[6] Camargo S S Jr, Gomes R A, Baia Neto A L. Structural modifications and temperature stability of silicon incorporated diamond-like a-C:H films[J]. Thin Solid Films, 1998, 332(1-2): 130-135.

[7] Cheng Yong, Wang Huisheng, Guo Yanlong, et al. Anti-reflective and protective diamond-like carbon films on infrared windows deposited by femtosecond pulsed laser[J]. Infrared and Laser Engineering, 2011, 40(12): 2403-2406. (in Chinese)

[8] Wang Xuemin, Wu Weidong, Li Shengyin, et al. Properties of W doped diamond—like carbon films prepared by pulsed laser deposition[J]. Rare Metal Materials and Engineering, 2010, 39(7): 1251-1255. (in Chinese)

[9] Kleinsorge B, Ferrari A C, Roberson J. Influence of nitrogen and temperature on the deposition of tetrahedrally bonded amorphous carbon[J]. J Appl Phy, 2000, 88(7): 1149-1157.

[10] Goncharov V, Gusakov G, Puzyerev M, et al. Pulsed laser deposition of diamond-like amorphous carbon films from different carbon targets[J]. Publ Astron Obs Belgrade, 2010, 89(1): 125-129.

[11] Cheng Yong, Wang Shuyun, Guo Yanlong, et al. Research of diamond-like carbon film deposited by pulsed laser.[J]. Optics & Optoelectronic Technology, 2011, 9(3): 51-55. (in Chinese)

[12] Camargo S S Jr, Gomes R A, Carrapichano J M. Silicon-incorporated diamond-like coatings for Si3N4 mechanical seals[J]. Thin Solid Films, 2005, 482(1-2): 221-225.

[13] Zhang Jinping, Zeng Tixian, Chen Taihong. Study of hardness and residual stress of α-DLC film fabricated by PLD[J]. Journal of Xihua University (Natural Science), 2009, 28(1): 83-87.

[14] Zhang Duanming, Zhao Xiujian, Li Zhihua, et al. Pulsed Laser Deposition Dynamics and Thin Film Deposition onto Glass[M]. Wuhan: Hubei Science Press, 2003. (in Chinese)

[15] Tang Jilong, Fu Xinhua. Influenceson properties of DLC coatings by H2 content[J]. Journal of Changchun University of Scienceand Technology (Natural Science Edition), 2013, 36(6): 97-100. (in Chinese)

[16] Wu Jinlong, Zhou Hui, Zheng Jun, et al. Effects of flow ratio of H2 and CH4 on structure and friction properties of hydrogen diamond-like carbon films[J]. China Surface Engineering, 2015, 28(1): 142-146. (in Chinese)

[17] Zhou Shengguo, Liu Zhengbing, Liu Long, et al. Influence of sputtering power on the structure and performance of diamond-like carbon films[J]. Superhard Material Engineering, 2015, 27(4): 124-127. (in Chinese)

[18] Sha Chunsheng, Li Rongbin, Song Xiaohang, et al. Tribological properties of diamond-like-carbon coatings lubricated with vacuum grease in space environment[J]. Chinese Journal of Vacuum Science and Technology, 2016, 36(2): 312-316. (in Chinese)

[19] Wan Qiang, Lu Yimin, Mi Chaowei, et al. Research on anti-reflective and protective diamond-like carbon film deposited by 248 nm nanosecond laser[J]. Laser & Optoelectronics Progress, 2015, 52(9): 093101. (in Chinese)

[20] Marvin J Weber. Handbook of Optical Materials[M]. New York: CRC Press, 2003.