Calibration method of circumference receiver based on circumference constraint location method

Wang Xiaoleng; Yang Linghui; Lin Jiarui; Ren Yongjie; Yin Tong

doi:10.3788/irla201645.0717004

[1] Yang Linghui, Yang Xueyou, Lao Dabao, et al. Large-scale coordinates measurement method based on intersection of optical planes[J]. Infrared and Laser Engineering, 2010, 39(6): 1105-1109. (in Chinese)

[2] Duanmu Qiong, Yang Xueyou, Zhu Jigui, et al. 3D coordinate measurement system based on optoelectronic scanning[J]. Infrared and Laser Engineering, 2011, 40(10): 2014-2019. (in Chinese)

[3] Yang Linghui, Zhu Jigui, Wei Zhenzhong, et al. Correction method for orientation parameters of workspace measurement positioning system [J]. Infrared and Laser Engineering, 2012, 41(6): 1629-1634. (in Chinese)

[4] Ye Shenghua, Zhu Jigui, Zhang Zili, et al. Status and development of large-scale coordinate measurement research[J]． Acta Metrologica Sinica, 2008, 29(4A): 1-6. (in Chinese)

[5] Yang Linghui. Research on large-scale space coordinate measurement location technology based on optical scanning[D]. Tianjin: Tianjin University, 2010. (in Chinese)

[6] Liu Zhexu. Research on measurement and positioning method in large complex field[D]. Tianjin: Tianjin University, 2014. (in Chinese)

[7] Muelaner J E, Wang Z, Jamshidi J. Uncertainty of angle measurement for a rotary-laser automatic theodolite(R-LAT)[J]． Engineering Manufacture, 2008, 223(B3): 217-229.

[8] Xiong Z, Zhu J, Zhao Z, et al. Workspace measuring and positioning system based on rotating laser planes[J]. Mechanika, 2012, 18(1): 94-98.

[9] Yang Linghui, Yang Xueyou, Zhu Jigui, et al. Novel method for spatial angle measurement based on rotating planar laser beams[J]. Chinese Journal of Mechanical Engineering, 2010, 23(6): 758-764.

[10] Lao Dabao, Yang Xueyou, Zhu Jigui, et al. Study on calibration technology of network laser scan space positioning system[J]. Journal of Mechanical Engineering, 2011, 47(6): 1-6. (in Chinese)

[11] Yang Linghui, Zhu Jigui, Zhang Guangjun, et al. Orientation method for workspace measurement positioning system based on scale bar[J]. Journal of Tianjin University, 2012, 45(9): 814-819. (in Chinese)

[12] Lao D B, Yang X Y, Zhu J G, et al. 2011 Optimization of calibration method for scanning planar laser coordinate measurement system[J]. Opt Precision Eng, 2011, 19(4): 870-877.

[13] Maisano D A, Jamshidi J, Franceschini F, et al. Indoor GPS:system functionality and initial performance evaluation[J]. International Journal of Manufacturing Research, 2008, 3(3): 335-349.