• Opto-Electronic Engineering
  • Vol. 35, Issue 8, 24 (2008)
LI Zhi-bin1、2、*, ZHENG Gang1, ZHANG Li-xin3, and XIA Fei2
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • show less
    DOI: Cite this Article
    LI Zhi-bin, ZHENG Gang, ZHANG Li-xin, XIA Fei. Influence of Some Parameters for Particle Diameter Measurement Using Digital in-line Holography[J]. Opto-Electronic Engineering, 2008, 35(8): 24 Copy Citation Text show less
    References

    [1] Yamaguchi I.Phase-shifting digital holography[J].Opt.Lett,1997,22(16):1268-1270

    [2] ZHANG T,Yamaduchi I.Three-dimensional microscopy with phase-shifting digital holography[J].Opt.Lett,1998,23(15):1221-1223

    [3] Dirksen D,Droste H,Kemper B,et al.Lensless Fourier holography for digital holographic interferometry on biological samples[J].Opt.Laser Eng,2001,36(3):241-249

    [4] Frauel Y,Javidi B.Neural network for three-dimensional object recognition object recognition based on digital holography[J].Opt.Lett,2001,26(19):1478-1480

    [5] Kreis T,Adams M,Jüptner W.Digital in-line holography in particle measurement[J].SPIE,1999,3744:54-64

    [6] Hung M Y Y,Lin L,Shang H M.Simple method for direct determination of bending strains by use of digital holography[J].Appl.Opt,2001,40(25):4514-4518

    CLP Journals

    [1] LI Zhi-bin, ZHENG Gang, ZHANG Li-xin, LIU Gang. Accurate Axial Location for Particles in Digital In-line Holography[J]. Opto-Electronic Engineering, 2009, 36(9): 82

    LI Zhi-bin, ZHENG Gang, ZHANG Li-xin, XIA Fei. Influence of Some Parameters for Particle Diameter Measurement Using Digital in-line Holography[J]. Opto-Electronic Engineering, 2008, 35(8): 24
    Download Citation