[1] Gnanamuthu D S. Laser surface treatment[J]. Optical Engineering, 1980, 19(5): 195783
[2] Vaithilingam J, Goodridge R D, Haguer J M, et al. The effect of laser remelting on the surface chemistry of Ti6AL4V components fabricated by selective laser melting[J]. Journal of Materials Processing Technology, 2016, 232(9): 1-8.
[3] Lu Yunlong, Zhang Peilei, Ma Kai, et al. Microstructure and properties of laser alloying Ni-W-Si composite coating[J]. Rare Metal Materials and Engineering, 2016, 45(2): 375-380.
[4] Yue L Y, Wang Z B, Li L. Modeling and simulation of laser cleaning of tapered micro-slots with different temporal pulses[J]. Optics & Laser Technology, 2013, 45(2): 533-539.
[5] Arias-González F, del Val J, Comesaa R, et al. Fiber laser cladding of nickel-based alloy on cast iron[J]. Applied Surface Science, 2015, 374: 197-205.
[6] Sheng J, Huang S, Zhou J Z, et al. Effect of laser peening with different energies on fatigue fracture evolution of 6061-T6 aluminum alloy[J]. Optics & Laser Technology, 2016, 77: 169-176.
[7] Zhou Jianzhong, Xu Zengchuang, Huang Shu, et al. Effects of different stress ratios on fatigue crack growth in laser shot peened 6061-T6 aluminum alloy[J]. Chinese J Lasers, 2011, 38(9): 0903006.
[8] Gencalp Irizalp S, Saklakoglu N. High strength and high ductility behavior of 6061-T6 alloy after laser shock processing[J]. Optics & Lasers in Engineering, 2016, 77: 183-190.
[9] Ren X D, Huang J J, Zhou W F, et al. Surface nano-crystallization of AZ91D magnesium alloy induced by laser shock processing[J]. Materials & Design, 2015, 86: 421-426.
[10] Zhang Y, You J, Lu J, et al. Effects of laser shock processing on stress corrosion cracking susceptibility of AZ31B magnesium alloy[J]. Surface & Coatings Technology, 2010, 204(24): 3947-3953.
[11] Zhang X C, Zhang Y K, Lu J Z, et al. Improvement of fatigue life of Ti-6Al-4V alloy by laser shock peening[J]. Materials Science & Engineering A, 2010, 527(15): 3411-3415.
[12] Correa C, Gil-Santos A, Porro J A, et al. Eigenstrain simulation of residual stresses induced by laser shock processing in a Ti6Al4V hip replacement[J]. Materials & Design, 2015, 79: 106-114.
[13] Luo K Y, Lu J Z, Zhang Y K, et al. Effects of laser shock processing on mechanical properties and micro-structure of ANSI 304 austenitic stainless steel[J]. Materials Science & Engineering A, 2011, 528(13-14): 4783-4788.
[14] Lu J Z, Luo K Y, Zhang Y K, et al. Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel[J]. Acta Materialia, 2010, 58(16): 5354-5362.
[15] Zhou Z, Gill A S, Telang A, et al. Experimental and finite element simulation study of thermal relaxation of residual stresses in laser shock peened IN718 SPF superalloy[J]. Experimental Mechanics, 2014, 54(9): 1597-1611.
[16] Gill A S, Telang A, Vasudevan V K. Characteristics of surface layers formed on Inconel 718 by laser shock peening with and without a protective coating[J]. Journal of Materials Processing Technology, 2015, 225: 463-472.
[17] Zhang Haifeng, Huang Shu, Sheng Jie, et al. Thermal relaxation of residual stress and grain evolution in laser peening IN718 alloy[J]. Chinese J Lasers, 2016, 43(2): 0203008.
[18] Denda T, Kikuchi H, Teramoto T, et al. Effect of grain size on fatigue life and fatigue crack growth mechanism of IN718[J]. Transactions of the Japan Society of Mechanical Engineers, 1994, 60(576): 1746-1752.
[19] Li Meijuan, Hu Haiyun, Xing Xiusan. The relationship between fatigue life and grain size of polycrystalline metals[J]. Acta Physica Sinica, 2003, 52(8): 2092-2095.
[20] Hattori H, Kitagawa M, Ohtomo A. Effect of grain size on high temperature low-cycle fatigue properties of Inconel 617[J]. Journal of the Iron and Steel Institute of Japan, 1982, 68(16): 2521-2530.
[21] Hammersley G, Hackel L A, Harris F. Surface prestressing to improve fatigue strength of components by laser shot peening[J]. Optics & Lasers in Engineering, 2000, 34(4-6): 327-337.
[22] Zhuang W Z, Halford G R. Investigation of residual stress relaxation under cyclic load[J]. International Journal of Fatigue, 2001, 23(s1): 31-37.
[23] Lu J Z, Luo K Y, Zhang Y K, et al. Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts[J]. Acta Materialia, 2010, 58(11): 3984-3994.
[24] Sadananda K, Shahinian P. Review of the fracture mechanics approach to creep crack growth in structural alloys[J]. Engineering Fracture Mechanics, 1981, 15(3-4): 327-342.
[25] Dong Shizhu. Study of subgrain evolution under fatigue[J]. Machinery Design & Manufacture, 1995(6): 46-47.