[2] Liu Ximing. Laser technology application[J]. Chinese J. Lasers, 1999, A26(5): 470~476
[4] Yang Sen, Zhong Minlin, Zhang Qingmao et al.. New techniques to rapidly manufacture metal parts with laser[J]. Laser Technology, 2001, 25(4): 254~258
[5] Yang Jialin, Wang Yang, Chen Yang. Research present condition and growth trends of rapid prototyping[J]. New Technology & New Process, 2003, 1(11): 28~35
[6] Li Peng. Reserch on Laser Direct Manufacturing Technology Base on Laser Cladding Three-Dimensional Metal Parts [D]. Wuhan: Huazhong University of Science and Technology, 2005. 50~70
[7] Zhong Minlin, Ning Guoqing, Liu Wenjin et al.. Fundamental aspects on laser rapid & flexible manufacturing of metallic components[J]. Applied Laser, 2001, 21(2): 76~80
[8] Zhang Yongzhong, Zhang Pingzhi. Research on laser direct forming of metal parts[J]. Materials Review, 2001, 15(12): 15~20
[9] Zhang Yongzhong, Shi Likai, Zhang Pingzhi et al.. The newest advance in laser rapid forming of metallic powders[J]. Rare Metal Materials and Engineering, 2000, 29(6): 361~364
[10] Li Lun, Liu Weijun, Shang Xiaofeng. Direct metal deposition based on revolving surface[J]. J. Basic Science and Engineering, 2008, 16(4): 616~626
[11] Wang Jiajin. Laser Processing Techniques[M].Beijing: Chinese Metrology Press, 1992. 50~60
[12] Wang Anjun. Study on the Device and Process of Inside-Laser Coaxial Powder Feeding Cladding and Rapid Prototyping Process of Laser [D]. Suzhou: Soochow University, 2007. 41~60
[13] Peng Shanfei. The Influence of Inside-Laser Coaxial Powder Feeding Technology Parameter on Forming under the Action of Annular Facula [D]. Suzhou: Soochow University, 2008. 13~20
[14] Cui Hongwu. Study on the Coupling of Laser Beam and Powder and High-Level Accumulate Technology Based on Inside-Laser Coaxial Power Feeding [D]. Suzhou: Soochow University, 2009, 15~20
[15] Wang Haibo. Study on Storey Dynamic Control of Laser 3D Deposition Process Based on PMAC[D]. Suzhou: Soochow University, 2009. 5~15