Three-dimensional Reconstruction and Porosity Calculation of Ceramic Coating: Nondestructive X-ray Computed Tomography

Zhifeng ZHANG; Fengjuan WANG; Shengping WU; Jinyang JIANG

doi:10.15541/jim20190534

[1] J YANG J, R HAI, R WU K. Effect of ettringite structural transformation on expansive behavior of expansion cement. Journal of Inorganic Materials, 18, 136-142(2003).

[2] L LÜ J, J JIN H, X LIANG T. The effect of electrochemical nitridationon the corrosion resistance of the passive films formed on the 2205 duplex stainless steel. Materials Letters, 256, 1-4(2019).

[3] P ZHAO Y, Y LIU, Q LIU. Icephobicity studies of superhydrophobic coatings on concrete via spray method. Materials Letters, 233, 263-266(2018).

[4] S WANG P. Study on Preparation and Critical Properties of a New Type of Steel Bars Coated with Micro/Nano Ceramics. Nanjing: Master Thesis of Southeast University(2016).

[5] F ZHANG Z, J WANG F, Y LIU. Molecule adsorption and corrosion mechanism of steel under protection of inhibitor in a simulated concrete solution with 3.5% NaCl. RSC Advances, 8, 20648(2018).

[6] Y JIANG J, Y CHU H, YAO LIU. Galvanic corrosion of duplex corrosion-resistant steel rebars under carbonated concrete conditions. RSC Advances, 8, 16626(2018).

[7] Y WEI Q, T WANG X, B NING X. Characteristics and anticorrosion performance of WSe₂/TiO₂ nanocomposite materials for 304 stainless steel. Surface and Coatings Technology, 352, 26-32(2018).

[8] J TANG F, D CHEN G, K BROWN R. Corrosion resistance and mechanism of steel rebar coated with three types of enamel. Corrosion Science, 59, 157-168(2012).

[9] D CUI, N BANTHIA, N WANG Q. Investigation on porosity of partly carbonated paste specimens blended with fly ash through dual CT scans. Construction and Building Materials, 196, 692-702(2019).

[10] B LUBELLI, M WINTER D A, A POST J. Cryo-FIB-SEM and MIP study of porosity and pore size distribution of bentonite and kaolin at different moisture contents. Applied Clay Science, 358-365(2013).

[11] F COLLINGWOOD J, F ADAMS. Chemical imaging analysis of the brain with X-ray methods. Spectrochimica Acta Part B: Atomic Spectroscopy, 130, 101-118(2017).

[12] P HERMANEK, S CARMIGNATO. Porosity measurements by X-ray computed tomography: accuracy evaluation using a calibrated object. Precision Engineering, 49, 377-387(2017).

[13] L YANG, S ZHANG Y, Y LIU Z et al. In-situ tracking of water transport in cement paste using X-ray computed tomography combined with CsCl enhancing. Materials Letters, 160, 381-383(2015).

[14] W ZHU, N CAI X, L YANG. The evolution of pores in thermal barrier coatings under volcanic ash corrosion using X-ray computed tomography. Surface and Coatings Technology, 357, 372-378(2019).

[15] F ZHENG Y, L ZHANG L, K WANG. Microstructure characterization and luminescent property of mixed spinel Zn₆Ga₈TiO₂₀:Cr³⁺ phosphors. Journal of Inorganic Materials, 33, 9-13(2018).

[16] T LI Y, L CHEN, L GUO Y et al. Preparation and characterization of WO₃/TiO₂ hollow microsphere composites with catalytic activity in dark. Chemical Engineering Journal, 734-739(2012).

[17] F ZHANG X, H ZHANG G, Y MENG. Photocatalytic degradation of methylene blue by schiff-base cobalt modified CoCr layered double hydroxides. Journal of Inorganic Materials, 34, 974-982(2019).

[18] S WAN K, G LI, H WANG S. 3D full field study of drying shrinkage of foam concrete. Cement and Concrete Composite, 82, 217-226(2017).

[19] Y ZHANG Z, X SANG L, P LU L. Preparation of TiO₂ nanotube arrays and their photoelectrochemical properties. Journal of Inorganic Materials, 25, 1145-1149(2010).

[20] H KANG S, G HONG S, J MOON. The effect of superabsorbent polymer on various scale of pore structure in ultra-high performance concrete. Construction and Building Materials, 172, 29-40(2018).