Fiber Fabry-Perot Demodulation System Based on Dual Fizeau Interferometers

Deyi KONG; Zengyu SONG; Ning WANG; Zhiqi WANG; Peijian HUANG; Yong ZHU; and Jie ZHANG

doi:10.1007/s13320-022-0670-9

[1] S. C. Shen, J. Lei, and X. L. Hao, “A method for detecting the surge of an aero-engine compressor,” Journal of Air Force Engineering University (Natural Science Edition), 2020, 21(4): 1-6.

[2] H. P. Phan, D. V. Dao, K. Nakamura, S. Dimitrijev, and N. Nguyen, “The piezoresistive effect of SiC for MEMS sensors at high temperatures: a review,” Journal of Microelectromechanical Systems, 2015, 24(6): 1663-1677.

[3] Q. X. Yu, and X. L. Zhou, “Pressure sensor based on the fiber-optic extrinsic Fabry-Perot interferometer,” Photonic Sensors, 2011, 1(1): 72-83.

[4] Y. C. Liu, Z. G. Shen, Z. F. Shi, J. C. Yuan, and B. O. Nan, “Study on fiber optic pressure high-speed demodulation based on micro-spectrometer,” Navigation Positioning & Timing, 2017, 4(4): 103-108.

[5] J. J. Tian, Q. Zhang, T. Fink, H. Li, W. Peng, and M. Han, “Tuning operating point of extrinsic Fabry-Perot interferometric fiber-optic sensors using microstructured fiber and gas pressure,” Optics Letters, 2012, 37(22): 4672-4674.

[6] A. Wang, H. Xiao, J. Wang, Z. Wang, W. Zhao, and R. G. May, “Self-calibrated interferometricintensity-based optical fiber sensors,” Journal of Lightwave Technology, 2001, 19(10): 1495-1501.

[7] K. A. Murphy, M. F. Gunther, A. M. Vengsarkar, and R. O. Claus, “Quadrature phase-shifted, extrinsic Fabry-Perot optical fiber sensors,” Optics Letters, 1991, 16(4): 273-275.

[8] W. M. Chen, N. Wang, Y. Zhu, Y. M. Fu, J. Y. Sun, and S. L. Huang, “Experimental study on the affection of Gaussian spectrum of light source on the optical fiber F-P strain sensor,” Chinese Journal of Lasers, 2003, 30(1): 88-92.

[9] Y. Jiang, “Fourier transform white-light interferometry for the measurement of fiber-optic extrinsic Fabry-Perot interferometric sensors,” IEEE Photonics Technology Letters, 2008, 20(2): 75-77.

[10] J. Y. Sun, W. M. Chen, Y. Zhu, and S. L. Huang. “An optic fiber Fabry Perot strain sensor system based on tunable Fabry Perot,” Laser Journal, 2002, 23(4): 49-50.

[11] J. D. Yin, C. M. Zhou, Y. W. Ou, and M. M. Li, “Combined algorithm of Fibonacci-MMSE for optical fiber Fabry-Perot sensor,” Acta Physica Sinica, 2015, 44(9): 168-173.

[12] B. L. Zhang, X. L. Tong, P. Hu, Q. Guo, Z. Y. Zheng, and C. R. Zhou, “Wavelet phase extracting demodulation algorithm based on scale factor for optical fiber Fabry-Perot sensing,” Optics Express, 2016, 24(26): 29506-29511.

[13] J. S. Li, Y. Zhu, N. Wang, and J. N. Li. “An algorithm for improving the signal stability of the fast fiber optic Fabry-Perot nonscanning correlation demodulation system,” Acta Photonica Sinica, 2015, 44(1): 91-97.

[14] Z. Y. Luo, L. F. Yang, and Y. C. Chen, “Phase-shift algorithm research based on multiple-beam interference principle,” Acta Physica Sinica, 2005, 54(7): 3051-3057.

[15] C. Ma and L. Xu, “Film thickness measurement by improved Michelson interferometer,” Optical Instruments, 2012, 34(1): 85-90.

[16] H. F. Du, X. Y. Sun, Y. W. Hu, X. Dong, and J. Zhou, “High sensitive refractive index sensor based on cladding etched photonic crystal fiber Mach-Zehnder interferometer,” Photonic Sensors, 2019, 9(2): 126-134.

[17] S. Chatterjee and Y. P. Kumar, “Measurement of the surface form error of a spherical surface with a wedge phase shifting Fizeau interferometer,” Photonic Sensors, 2013, 42(2): 122-127.

[18] L. Walter, “Silicon microstructuring technology,” Materials Science and Engineering:R:Reports, 1996, 17(1): 1-55.