[1] R Y ZHONG, X XU, E KLOTZ et al. Intelligent manufacturing in the context of industry 4.0: A review. Engineering, 3, 616-630(2017).
[2] Fanping SUI, Ruiqi GUO, Zhizhou ZHANG et al. Deep reinforcement learning for digital materials design. ACS Materials Letters, 3, 1433-1439(2021).
[3] S NIKBAKT. , KAMARIAN S, SHAKERI M. A review on optimization of composite structures Part I: Laminated composites. Composite Structures, 195, 158-185(2018).
[4] Qiqi LI, Lijiang WU, Lin HU et al. Axial compression performance of a bamboo-inspired porous lattice structure. Thin-Walled Structures, 180, 109803(2022).
[5] J GENG. Structured-light 3D surface imaging: a tutorial. Advances in Optics and Photonics, 3, 128-160(2011).
[6] S S GORTHI, P RASTOGI. Fringe projection techniques: Whither we are?. Optics and Lasers in Engineering, 48, 133-140(2010).
[7] Jing XU, Song ZHANG. Status, challenges, and future perspectives of fringe projection profilometry. Optics and Lasers in Engineering, 135, 106193(2020).
[8] P WISSMANN, F FORSTER, R SCHMITT. Fast and low-cost structured light pattern sequence projection. Optics Express, 19, 24657-24671(2011).
[9] S HEIST, A MANN, P KÜHMSTEDT et al. Array projection of aperiodic sinusoidal fringes for high-speed three-dimensional shape measurement. Optical Engineering, 53, 112208(2014).
[10] Xiaoyu HE, Dongliang ZHENG, Kemao QIAN et al. Quaternary gray-code phase unwrapping for binary fringe projection profilometry. Optics and Lasers in Engineering, 121, 358-368(2019).
[11] Shichao YANG, Han Lin HUANG, Gaoxu WU et al. High-speed three-dimensional shape measurement with inner shifting-phase fringe projection profilometry. Chinese Optics Letters, 20, 112601(2022).
[12] Chao ZUO, Tianyang TAO, Shijie FENG et al. Micro Fourier Transform Profilometry (μFTP): 3D shape measurement at 10 000 frames per second. Optics and Lasers in Engineering, 102, 70-91(2018).
[13] Yajun WANG, J I LAUGHNER, I R EFIMOV et al. 3D absolute shape measurement of live rabbit hearts with a superfast two-frequency phase-shifting technique. Optics Express, 21, 5822-5832(2013).
[14] Shuangyan LEI, Song ZHANG. Flexible 3-D shape measurement using projector defocusing. Optics Letters, 34, 3080-3082(2009).
[15] Zhoujie WU, Haoran WANG, Feifei CHEN et al. Dynamic 3D shape reconstruction under complex reflection and transmission conditions using multi-scale parallel single-pixel imaging. Light: Advanced Manufacturing, 5, 1-12(2024).
[16] Zhoujie WU, Wenbo GUO, Qican ZHANG. Two-frequency phase-shifting method vs. Gray-coded-based method in dynamic fringe projection profilometry: A comparative review. Optics and Lasers in Engineering, 153, 106995(2022).
[17] S HEIST, P LUTZKE, I SCHMIDT et al. High-speed three-dimensional shape measurement using GOBO projection. Optics and Lasers in Engineering, 87, 90-96(2016).
[18] Zhoujie WU, Wenbo GUO, Qican ZHANG et al. Time-overlapping structured-light projection: high performance on 3D shape measurement for complex dynamic scenes. Optics Express, 30, 22467-22486(2022).
[19] Bing PAN, Kemao QIAN, Huimin XIE et al. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review. Measurement Science and Technology, 20, 006201(2009).
[20] Sutton M A, TEU J J, SCHREIER H. Image Crelation f Shape, Motion Defmation Measurements: Basic Concepts, They Applications[M]. New Yk: Springer Science Business Media, 2009.
[21] F SHADMEHRI, S V HOA. Digital image correlation applications in composite automated manufacturing, inspection, and testing. Applied Sciences, 9, 2719(2019).
[22] PAN Bing, WU Dafang, YU Liping. Optimization of a threedimensional digital image crelation system f defmation measurements in extreme environments[J]. Applied Optics , 51(19), 44094419.
[23] Bing PAN. Digital image correlation for surface deformation measurement: historical developments, recent advances and future goals. Measurement Science and Technology, 29, 082001(2018).
[24] A MENDOZA, J SCHNEIDER, E PARRA et al. Differentiating 3D textile composites: A novel field of application for digital volume correlation. Composite Structures, 208, 735-743(2019).
[25] E BAR-KOCHBA, J TOYJANOVA, E ANDREWS et al. A fast iterative digital volume correlation algorithm for large deformations. Experimental Mechanics, 55, 261-274(2015).
[26] Weiling ZHANG, Mengqiao XU, Tianyu YUAN et al. Dual-biprism-based single-camera high-speed 3D-digital image correlation for deformation measurement on sandwich structures under low velocity impact. Reviews on Advanced Materials Science, 62, 20230136(2023).
[27] S SEO, Y KO, M CHUNG. Evaluation of field applicability of high-speed 3D digital image correlation for Shock vibration measurement in underground mining. Remote Sensing, 14, 3133(2022).
[28] Lei LIU, Hongshun ZHANG, Fanwei JIAO et al. Review of optical detection technologies for inner-wall surface defects. Optics & Laser Technology, 162, 109313(2023).
[29] Zhoujie WU, Qican ZHANG. Recent progress on 3D shape and deformation measurement based on fringe projection. Liquid Crystals and Displays, 38, 730-747(2023).
[30] Cho J TAY, Chenggen QUAN, Tao WU et al. Integrated method for 3-D rigid-body displacement measurement using fringe projection. Optical Engineering, 43, 1152-1159(2004).
[31] T N NGUYEN, J M HUNTLEY, R L BURGUETE et al. Shape and displacement measurement of discontinuous surfaces by combining fringe projection and digital image correlation. Optical Engineering, 50, 101505(2011).
[32] Hongjian SHI, Hongwei JI, Guobiao YANG et al. Shape and deformation measurement system by combining fringe projection and digital image correlation. Optics and Lasers in Engineering, 51, 47-53(2013).
[33] L FELIPE-SESÉ, E LÓPEZ-ALBA, F A DÍAZ. Full-field 3D displacement and strain analysis during low energy impact tests employing a single-camera system. Thin-Walled Structures, 148, 106584(2020).
[34] L FELIPE-SESÉ, F A DÍAZ. Damage methodology approach on a composite panel based on a combination of fringe projection and 2D digital image correlation. Mechanical Systems and Signal Processing, 101, 467-479(2018).
[35] L FELIPE-SESÉ, F A DÍAZ-GARRIDO, E A PATTERSON. Exploiting measurement-based validation for a high-fidelity model of dynamic indentation of a hyperelastic material. International Journal of Solids and Structures, 97, 520-529(2016).
[36] P SIEGMANN, V ÁLVAREZ-FERNÁNDEZ, F DÍAZ-GARRIDO et al. A simultaneous in- and out-of-plane displacement measurement method. Optics Letters, 36, 10-12(2011).
[37] M A SUTTON, J H YAN, V TIWARI et al. The effect of out-of-plane motion on 2D and 3D digital image correlation measurements. Optics and Lasers in Engineering, 46, 746-757(2008).
[38] L FELIPE-SESÉ, P SIEGMANN, F A DÍAZ et al. Simultaneous in-and-out-of-plane displacement measurements using fringe projection and digital image correlation. Optics and Lasers in Engineering, 52, 66-74(2014).
[39] Shijie FENG, Liang ZHANG, Chao ZUO et al. High dynamic range 3D measurements with fringe projection profilometry: a review. Measurement Science and Technology, 29, 122001(2018).
[40] Chao ZUO, Lei HUANG, Minliang ZHANG et al. Temporal phase unwrapping algorithms for fringe projection profilometry: A comparative review. Optics and Lasers in Engineering, 85, 84-103(2016).
[41] M HALIOUA, H C LIU. Optical three-dimensional sensing by phase measuring profilometry. Optics and Lasers in Engineering, 11, 185-215(1989).
[42] Song ZHANG. Flexible 3D shape measurement using projector defocusing: extended measurement range. Optics Letters, 35, 934-936(2010).
[43] G SANSONI, M CAROCCI, R RODELLA. Three-dimensional vision based on a combination of gray-code and phase-shift light projection: analysis and compensation of the systematic errors. Applied Optics, 38, 6565-6573(1999).
[44] Bing PAN, Huimin XIE, Zhaoyang WANG. Equivalence of digital image correlation criteria for pattern matching. Applied Optics, 49, 5501-5509(2010).
[45] Bing PAN, Zhaoyang WANG, Zixing LU. Genuine full-field deformation measurement of an object with complex shape using reliability-guided digital image correlation. Optics Express, 18, 1011-1023(2010).
[46] H LU, P CARY. Deformation measurements by digital image correlation: Implementation of a second-order displacement gradient. Experimental Mechanics, 40, 393-400(2000).
[47] Zhifeng ZHANG, Yilan KANG, Huaiwen WANG et al. A novel coarse-fine search scheme for digital image correlation method. Measurement, 39, 710-718(2006).
[48] Chengpeng ZHU, Shanshan YU, Cong LIU et al. Error estimation of 3D reconstruction in 3D digital image correlation. Measurement Science and Technology, 30, 025204(2019).
[49] H A BRUCK, S R MCNEILL, M A SUTTON et al. Digital image correlation using newton-raphson method of partial differential correction. Experimental Mechanics, 29, 261-267(1989).
[50] Yihao ZHOU, Bing PAN, Yanqiu CHEN. Large deformation measurement using digital image correlation: a fully automated approach. Applied Optics, 51, 7674-7683(2012).
[51] Bing PAN, Kai LI, Wei TONG. Fast, robust and accurate digital image correlation calculation without redundant computations. Experimental Mechanics, 53, 1277-1289(2013).
[52] Jielin LI, L G HASSEBROOK, Chun GUAN. Optimized two-frequency phase-measuring-profilometry light-sensor temporal-noise sensitivity. Journal of the Optical Society of America A, 20, 106-115(2003).
[53] Nenqing LYU, Haotian YU, Xinya XU et al. Structured light 3-D sensing for scenes with discontinuous reflectivity: error removal based on scene reconstruction and normalization. Optics Express, 31, 20134-20149(2023).
[54] Bing PAN, Huimin XIE, Zhaoyang WANG et al. Study on subset size selection in digital image correlation for speckle patterns. Optics Express, 16, 7037-7048(2008).
[55] Zhoujie WU, Wenbo GUO, Yueyang LI et al. High-speed and high-efficiency three-dimensional shape measurement based on gray-coded light. Photonics Research, 8, 819-829(2020).
[56] Zhoujie WU, Wenbo GUO, Bing PAN et al. A DIC-assisted fringe projection profilometry for high-speed 3D shape, displacement and deformation measurement of textured surfaces. Optics and Lasers in Engineering, 142, 106614(2021).
[57] Zhoujie WU, Wenbo GUO, Zhengdong CHEN et al. Three-dimensional shape and deformation measurement on complex structure parts. Scientific Reports, 12, 7760(2022).
[58] Zhoujie WU, Zhengdong CHEN, Zhaosheng CHEN et al. Chromatic DIC-assisted fringe projection profilometry for shape, deformation, and strain measurement with intensity-chroma space analysis. IEEE Transactions on Instrumentation and Measurement, 72, 1-13(2023).
[59] Zhengdong CHEN, Xunren LI, Haoran WANG et al. Multi-dimensional information sensing of complex surfaces based on fringe projection profilometry. Optics Express, 31, 41374-41390(2023).
[60] Dongliang ZHENG, Qian KEMAO, Jing HAN et al. High-speed phase-shifting profilometry under fluorescent light. Optics and Lasers in Engineering, 128, 106033(2020).
[61] P T KREIN, R S BALOG, M MIRJAFARI. Minimum energy and capacitance requirements for single-phase inverters and rectifiers using a ripple port. IEEE Transactions on Power Electronics, 27, 4690-4698(2012).
[62] Bing PAN, Huimin XIE, Zhiqing GUO et al. Full-field strain measurement using a two-dimensional Savitzky-Golay digital differentiator in digital image correlation. Optical Engineering, 46, 033601(2007).
[63] Li MA, Ange WEN, Chuanchuan SHEN. Wrinkles in fiber-reinforced resin composites: Micro-stress non-destructive testing. Acta Materiae Compositae Sinica, 39, 3590-3602(2022).
[64] Bing PAN, Zixing LU, Huimin XIE. Mean intensity gradient: An effective global parameter for quality assessment of the speckle patterns used in digital image correlation. Optics and Lasers in Engineering, 48, 469-477(2010).
[65] Lingyun QIAN, Jiajia DU, Peipei LI et al. Fracture prediction of high-strength steel sheet during in-plane compression-shear forming under negative stress triaxiality. Archives of Civil and Mechanical Engineering, 24, 60(2024).
