• Chinese Optics Letters
  • Vol. 14, Issue 3, 031402 (2016)
Shaoshuai Sui, Mingying Tang, Yuede Yang, Jinlong Xiao, Yun Du, and Yongzhen Huang*
Author Affiliations
  • The State Key Laboratory on Integrated Optoelectronics, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China
  • show less
    DOI: 10.3788/COL201614.031402 Cite this Article Set citation alerts
    Shaoshuai Sui, Mingying Tang, Yuede Yang, Jinlong Xiao, Yun Du, Yongzhen Huang. Single-mode hybrid AlGaInAs/Si octagonal-ring microlaser with stable output[J]. Chinese Optics Letters, 2016, 14(3): 031402 Copy Citation Text show less
    Two-dimensional schematic diagram used in the numerical simulation, and (b) the calculated internal-field intensity spectra at R=0 and 15 μm.
    Fig. 1. Two-dimensional schematic diagram used in the numerical simulation, and (b) the calculated internal-field intensity spectra at R=0 and 15 μm.
    Internal mode intensity distribution |Hy|2 at R=0 for (a) fundamental transverse mode at 1551.47 nm and (b) first-order transverse mode at 1550.82 nm.
    Fig. 2. Internal mode intensity distribution |Hy|2 at R=0 for (a) fundamental transverse mode at 1551.47 nm and (b) first-order transverse mode at 1550.82 nm.
    Mode Q-factor versus the inner radius R for fundamental (squares) and first-order (triangles) transverse modes.
    Fig. 3. Mode Q-factor versus the inner radius R for fundamental (squares) and first-order (triangles) transverse modes.
    Normalized intensity versus the angular momentum index m for (a) the fundamental and (b) the first-order transverse modes. Positive (negative) values of m correspond to CCW (CW) traveling-wave components.
    Fig. 4. Normalized intensity versus the angular momentum index m for (a) the fundamental and (b) the first-order transverse modes. Positive (negative) values of m correspond to CCW (CW) traveling-wave components.
    (a) Top-view SEM image after the first-step ICP etching to the BCB bonding layer. (b) Top-view microscope image after metal electrode deposition. (c) Cross-sectional view SEM image of hybrid octagonal-ring laser coupled to a silicon waveguide.
    Fig. 5. (a) Top-view SEM image after the first-step ICP etching to the BCB bonding layer. (b) Top-view microscope image after metal electrode deposition. (c) Cross-sectional view SEM image of hybrid octagonal-ring laser coupled to a silicon waveguide.
    (a) Peak powers from the silicon waveguide versus the pulsed injection current. (b) Lasing spectra at pulsed injection currents of 13, 25, and 32 mA.
    Fig. 6. (a) Peak powers from the silicon waveguide versus the pulsed injection current. (b) Lasing spectra at pulsed injection currents of 13, 25, and 32 mA.
    Shaoshuai Sui, Mingying Tang, Yuede Yang, Jinlong Xiao, Yun Du, Yongzhen Huang. Single-mode hybrid AlGaInAs/Si octagonal-ring microlaser with stable output[J]. Chinese Optics Letters, 2016, 14(3): 031402
    Download Citation