Laser Remelting Effect on Casting and CMT Surfacing Babbitt Metal Microstructure

Dewei Deng; Junyu Wang; Fanmin Meng; Hongming Wan; Qi Sun; Yong Zhang

doi:10.3788/LOP222034

[1] Qin Z, Zhao Z W, Wei H D et al. Research progress and preparation techniques of Babbitt metal[J]. Hot Working Technology, 45, 10-14(2016).

[2] Gao Y P, Wang J M, Liu Y Y. Interfacial fracture toughness measurement of welded Babbitt alloy SnSb11Cu6/20 steel[J]. Fatigue & Fracture of Engineering Materials & Structures, 44, 1837-1849(2021).

[3] Song Z Y, Zhang L C, Liu Y et al. Improved microstructure and bonding strength via MIG arc brazing in Sn-based Babbitt layer for bearing fabrication[J]. Materials Research Express, 6, 116558(2019).

[4] Tillmann W, Hagen L, Abdulgader M et al. Microstructural characteristics in Babbitt coatings deposited by LPCS[J]. Coatings, 10, 689(2020).

[5] Alcover P R C,, Pukasiewicz A G M. Evaluation of microstructure, mechanical and tribological properties of a Babbitt alloy deposited by arc and flame spray processes[J]. Tribology International, 131, 148-157(2019).

[6] Hao Y B, Wang J, Yang P et al. Microstructures and properties of tin-based Babbitt metal prepared by laser cladding deposition[J]. Chinese Journal of Lasers, 47, 0802009(2020).

[7] Hao Y B, Zhao K, Yang P et al. Microstructure and mechanical properties of tin-based Babbitt alloy made by laser cladding deposition[J]. The Chinese Journal of Nonferrous Metals, 28, 2016-2023(2018).

[8] Zhao X K, Hai X S. Microstructure and tribological behavior of the nickel-coated-graphite-reinforced Babbitt metal composite fabricated via selective laser melting[J]. International Journal of Minerals, Metallurgy and Materials, 29, 320-326(2022).

[9] Zhao X K, Lai R, Hai X S. A study on the microstructures and properties of selective laser melted Babbitt metals[J]. Journal of Materials Engineering and Performance, 28, 5433-5440(2019).

[10] Ghasemi F, Moazami-Goudarzi M, Najafi H. Microstructures, hardening and tribological behaviors of tin matrix composites reinforced with SiC and Zn particles[J]. Rare Metals, 40, 2584-2592(2021).

[11] Dong Q, Yin Z W, Li H L et al. Effects of Ag micro-addition on structure and mechanical properties of Sn-11Sb-6Cu Babbitt[J]. Materials Science and Engineering: A, 722, 225-230(2018).

[12] Yao J H, Huang J B, Wang G H et al. Pulsed laser polishing mechanism on high roughness surface cut by wire electrical discharge machining[J]. Chinese Journal of Lasers, 48, 1402003(2021).

[13] Zhu Z Y, Chen H, Ma Y L et al. Effects of pulsed laser on the microstructure and fatigue properties of B950CF high-strength steel hybrid welding joint[J]. Chinese Journal of Lasers, 48, 1402006(2021).

[14] Bian Y C, Peng Y B, Song L F et al. Heterogeneity of 316L/IN718 formed via selective laser melting based on laser remelting optimization process[J]. Chinese Journal of Lasers, 48, 1802009(2021).

[15] Zhang W. Research on microstructure and hardness of tin-base Babbitt alloy made by laser remelting[J]. Hot Working Technology, 44, 32-34(2015).

[16] Ni Y Q, Dong G N, Tong Z et al. Effect of laser remelting on tribological properties of Babbitt alloy[J]. Materials Research Express, 6, 096570(2019).

[17] Goudarzi M M, Jahromi S A J, Nazarboland A. Investigation of characteristics of tin-based white metals as a bearing material[J]. Materials & Design, 30, 2283-2288(2009).

[18] Wu J H, Du X M, Tian J H et al. Microstructure and properties of interface between Sn Sb8Cu5 Babbitt pulsed MIG surfacing layer and substrate[J]. Welding Technology, 49, 5, 26-30(2020).

[19] Wei M Z, Sun K, Zhang X L et al. Microstructure and bonding strength of tin-based Babbitt alloy on ASTM 1045 steel by MIG arc brazing[J]. Journal of Adhesion Science and Technology, 32, 2150-2161(2018).

[20] Chai X H, Sun Z P, Zhang C. Progress in microstructure and properties of laser remelting alloys[J]. Special Casting＆Nonferrous Alloys, 39, 608-612(2019).

[21] Chawla N, Shen Y L. Mechanical behavior of particle reinforced metal matrix composites[J]. Advanced Engineering Materials, 3, 357-370(2001).

[22] Dai L H, Ling Z, Bai Y L. Size-dependent inelastic behavior of particle-reinforced metal-matrix composites[J]. Composites Science and Technology, 61, 1057-1063(2001).