Research on effective temperature calculation method of annular fuel cell

Zhao CHEN; Yingjie XIAO; Pengcheng ZHAO; Liangxing PENG

doi:10.11889/j.0253-3219.2022.hjs.45.120603

[1] Kazimi M S, Hejzlar P, Carpenter D M et al. High performance fuel design for next generation PWRs[R]. Nuclear Fuel Cycle Code(2006).

[2] Yuan Y. The design of high power density annular fuel for LWRs[D](2004).

[3] Lahoda E, Mazzoccoli J, Beccherle J. High-power-density annular fuel for pressurized water reactors: manufacturing costs and economic benefits[J]. Nuclear Technology, 160, 112-134(2007).

[4] Blinkov V N, Boltenko E A, Elkin I V et al. Prospects for using annular fuel elements in nuclear power engineering[J]. Thermal Engineering, 57, 213-218(2010).

[5] Deng Y B, Wu Y W, Zhang D L et al. Development of a thermal-mechanical behavior coupling analysis code for a dual-cooled annular fuel element in PWRs[J]. Nuclear Engineering and Design, 301, 353-365(2016).

[6] Han K H, Chang S H. Development of a thermal-hydraulic analysis code for annular fuel assemblies[J]. Nuclear Engineering and Design, 226, 267-275(2003).

[7] Feng D D, Hejzlar P, Kazimi M S. Thermal-hydraulic design of high-power-density annular fuel in PWRs[J]. Nuclear Technology, 160, 16-44(2007).

[8] DIAO Junhui, JI Songtao, ZHANG Yingchao. Development and verification of thermal-hydraulic analysis code for annular fuel[J]. Atomic Energy Science and Technology, 49, 1051-1056(2015).

[9] Wu P, Zhang L X, Shan J Q et al. Researches on special thermal hydraulic phenomena of annular fuel assembly by sub-channel analysis code-NACAF[J]. Frontiers in Energy Research, 9, 421(2021).

[10] YIN Qiang, CHAI Xiaoming, TU Xiaolan et al. Research of simulation program FRET for fuel rod resonance effective temperature mechanism[J]. Nuclear Power Engineering, 35, 194-196(2014).

[11] Pirouzmand A, Roosta F. Calculation of radial burnup and nuclides atom density distributions in a VVER-1000 fuel rod using Monte Carlo method[J]. Progress in Nuclear Energy, 88, 321-331(2016).

[12] Lemes M, Soba A, Denis A. An empirical formulation to describe the evolution of the high burnup structure[J]. Journal of Nuclear Materials, 456, 174-181(2015).

[13] Yuan C X, Wang X M, Chen S L. A simple formula for local burnup and isotope distributions based on approximately constant relative reaction rate[J]. Science and Technology of Nuclear Installations, 2016, 6980547(2016).

[14] Chen S L, Ge Y L, Zhong Y et al. Radial distributions of power and fuel temperature in annular U3Si2 fuel with FeCrAl cladding[J]. Annals of Nuclear Energy, 135, 106943(2020).

[15] YU Pingan, ZHU Ruian, YU Zhenwan et al[M]. Thermal analysis of nuclear reactor(2002).

[16] Yang Y S, Shin C H, Chun T H et al. Evaluation of a dual-cooled annular fuel heat split and temperature distribution[J]. Journal of Nuclear Science and Technology, 46, 836-845(2009).

[17] Todreas N E, Kazimi M S. Nuclear systems[M]. Volume1: thermal hydraulic fundamentals(2021).

[18] Chen S L, Yuan C X, Guo D X. Radial distributions of power and isotopic concentrations in candidate accident tolerant fuel U3Si2 and UO2/U3Si2 fuel pins with FeCrAl cladding[J]. Annals of Nuclear Energy, 124, 460-471(2019).